N9 [Shipping]: It's finally here [for some]!

Member's Online

Page 274 of 1048 | Prev | 264 272 273 274 275 276 284 | Next | Last

unfuccwittable | # 2731 | 2011-07-27, 23:41 | Report

Originally Posted by danramos View Post

I almost never actually, genuinely laugh out loud. This time, I did. Kudos, lad. That deserved a thanks.

ditto, I don't have a problem with trolling when it's hilarious.

The Following 2 Users Say Thank You to unfuccwittable For This Useful Post:
danramos, Pillum

recluse | # 2732 | 2011-07-28, 03:05 | Report

Clue:
Read the screen

The Following User Says Thank You to recluse For This Useful Post:

gerbick | # 2733 | 2011-07-28, 03:18 | Report

Originally Posted by recluse View Post

Clue:
Read the screen

Where the hell did that image come from?

chase15 | # 2734 | 2011-07-28, 03:34 | Report

Originally Posted by gerbick View Post

Where the hell did that image come from?

here : 1:30 http://www.youtube.com/watch?v=LxUymqLGG-M

The Following User Says Thank You to chase15 For This Useful Post:

jalyst | # 2735 | 2011-07-28, 03:42 | Report

@daperl

Do we definitely know the N950 (& subsequently the N9) are using wl1271/3 or wl1271/3L?
Or is it possible that one or the other or both are using an entirely different radio?

If it's definitely from that family....
Then according to DeeGee's findings, it's not possible for it to be the 1271/3L (L denotes BT4).
And therefore it's not possible that the N950/N9 are a/b/g/n + BT4, but only a/b/g/n + BT2.1.

Or is this good enough proof that the N9 does BT4.0?
I guess we'll only know what radio it uses, when someone show us the dmesg for their N9?
Sigh...

jalyst | # 2736 | 2011-07-28, 04:04 | Report

Originally Posted by danramos View Post

The N9 hasn't shipped. There aren't any throngs of satisfied customers so I'm not sure why anyone's claiming it's incredible until they've had it in their paws. I remain skeptical of it as a whole--especially as this abomination device between Maemo and MeeGo.

No one's clamoring, we just want to see what it's like, & draw our conclusions then.
You're the only one convinced of it's condition before it's out, far more than anyone else.

An abomination between meego/maemo?
Why do you keep talking about that red-herring.
As if that's some kind of massive tragedy...
It's still freaking maemo6 + meego-core compatibility layer, you still don't get that?

The open Vs closed question has been answered.
There's little to no difference there, yet you still choose to ignore that?

Base and Middle-ware's still basically just as open/closed.
UI's a bit more closed than Maemo, but it's not as though Maemo's UI was ever a 'beacon of openness'.
And why does everything have to be open anyway?
If something is advertised as open, doesn't mean it's suggesting "open slather" open.
Anyone that knows the OSS world & it's history, knows that's rarely the case, nor practical.

Plus if you'd made any attempt at following developments in the MeeGo community.
You'd know that the closed UI is somewhat of a misnomer, based on developments actually occurring wrt that.
But I'll let you read-up to understand what I'm talking about there.

Originally Posted by

Your mileage may, indeed, vary--but based on specs and details alone I'm not sure there's anything you can tell me that makes my opinion any less personal and invalid.

You're not wrong there...
In the face of any positive developments, you've only ever had eyes for negative ones.

Originally Posted by

This is also the relevance to what we're discussing--there are barely any people who can comment. You aim to dismiss dissenting opinion but I think daperl was one of the few (don't remember the others) with a good valid set of experiences based on actually using one and THAT observation was valuable.

And yet none of the real-word experiences shared, have been the slightest bit appeasing.
CBF'd addressing all the other 'broken record' points...
Same stuff that's been addressed time and time again.

You're already convinced in your position, & nothing that can be said will change that.
You're just hoping to take a few people with you on your way out the door.
c0d3rr0r will eagerly come, take him with you won't you?

I'll be out soon too, but I do things in halves, not absolutes.
So I'll pop back in from time-to-time, after playing about with Android/iOS etc. again.

Last edited by jalyst; 2011-07-28 at 04:46.

The Following User Says Thank You to jalyst For This Useful Post:
Soppa

daperl | # 2737 | 2011-07-28, 04:08 | Report

Originally Posted by jalyst View Post

I guess we'll only know what radio it uses, when someone show us the dmesg for their N9?
Sigh...

I can't give you a dmesg from an n9, but here's the beginning of one from an n950:

Code:

[    0.039428] Mount-cache hash table entries: 512
[    0.039794] Initializing cgroup subsys memory
[    0.039855] Initializing cgroup subsys freezer
[    0.039886] CPU: Testing write buffer coherency: ok
[    0.040405] devtmpfs: initialized
[    0.044799] regulator: core version 0.5
[    0.045013] NET: Registered protocol family 16
[    0.045776] RM-680 board, rev 1124
[    0.046691] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0118 -> 0x0000
[    0.046722] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0118 -> 0x0000
[    0.046752] SmartReflex class 1.5 driver: initialized
[    0.048675] OMAP DMA hardware revision 5.0
[    0.048767] Reserving DMA channels 0 and 1 for HS ROM code
[    0.051635] bio: create slab <bio-0> at 0
[    0.052124] regulator: vbat: 3700 mV 
[    0.052276] regulator: VEMMC: 2900 mV normal standby
[    0.053558] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2900 kHz
[    0.068420] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.068481] twl4030: power (irq 373) chaining IRQs 376..383
[    0.068939] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.069763] regulator: VUSB1V5: 1500 mV normal standby
[    0.069946] regulator: VUSB1V8: 1800 mV normal standby
[    0.070159] regulator: VUSB3V1: 3100 mV normal standby
[    0.072021] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.072814] regulator: VPLL1: 1800 mV normal standby
[    0.074188] regulator: VIO: 1800 mV normal standby
[    0.074432] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[    0.074707] regulator: VDAC: 1800 mV normal standby
[    0.075012] regulator: VAUX2: 1800 mV normal standby
[    0.075469] regulator: VINTANA1: 1500 mV normal standby
[    0.075958] regulator: VINTANA2: 2750 mV normal standby
[    0.076416] regulator: VINTDIG: 1500 mV normal standby
[    0.076629] regulator: VRRTC: 1500 mV normal standby
[    0.076904] regulator: VPLL2: 1800 mV normal standby
[    0.077209] regulator: VMMC2: 3000 mV normal standby
[    0.077514] regulator: VSIM: 1800 mV normal standby
[    0.077789] regulator: VAUX1: 2800 mV normal standby
[    0.078125] regulator: VAUX3: 2800 mV normal standby
[    0.078460] regulator: VAUX4: 2800 mV normal standby
[    0.078765] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[    0.079345] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
[    0.080566] Bluetooth: Core ver 2.15
[    0.080718] NET: Registered protocol family 31
[    0.080749] Bluetooth: HCI device and connection manager initialized
[    0.080780] Bluetooth: HCI socket layer initialized
[    0.081054] cfg80211: Calling CRDA to update world regulatory domain
[    0.081237] Switching to clocksource 32k_counter
[    0.082061] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
[    0.082183] HS USB OTG: revision 0x40, sysconfig 0x2015, sysstatus 0x1, intrfsel 0x1, simenable  0x0
[    0.082214] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.082244] musb_hdrc: MHDRC RTL version 1.800 
[    0.082275] musb_hdrc: 18/31 max ep, 14592/16384 memory
[    0.082305] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
[    0.082733] NET: Registered protocol family 2
[    0.082885] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.083282] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.086914] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.088043] TCP: Hash tables configured (established 131072 bind 65536)
[    0.088104] TCP reno registered
[    0.088256] NET: Registered protocol family 1
[    0.088836] dspbridge_init: 600000 bytes @ bea00000
[    0.088958] hs_init: omap_hs driver
[    0.089721] sec_init: omap_sec driver
[    0.099365] fuse init (API version 7.13)
[    0.099853] msgmni has been set to 1969
[    0.100097] Aegis: Netlink socket created
[    0.100158] restok: ready
[    0.100189] creds: ready
[    0.100219] credp: active
[    0.102844] io scheduler noop registered
[    0.102905] io scheduler anticipatory registered
[    0.102905] io scheduler deadline registered
[    0.103332] io scheduler cfq registered (default)
[    0.103820] OMAP DSS rev 2.0
[    0.103912] OMAP DISPC rev 3.0
[    0.103973] OMAP VENC rev 2
[    0.104156] OMAP DSI rev 1.0
[    0.112915] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.120483] serial8250.2: ttyS0 at MMIO 0x49020000 (irq = 74) is a TI16750
[    0.125701] brd: module loaded
[    0.128509] loop: module loaded
[    0.130065] OneNAND driver initializing
[    0.130279] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 104 MHz
[    0.130371] OneNAND Manufacturer: Samsung (0xec)
[    0.130371] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
[    0.130401] OneNAND version = 0x0232
[    0.130432] Chip support all block unlock
[    0.130432] Chip has 4KiB pagesize
[    0.130493] 6 cmdlinepart partitions found on MTD device omap2-onenand
[    0.130523] Creating 6 MTD partitions on "omap2-onenand":
[    0.130554] 0x000000000000-0x000000100000 : "bootloader"
[    0.130889] 0x000000100000-0x0000003c0000 : "config"
[    0.131164] 0x0000003c0000-0x0000013c0000 : "kernel"
[    0.131408] 0x0000013c0000-0x0000015c0000 : "log"
[    0.133697] mtdoops: Attached to MTD device 3
[    0.133758] 0x0000015c0000-0x00001e000000 : "swap"
[    0.134033] 0x00001e000000-0x000020000000 : "moslo"
[    0.134857] tun: Universal TUN/TAP device driver, 1.6
[    0.134887] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.136688] mtdoops: ready 0, 1
[    0.144500] input: ECI Accessory as /devices/virtual/input/input0
[    0.144805] i2c /dev entries driver
[    0.145324] Linux media interface: v0.10
[    0.145416] Linux video capture interface: v2.00
[    0.146728] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    0.147521] HACK: TWL5031 WDT can't be disabled. Automatic WDT refresh started
[    0.147644] cpuidle: using governor ladder
[    0.147674] cpuidle: using governor menu
[    0.148193] omap_sham_mod_init: loading omap-sham driver
[    0.148315] omap-sham omap-sham: hw accel on OMAP rev 0.9
[    0.149505] Advanced Linux Sound Architecture Driver Version 1.0.21.
[    0.152008] No device for DAI omap-mcbsp-dai-0
[    0.152038] No device for DAI omap-mcbsp-dai-1
[    0.152069] No device for DAI omap-mcbsp-dai-2
[    0.152099] No device for DAI omap-mcbsp-dai-3
[    0.152130] No device for DAI omap-mcbsp-dai-4
[    0.205047] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[    0.207733] input: dfl61-twl4030 Jack as /devices/platform/soc-audio.0/sound/card0/input1
[    0.208923] DFL61 TWL SoC init done (config 4)
[    0.209625] asoc: tlv320dac33 <-> omap-mcbsp-dai-1 mapping ok
[    0.210510] ALSA device list:
[    0.210540]   #0: dfl61-twl4030 (twl4030)
[    0.210571]   #1: dfl61-dac33 (tlv320dac33)
[    0.211120] misc iphb: Module registered in 2.6.32.39-dfl61-20112201, built Jun  1 2011 18:17:35
[    0.211212] TCP cubic registered
[    0.211242] NET: Registered protocol family 17
[    0.211303] NET: Registered protocol family 15
[    0.211364] Bluetooth: L2CAP ver 2.14
[    0.211395] Bluetooth: L2CAP socket layer initialized
[    0.211425] Bluetooth: SCO (Voice Link) ver 0.6
[    0.211425] Bluetooth: SCO socket layer initialized
[    0.211730] Bluetooth: RFCOMM TTY layer initialized
[    0.211761] Bluetooth: RFCOMM socket layer initialized
[    0.211791] Bluetooth: RFCOMM ver 1.11
[    0.211853] Power Management for TI OMAP3.
[    0.213104] SmartReflex device[1] initialized
[    0.213195] SmartReflex device[2] initialized
[    0.214141] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[    0.218627] Disabling unused clock "gpt2_ick"
[    0.218658] Disabling unused clock "gpt3_ick"
[    0.218658] Disabling unused clock "gpt4_ick"
[    0.218688] Disabling unused clock "gpt5_ick"
[    0.218688] Disabling unused clock "gpt6_ick"
[    0.218719] Disabling unused clock "gpt7_ick"
[    0.218719] Disabling unused clock "gpt8_ick"
[    0.218719] Disabling unused clock "gpt9_ick"
[    0.218750] Disabling unused clock "gpio2_dbck"
[    0.218780] Disabling unused clock "gpio3_dbck"
[    0.218780] Disabling unused clock "gpio4_dbck"
[    0.218811] Disabling unused clock "gpio5_dbck"
[    0.218811] Disabling unused clock "gpio6_dbck"
[    0.218811] Disabling unused clock "gpt9_fck"
[    0.218841] Disabling unused clock "gpt8_fck"
[    0.218841] Disabling unused clock "gpt7_fck"
[    0.218872] Disabling unused clock "gpt6_fck"
[    0.218872] Disabling unused clock "gpt5_fck"
[    0.218902] Disabling unused clock "gpt4_fck"
[    0.218902] Disabling unused clock "gpt3_fck"
[    0.218933] Disabling unused clock "gpt2_fck"
[    0.218933] Disabling unused clock "gpio1_dbck"
[    0.218963] Disabling unused clock "rng_ick"
[    0.218963] Disabling unused clock "ssi_ick"
[    0.218994] Disabling unused clock "gpt10_ick"
[    0.219024] Disabling unused clock "gpt11_ick"
[    0.219024] Disabling unused clock "uart1_ick"
[    0.219055] Disabling unused clock "uart2_ick"
[    0.219055] Disabling unused clock "usbtll_ick"
[    0.219085] Disabling unused clock "ssi_ssr_fck"
[    0.219085] Disabling unused clock "uart1_fck"
[    0.219116] Disabling unused clock "uart2_fck"
[    0.219116] Disabling unused clock "usbtll_fck"
[    0.219146] Disabling unused clock "ts_fck"
[    0.219177] Disabling unused clock "cpefuse_fck"
[    0.219177] Disabling unused clock "gpt11_fck"
[    0.219207] Disabling unused clock "gpt10_fck"
[    0.219207] Disabling unused clock "dpll4_m6x2_ck"
[    0.219238] Disabling unused clock "dpll4_m5x2_ck"
[    0.219268] Disabling unused clock "dpll3_m3x2_ck"
[    0.219268] Disabling unused clock "sys_clkout1"
[    0.219604] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.222198] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input3
[    0.222473] atmel_mxt: Atmel mXT Touchscreen v1.1 (0xc3d168) var:0xc bld:0xac
[    0.236114] panel-nokia-dsi display0: skipping HW reset
[    0.261627] panel-nokia-dsi display0: himalaya panel revision 38.95.8a
[    0.262512] regulator_init_complete: disabling rm680_vmmc1
[    0.264068] asoc: WL1273 BT/FM codec <-> omap-mcbsp-dai-2 mapping ok
[    0.265106] Waiting for root device /dev/mmcblk0p2...
[    0.706237] mmc0: new high speed MMC card at address 0001
[    0.706634] mmcblk0: mmc0:0001 HYNIX  14.8 GiB 
[    0.706939]  mmcblk0:mmc_queue_do_make_request process kmmcd (pid 15), read to sector 0, sectors 8
[    0.708404]  p1 p2 p3
[    0.848419] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    0.848510] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    0.848602] Freeing init memory: 152K
[    0.862609] Aegis: Invoking userspace helper
[    1.010955] Aegis: vhash code matched to validator-init
[    2.749053] Aegis: Creating new mount point hashlist ee7f8000
[    2.838470] Aegis: enabled (config data protection)
[    2.838531] Aegis: hashlist initialized preinit
[    4.894073] omap_device: smartreflex.0: new worst case activate latency 0: 152587
[    5.731964] hci_h4p hci_h4p: Registering HCI H4P device
[    5.753631] input: twl4030:vibrator as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_codec/input/input4
[    5.775390] CMT driver
[    5.779022] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input5
[    5.799255] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input6
[    5.826477] twl5031_aci twl5031_aci: found twl5031 ACI v.16
[    5.939392] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[    6.024230] Loading BCM4751 GPS driver
[    6.027435] wl1273_fm_module_init
[    6.035461] lis3lv02d: 8 bits sensor found
[    6.060150] OMAP SSI hw driver loaded
[    6.067993] i2c_omap i2c_omap.2: controller timed out
[    6.068267] lp5523 2-0032: LP5523 Programmable led chip found
[    6.080047] lp5523 2-0032: disabling engines
[    6.080291] Registered led device: lp5523:channel0
[    6.080474] Registered led device: lp5523:channel1
[    6.080657] Registered led device: lp5523:channel2
[    6.080841] Registered led device: lp5523:channel3
[    6.081024] Registered led device: lp5523:channel4
[    6.081207] Registered led device: lp5523:channel5
[    6.081512] Registered led device: lp5523:channel8
[    6.089508] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[    6.176544] SGX clock rate 195 MHz
[    6.336212] NET: Registered protocol family 35
[    6.339813] HSI/SSI char device loaded
[    6.346832] SSI protocol aka McSAAB added
[    6.384185] ssi_protocol ssi_protocol: WAKELINES TEST OK
[    6.395141] netlink: 5 bytes leftover after parsing attributes.
[    7.211334] mmc_queue_do_make_request process sfdisk (pid 380), read to sector 0, sectors 8
[    7.212799] g_file_storage gadget: File-backed Storage Gadget, version: 20 November 2008
[    7.212829] g_file_storage gadget: Number of LUNs=1 Number of buffers=16
[    7.435058] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode
[    7.699554] ramzswap: num_devices not specified. Using default: 1
[    7.699584] ramzswap: Creating 1 devices ...
[    7.731384] ramzswap: Disk size set to 262144 kB
[    7.740478] Adding 262136k swap on /dev/ramzswap0.  Priority:-1 extents:1 across:262136k SS
[    9.177001] omap mailbox rev 4.0
[    9.179779] DSP Bridge driver loaded
[    9.979431] init: xsession/mxt-configure post-start process (537) terminated with status 127
[   32.526855] wl1271: loaded
[   32.526885] wl1271: initialized
[   33.614501] Netfilter messages via NETLINK v0.30.
[   35.051483] omap-iommu omap-iommu.0: isp registered
[   35.188995] omap3isp omap3isp: Revision 15.0 found
[   35.189086] omap-iommu omap-iommu.0: isp: version 1.1
[   35.481750] smiapp 2-0037: firmware: requesting smiapp-sensor-10-4141-07.bin
[   35.601501] smia_reglist_import: meta_reglist version 0.0.46

gerbick | # 2738 | 2011-07-28, 04:22 | Report

Originally Posted by jalyst View Post

And why does everything have to be open anyway?

It doesn't. But once your fans, your marketing material and your community starts to tout how "open" you are, later to circle back and betray that notion, it makes it that much easier to poke fun at the hypocritical stance that the platform once had.

Pointing finger at Android saying it's not open, yet you're not open is like pointing fingers at a person for being a stoner while smoking medicinal marijuana yourself (hyperbole intended)

I want open software because it means that other entities could either fix it, workaround it, contribute to it after it's been dropped from popular support by a willing community, hacker, group or the curious.

Can't do that with closed software.

The Following 2 Users Say Thank You to For This Useful Post:
danramos, wmarone

daperl | # 2739 | 2011-07-28, 04:32 | Report

Woops, I missed the very beginning. I tried to remove some stuff that probably was nobody else's business.

Code:

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32.39-dfl61-20112201 (bifh5@) (gcc version 4.4.1 ('cs2009q3-hard-67-sb16') ) #1 PREEMPT Wed Jun 1 18:17:45 EEST 2011
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Nokia RM-680 board
[    0.000000] Reserving 14680064 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630 ES1.2-hs (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] On node 0 totalpages: 257024
[    0.000000] free_area_init_node: node 0, pgdat b05107fc, node_mem_map b054d000
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 254976 pages, LIFO batch:31
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 254976
[    0.000000] Kernel command line:  init=/sbin/preinit root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(swap),32768k@491520k(moslo) bootreason=pwr_key bootmode=normal nolo=2.0.37 product_name=RM-680 imei=xxxxxxxxxxxxxxx g_nokia.iSerialNumber=xxxxxxxxxxxxxxx serialnumber=xxxxxxxxx omap_sec.kci=916 battery-type=BL-4D gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,keypad_slide:109:key:inverted,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=xxx... product_model=N950 hwid=1124
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 5242880 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1002MB 2MB = 1004MB total
[    0.000000] Memory: 1008256KB available (4644K code, 464K data, 152K init, 0K highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
[    0.000000] Reprogramming SDRC clock to 390400000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000732] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[    0.039215] Security Framework initialized
[    0.039276] Aegis: init vhash=xxxx...
[    0.039428] Mount-cache hash table entries: 512
[    0.039794] Initializing cgroup subsys memory
[    0.039825] Initializing cgroup subsys freezer
[    0.039886] CPU: Testing write buffer coherency: ok
[    0.040405] devtmpfs: initialized
[    0.044799] regulator: core version 0.5
[    0.045013] NET: Registered protocol family 16
[    0.045806] RM-680 board, rev 1124
[    0.046722] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0118 -> 0x0000
[    0.046752] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0118 -> 0x0000
[    0.046783] SmartReflex class 1.5 driver: initialized
[    0.048675] OMAP DMA hardware revision 5.0
[    0.048797] Reserving DMA channels 0 and 1 for HS ROM code
[    0.051666] bio: create slab <bio-0> at 0
[    0.052124] regulator: vbat: 3700 mV 
[    0.052276] regulator: VEMMC: 2900 mV normal standby
[    0.053558] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2900 kHz
[    0.068481] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.068542] twl4030: power (irq 373) chaining IRQs 376..383
[    0.068969] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.069824] regulator: VUSB1V5: 1500 mV normal standby
[    0.070007] regulator: VUSB1V8: 1800 mV normal standby
[    0.070190] regulator: VUSB3V1: 3100 mV normal standby
[    0.072082] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.072845] regulator: VPLL1: 1800 mV normal standby
[    0.074249] regulator: VIO: 1800 mV normal standby
[    0.074493] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[    0.074768] regulator: VDAC: 1800 mV normal standby
[    0.075073] regulator: VAUX2: 1800 mV normal standby
[    0.075531] regulator: VINTANA1: 1500 mV normal standby
[    0.076019] regulator: VINTANA2: 2750 mV normal standby
[    0.076477] regulator: VINTDIG: 1500 mV normal standby
[    0.076690] regulator: VRRTC: 1500 mV normal standby
[    0.076965] regulator: VPLL2: 1800 mV normal standby
[    0.077270] regulator: VMMC2: 3000 mV normal standby
[    0.077575] regulator: VSIM: 1800 mV normal standby
[    0.077850] regulator: VAUX1: 2800 mV normal standby
[    0.078155] regulator: VAUX3: 2800 mV normal standby
[    0.078521] regulator: VAUX4: 2800 mV normal standby
[    0.078826] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[    0.086090] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
[    0.087341] Bluetooth: Core ver 2.15
[    0.087493] NET: Registered protocol family 31
[    0.087524] Bluetooth: HCI device and connection manager initialized
[    0.087554] Bluetooth: HCI socket layer initialized
[    0.087829] cfg80211: Calling CRDA to update world regulatory domain
[    0.088012] Switching to clocksource 32k_counter
[    0.088836] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
[    0.088958] HS USB OTG: revision 0x40, sysconfig 0x2015, sysstatus 0x1, intrfsel 0x1, simenable  0x0
[    0.089019] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.089019] musb_hdrc: MHDRC RTL version 1.800 
[    0.089050] musb_hdrc: 18/31 max ep, 14592/16384 memory
[    0.089080] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
[    0.089508] NET: Registered protocol family 2
[    0.089660] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.090057] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.093414] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.094818] TCP: Hash tables configured (established 131072 bind 65536)
[    0.094879] TCP reno registered
[    0.095031] NET: Registered protocol family 1
[    0.095611] dspbridge_init: 600000 bytes @ bea00000
[    0.095703] hs_init: omap_hs driver
[    0.096496] sec_init: omap_sec driver
[    0.106079] fuse init (API version 7.13)
[    0.106567] msgmni has been set to 1969
[    0.106842] Aegis: Netlink socket created
[    0.106903] restok: ready
[    0.106933] creds: ready
[    0.106964] credp: active
[    0.109558] io scheduler noop registered
[    0.109619] io scheduler anticipatory registered
[    0.109649] io scheduler deadline registered
[    0.110046] io scheduler cfq registered (default)
[    0.110534] OMAP DSS rev 2.0
[    0.110626] OMAP DISPC rev 3.0
[    0.110687] OMAP VENC rev 2
[    0.110931] OMAP DSI rev 1.0
[    0.119659] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.127258] serial8250.2: ttyS0 at MMIO 0x49020000 (irq = 74) is a TI16750
[    0.132476] brd: module loaded
[    0.135284] loop: module loaded
[    0.136810] OneNAND driver initializing
[    0.137054] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 104 MHz
[    0.137145] OneNAND Manufacturer: Samsung (0xec)
[    0.137145] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
[    0.137176] OneNAND version = 0x0232
[    0.137207] Chip support all block unlock
[    0.137207] Chip has 4KiB pagesize
[    0.137268] 6 cmdlinepart partitions found on MTD device omap2-onenand
[    0.137298] Creating 6 MTD partitions on "omap2-onenand":
[    0.137329] 0x000000000000-0x000000100000 : "bootloader"
[    0.137664] 0x000000100000-0x0000003c0000 : "config"
[    0.137939] 0x0000003c0000-0x0000013c0000 : "kernel"
[    0.138183] 0x0000013c0000-0x0000015c0000 : "log"
[    0.140502] mtdoops: Attached to MTD device 3
[    0.140533] 0x0000015c0000-0x00001e000000 : "swap"
[    0.140808] 0x00001e000000-0x000020000000 : "moslo"
[    0.141632] tun: Universal TUN/TAP device driver, 1.6
[    0.141662] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.143463] mtdoops: ready 0, 1
[    0.151275] input: ECI Accessory as /devices/virtual/input/input0
[    0.151611] i2c /dev entries driver
[    0.152099] Linux media interface: v0.10
[    0.152191] Linux video capture interface: v2.00
[    0.153503] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    0.154296] HACK: TWL5031 WDT can't be disabled. Automatic WDT refresh started
[    0.154418] cpuidle: using governor ladder
[    0.154418] cpuidle: using governor menu
[    0.154968] omap_sham_mod_init: loading omap-sham driver
[    0.155090] omap-sham omap-sham: hw accel on OMAP rev 0.9
[    0.156280] Advanced Linux Sound Architecture Driver Version 1.0.21.
[    0.158782] No device for DAI omap-mcbsp-dai-0
[    0.158813] No device for DAI omap-mcbsp-dai-1
[    0.158843] No device for DAI omap-mcbsp-dai-2
[    0.158874] No device for DAI omap-mcbsp-dai-3
[    0.158905] No device for DAI omap-mcbsp-dai-4
[    0.213958] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[    0.216552] input: dfl61-twl4030 Jack as /devices/platform/soc-audio.0/sound/card0/input1
[    0.217773] DFL61 TWL SoC init done (config 4)
[    0.218444] asoc: tlv320dac33 <-> omap-mcbsp-dai-1 mapping ok
[    0.219329] ALSA device list:
[    0.219360]   #0: dfl61-twl4030 (twl4030)
[    0.219390]   #1: dfl61-dac33 (tlv320dac33)
[    0.219909] misc iphb: Module registered in 2.6.32.39-dfl61-20112201, built Jun  1 2011 18:17:35
[    0.220001] TCP cubic registered
[    0.220031] NET: Registered protocol family 17
[    0.220092] NET: Registered protocol family 15
[    0.220153] Bluetooth: L2CAP ver 2.14
[    0.220184] Bluetooth: L2CAP socket layer initialized
[    0.220214] Bluetooth: SCO (Voice Link) ver 0.6
[    0.220245] Bluetooth: SCO socket layer initialized
[    0.220489] Bluetooth: RFCOMM TTY layer initialized
[    0.220520] Bluetooth: RFCOMM socket layer initialized
[    0.220550] Bluetooth: RFCOMM ver 1.11
[    0.220581] Power Management for TI OMAP3.
[    0.222717] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input2
[    0.222930] atmel_mxt: Atmel mXT Touchscreen v1.1 (0xc3d168) var:0xc bld:0xac
[    0.223602] SmartReflex device[1] initialized
[    0.223693] SmartReflex device[2] initialized
[    0.224639] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[    0.229125] Disabling unused clock "gpt2_ick"
[    0.229156] Disabling unused clock "gpt3_ick"
[    0.229156] Disabling unused clock "gpt4_ick"
[    0.229187] Disabling unused clock "gpt5_ick"
[    0.229187] Disabling unused clock "gpt6_ick"
[    0.229217] Disabling unused clock "gpt7_ick"
[    0.229217] Disabling unused clock "gpt8_ick"
[    0.229248] Disabling unused clock "gpt9_ick"
[    0.229248] Disabling unused clock "gpio2_dbck"
[    0.229278] Disabling unused clock "gpio3_dbck"
[    0.229278] Disabling unused clock "gpio4_dbck"
[    0.229309] Disabling unused clock "gpio5_dbck"
[    0.229309] Disabling unused clock "gpio6_dbck"
[    0.229339] Disabling unused clock "gpt9_fck"
[    0.229339] Disabling unused clock "gpt8_fck"
[    0.229370] Disabling unused clock "gpt7_fck"
[    0.229370] Disabling unused clock "gpt6_fck"
[    0.229400] Disabling unused clock "gpt5_fck"
[    0.229400] Disabling unused clock "gpt4_fck"
[    0.229400] Disabling unused clock "gpt3_fck"
[    0.229431] Disabling unused clock "gpt2_fck"
[    0.229461] Disabling unused clock "gpio1_dbck"
[    0.229461] Disabling unused clock "rng_ick"
[    0.229492] Disabling unused clock "ssi_ick"
[    0.229492] Disabling unused clock "gpt10_ick"
[    0.229522] Disabling unused clock "gpt11_ick"
[    0.229522] Disabling unused clock "uart1_ick"
[    0.229553] Disabling unused clock "uart2_ick"
[    0.229553] Disabling unused clock "usbtll_ick"
[    0.229583] Disabling unused clock "ssi_ssr_fck"
[    0.229614] Disabling unused clock "uart1_fck"
[    0.229614] Disabling unused clock "uart2_fck"
[    0.229644] Disabling unused clock "usbtll_fck"
[    0.229675] Disabling unused clock "ts_fck"
[    0.229675] Disabling unused clock "cpefuse_fck"
[    0.229705] Disabling unused clock "gpt11_fck"
[    0.229705] Disabling unused clock "gpt10_fck"
[    0.229736] Disabling unused clock "dpll4_m6x2_ck"
[    0.229736] Disabling unused clock "dpll4_m5x2_ck"
[    0.229766] Disabling unused clock "dpll3_m3x2_ck"
[    0.229766] Disabling unused clock "sys_clkout1"
[    0.230133] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.246429] panel-nokia-dsi display0: skipping HW reset
[    0.276214] panel-nokia-dsi display0: himalaya panel revision 38.95.8a
[    0.277099] regulator_init_complete: disabling rm680_vmmc1
[    0.278656] asoc: WL1273 BT/FM codec <-> omap-mcbsp-dai-2 mapping ok
[    0.279693] Waiting for root device /dev/mmcblk0p2...
[    0.720947] mmc0: new high speed MMC card at address 0001

jalyst | # 2740 | 2011-07-28, 04:41 | Report

Originally Posted by gerbick View Post

How was the notion betrayed from Maemo --> MeeGo?
It's still basically the same as far I've seen so far...

Originally Posted by

Base and Middle-ware's still basically just as open/closed.
UI's a bit more closed than Maemo, but it's not as though Maemo's UI was ever a 'beacon of openness'.
Plus if you'd made any attempt at following developments in the MeeGo community.
You'd know that the closed UI's somewhat of a misnomer, based on developments actually occurring wrt that.
But I'll let you read-up to understand what I'm talking about there.

Originally Posted by

Pointing finger at Android saying it's not open, yet you're not open is like pointing fingers at a person for being a stoner while smoking medicinal marijuana yourself (hyperbole intended)

Are you trying suggest Android is as open as Maemo/MeeGo?
Not that it's as huge a point for me, as it seemingly is for you.

Last edited by jalyst; 2011-07-28 at 04:46.

Page 274 of 1048 | Prev | 264 272 273 274 275 276 284 | Next | Last