Active Topics

 


Reply
Thread Tools
Posts: 4 | Thanked: 1 time | Joined on May 2010
#1
Hi everybody,
I flash my N900 with flasher-3.5 and I put RX-51_2009SE_3.2010.02-8.003_PR_COMBINED_003_ARM.bin as firmware image; but when the flashing finish with success, my N900 still reboot and reboot with non stop, it can't stay ON. Please can somebody help me.
Thank's
 
Posts: 75 | Thanked: 18 times | Joined on Mar 2010 @ Malta
#2
Was this happening before you flashed it? Have you tried flashing it again maybe there was some problem during the process.
 

The Following User Says Thank You to fieryriver For This Useful Post:
Posts: 4 | Thanked: 1 time | Joined on May 2010
#3
No it didn't happening before flashing; and i flash it again and again but always the same problem. I try an other firmware image but also the same problem
 
Posts: 4 | Thanked: 1 time | Joined on May 2010
#4
No it didn't happening before flashing; and i flash it again and again but always the same problem. I try an other firmware image but also the same problem
 
Posts: 4 | Thanked: 1 time | Joined on May 2010
#5
thank you fieryriver for replying me;
its ok i solve the problem. I erase my older version of flasher-3.5 and i download again the flasher-3.5 with the older firmware image and i flash it, and the N900 start normally. after i will update the firmware. thank you again
 

The Following User Says Thank You to MoSa1109 For This Useful Post:
Posts: 303 | Thanked: 175 times | Joined on Oct 2009 @ London UK
#6
You didn't mention flashing the emmc.. Failing to flash the emmc immediately after flashing the OS can cause rebooting problems.. especially if the phone wasn't working before flashing
 
Reply


 
Forum Jump


All times are GMT. The time now is 19:39.