Thread
:
[HW-FIX] losing time/date on battery swap? Replace bupbat
View Single Post
joerg_rw
2015-10-15 , 20:24
Posts: 2,222 | Thanked: 12,651 times | Joined on Mar 2010 @ SOL 3
#
24
which bupbat you are using? The polyacene capacitor type is not supposed to provide nearly as long a backup as the original LiMg cell. Anyway I'll try to find the data and do the math how long actually
to start with:
PAS414 CAP PAS COIN-TYPE 3.3V 0.07F
0.07 As/V * 3 V * 3 V = 0.63 VAs; aka Ws aka J (actually * 0.5 since voltage drops linear with discharge)
0.63 Ws / 7.2E-6 W = 87.5E3 s = 24 h (* 0.5; assuming the capacitor could power the VBRTC domain until voltage = 0, so actually probably another time half of that, ~6h in the end)
Anyway BB_CFG register reset default is 0b00000000, for polyacene cap PAS414 (!!!) I suggest setting it to 0b00011111 as soon as possible during boot
__________________
Maemo Community Council
member [2012-10, 2013-05, 2013-11, 2014-06 terms]
Hildon Foundation Council
inaugural member.
MCe.V. foundation member
EX
Hildon Foundation approved
Maemo Administration Coordinator
(stepped down due to bullying 2014-04-05)
aka "techstaff" - the guys who keep your infra running
-
Devotion to Duty
http://xkcd.com/705/
IRC(freenode): DocScrutinizer*
First USB hostmode fanatic, father of
H-E-N
Last edited by joerg_rw; 2015-10-15 at
21:02
.
Quote & Reply
|
The Following 3 Users Say Thank You to joerg_rw For This Useful Post:
peterleinchen
,
pichlo
,
sixwheeledbeast
joerg_rw
View Public Profile
Visit joerg_rw's homepage!
Find all posts by joerg_rw