[Announce] kernel-power stable v49 in Extras-Testing - Page 139 - maemo.org

trisha02 | # 1381 | 2011-08-29, 13:18 | Report

it dint show up.bdw i used power search.what if i dont get the answer?if the problem arised after installing K48.i will obviously report it here right?

karam | # 1382 | 2011-08-29, 13:18 | Report

Originally Posted by Gusse View Post

I can see segmentation fault with Leafpad, but only in sudo gainroot mode.
1) sudo gainroot -> leafpad -> save as -> segmentation fault
2) root -> leafpad -> save as -> OK

when you run sudo gainroot
do this :

Code:

run-stand-alone.sh leafpad

toxaris | # 1383 | 2011-08-29, 13:24 | Report

Just some confirms:
Updated from KP47 to KP48 with HAM. No unexpected problems sofar.
JoikuSpot works if you you apply the old boucerfix.
Nokia BH-214 still doesnt work as expected.
H-E-N works (I think I run BME or atleast default)
Fcamera works.

Edit:
Got the leafpad "Save as"-problem.

Last edited by toxaris; 2011-08-29 at 13:32.

The Following User Says Thank You to toxaris For This Useful Post:
Estel

toxaris | # 1384 | 2011-08-29, 13:32 | Report

Originally Posted by Gusse View Post

I can see segmentation fault with Leafpad, but only in sudo gainroot mode.
1) sudo gainroot -> leafpad -> save as -> segmentation fault
2) root -> leafpad -> save as -> OK

Hmm, some here.
In x-term:
root
cd /home/user
leafpad test.txt
(saved the file with some text and exit)
leafpad test.txt
Now I do a "Save as" and 5 seconds later the phone reboots.

Strange.

The Following User Says Thank You to toxaris For This Useful Post:
Estel

mooglez | # 1385 | 2011-08-29, 13:32 | Report

Originally Posted by karam View Post

when you run sudo gainroot
do this :

Code:

run-stand-alone.sh leafpad

run-standalone.sh leafpad, i think you meant.

and running leafpad like that does not crash it when trying to use the save as (atleast for me on pk46)

The Following User Says Thank You to mooglez For This Useful Post:
Estel

reinob | # 1386 | 2011-08-29, 13:32 | Report

Arghh.. I hate it when I say something and do the opposite.. but WTF, at least it's more or less on topic..

Originally Posted by trisha02 View Post

it dint show up.bdw i used power search.what if i dont get the answer?if the problem arised after installing K48.i will obviously report it here right?

That's true in principle

But if you had looked at the first post (probably you have, just overlooked it

you would have noticed the "disabled autoloading bq27x00_battery module".

As far as I know using that module is the only means of getting the battery temperature (I'm sure there's also at least one thread about qcpufreq in this forum, I will leave the proof as an excercise to the reader

, so if you don't load that module, so you don't get the temperature.

Now, if it the module is not loaded ("didn't show up") then you need to enable it:

First make sure it is NOT blacklisted. Look in /etc/modprobe.d/blacklist
Then, to be on the safe side, just load it by hand "# modprobe bq27x00_battery" (please report any errors you get).

If all OK, check with the qcpufreq thing and see what you get.

toxaris | # 1387 | 2011-08-29, 13:35 | Report

Originally Posted by mooglez View Post

run-standalone.sh leafpad, i think you meant.

and running leafpad like that does not crash it when trying to use the save as (atleast for me on pk46)

Naa, not for me.
If I run it Standalone I get the savedialog but a few seconds later the phone crash.

Last edited by toxaris; 2011-08-29 at 13:39.

The Following 2 Users Say Thank You to toxaris For This Useful Post:
deegore, Estel

woody14619 | # 1388 | 2011-08-29, 18:08 | Report

I'm willing to bet this has something to do with something plugging into system in an odd way, or a bad parameter being passed into a kernel level call by a library. I don't have my device setup for debugging, but if someone who can get the SaveAs dialog to work in v48 could do an strace and find out what calls are being done, I'd bet good money something's calling in to the same system call in v48 (probably something around getting mount points) with a sometimes bad parameter.

User-based apps shouldn't be able to crash a system this readily. There's got to be something happening at a kernel/system level to cause this quick of a reboot on multiple people's systems.

The Following 2 Users Say Thank You to woody14619 For This Useful Post:
Estel, reinob

arnoldux | # 1389 | 2011-08-29, 18:45 | Report

cant see the temp using desktop execution command widget, works fine in qcpu
any ideas?

sorry if smeone already said it, cant read all the 10000000 posts and didnt get answer using search or at least didnt see it
cheers

demiurgo0 | # 1390 | 2011-08-29, 19:55 | Report

how I can regain the kernel V47?

kernel-48 battery discharge so fast I