ahmed.sadek | # 1 | 2011-05-10, 15:12 | Report

Dear All,

I have a big problem now. I flashed the device using the latest images, and then I installed Enhanced Linux Kernel for power users, when I tried to uninstall it from the Application manager (I knew after that that it is wrong), the device always restarted. I tried to flash it again, but the flasher says 'Suitable usb device not found, waiting' after it tells:
flasher v2.5.2 (Oct 21 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus 001, device address 025.
Found device RX-51, hardware revision 2104
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_20.2010.36-2.003_PR_003
Booting device into flash mode.
Suitable USB device not found, waiting.

Despite I used the same images that was successful before. I tried to do that on Windows machine, it always gives me the sound indication as pluging the n900 and unplugging it again in infinite loop. The output I listed above is from Ubuntu 9.04 machine (not VM). I enabled the RD mode, and it always reboot after saying:
no initfs \o/

I disabled the RD mode, because it always restart when the battery is installed and the only way to switch off the device is by taking the battery out of it.

I do not know what to do to get it work again. might anyone help please ?

shardul | # 2 | 2011-05-10, 15:32 | Report

Are you using 64-bits windows.

XiliX | # 3 | 2011-05-10, 15:36 | Report

there are a load of threads about just this problem. please use the search button.

Good luck!

ahmed.sadek | # 4 | 2011-05-10, 15:36 | Report

no 32 bit windows version.

ahmed.sadek | # 5 | 2011-05-10, 15:40 | Report

I successfully flashed it before, using the same machine.

dmardsinra | # 6 | 2011-05-10, 15:41 | Report

I have a problem wiht my N900..... I tried to install N12, and on the process something went wrong... and when i restart....there is multiboot with 1 and 2 option but it doesn't work.... and as i searched..i found that i have to press 0 ..... and i could see maemo (default) BOOTING- PLEASE WAIT......but after that....been waiting for like 15 mins....it doesnt go......



any help in here..pls? thanks

shardul | # 7 | 2011-05-10, 16:06 | Report

Try to use it with another machine.

dmardsinra | # 8 | 2011-05-10, 16:07 | Report

same problem as yours in mine as well

ahmed.sadek | # 9 | 2011-05-10, 16:15 | Report

I tried it with 3 machines.

shardul | # 10 | 2011-05-10, 16:17 | Report

Then go to nokia center this is the only option left for you.