Mentalist Traceur | # 771 | 2011-06-06, 19:41 | Report

Way to turn almost every single pentester (and many people in general) against you.

That is downright asinine. It's already bad enough to hack other people's networks without permission, it's even worse when you're at a place where internet plans aren't typically unlimited, and you're going to cause them extra expenditures just because you wanted free internet.

Somehow I don't see that as realistic. If it was that easy, people would've discovered it way before the injection-capable drivers were released. (Now, I think there was something like injection working on channel 6 with the stock driver... may have to do with your perceived success.)

pusak gaoq | # 772 | 2011-06-06, 19:52 | Report

WRONG!!!! you need power kernel if you want to use fAircrack....
how can you tell other member you can use fAircrack without power kernel while yourself using power kernel 46 on your phone....

StefanL | # 773 | 2011-06-06, 20:58 | Report

If you read the code for the enable injection button you can see that it loads the modified wifi drivers; hence the power kernel is not needed


Here is the direct quote from the first post :
------------------------ Prerequisites ----------------------------------------

Mostly the same as for my FAS script. You will need:
> PyQt
> Sudser
> Aircrack-ng
> John the Ripper
> Bleeding-edge packet injection drivers by lxp
> Macchanger (optional)

---

Last edited by StefanL; 2011-06-06 at 22:58.

StefanL | # 774 | 2011-06-06, 21:02 | Report

Wow,

getting a lot of flack on this thread today .

Any of you guys been able to test my modified scripts a few posts back in this thread or check the signature and report back? Pretty please . Its no fun doing all this coding if nobody appreciates it

---

Last edited by StefanL; 2011-06-06 at 21:08.

StefanL | # 775 | 2011-06-06, 21:16 | Report

There is a whole thread on the bleeding edge wifi drivers, just use the search feature in the top right hand corner. Sorry i can't give you much more details, it has been awhile since I looked into it. The relevant thread will explain everything you need in plenty of detail. Alternative is to have power kernel 46.

Faicrack expects the location of the load.sh of the bleeding edge wifi drivers to be in /home/user/MyDocs/wl1251-maemo/binary/compat-wireless/ (as per FAS script load.sh that is called when you hit the injection enable button).

---

Last edited by StefanL; 2011-06-06 at 21:25.

StefanL | # 776 | 2011-06-06, 21:29 | Report

Well, will check if it only works on channel 6 when I get a chance again in a couple of weeks, but as far as I understand the power kernel 46 includes the proper injection drivers. There is a thread named something like "Power kernel 46 now with bleeding edge injection drivers" as far as I can remember from a few months back which is what prompted me to finally install power kernel 46.

---

Last edited by StefanL; 2011-06-06 at 22:55.

kl2010 | # 777 | 2011-06-07, 09:12 | Report

will be glad if anyone one can help me out.

i have followed the steps as outlined in post 1,

but my problem is that everytime i start faircrack, the GUI comes up but when i pres any of the buttons NOTHING HAPPENS.

THE MAC ADDRESS BOX IS BLANK!
IN THE ACCESS TAB, WHEN I CLICK ON SCAN NOTHING HAPPENS! THE SMALL REMAIN BLANK!

ALSO all the other buttons like start packet capture, authenticate, start packet injection -- are all gray out.

any help will be appreciated. thanks.

kl2010 | # 778 | 2011-06-07, 09:14 | Report

however, aircrack commands like airodump, airmon-ng seems ok in x-terminal

---

Last edited by kl2010; 2011-06-07 at 09:30.

stevomanu | # 779 | 2011-06-07, 09:40 | Report

my maccadress was blank because i never had macccahnger installed as for other issues have you got osso wlan installed ??

StefanL | # 780 | 2011-06-07, 11:43 | Report

There is a problem with a faircrack0.3 script which does not show the units mac when the gui first loads and will only show it once you press the injection enable button. I posted a fix for it in an earlier post. Make sure you have your wlan enabled, it looks like your wifi radio is down.