I've just got an N810 and want to flash to the latest release. Using the same procedure I used to do on the N800 I attempted to flash, however I got an error.
I'm using Ubuntu Gutsy, same PC that I used to flash the N800. I tried to start the flashing by plugging in the USB cable then the power cable to start flashing. I briefly saw the USB logo on the N810 screen, then it switched to charging.
Any ideas?
flasher v0.8.7 (Oct 17 2006)
SW version in image: RX-44_2008SE_2.2007.50-2_PR_MR0
Image 'kernel', size 1529984 bytes
Version 2.6.21.0-200749osso2
Image 'initfs', size 1954560 bytes
Version 0.95-70
Image 'rootfs', size 137625600 bytes
Version RX-34+RX-44_2008SE_2.2007.50-2_PR_MR0
Image '2nd', size 8192 bytes
Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
Version 1.1.7-2
Image 'xloader', size 9088 bytes
Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
Version 1.1.7-2
Image 'secondary', size 99968 bytes
Valid for RX-44: 0801, 0802, 0803, 0804, 0805, 0806, 0901, 0902
Version 1.1.7-2
Suitable USB device not found, waiting
USB device found found at bus 005, device address 002
Error setting alternate interface 2: Protocol error
I've just got an N810 and want to flash to the latest release. Using the same procedure I used to do on the N800 I attempted to flash, however I got an error.
I'm using Ubuntu Gutsy, same PC that I used to flash the N800. I tried to start the flashing by plugging in the USB cable then the power cable to start flashing. I briefly saw the USB logo on the N810 screen, then it switched to charging.
Any ideas?