youday4u | # 91 | 2011-04-13, 10:47 | Report

i dont use sd card and i havnt overclocked .if i switch off and on it will work fine.

i am fed up of this.not sure what is the cause..

youday4u | # 92 | 2011-04-14, 06:23 | Report

guys is there any way to fix my n900 ??

Bartcore3 | # 93 | 2011-04-15, 09:15 | Report

i realy loved the messages while waiting
did you make this program?

youday4u | # 94 | 2011-04-16, 16:20 | Report

guys help me ASAP

got all the problems again.what to do ?

Cloudpunisher | # 95 | 2011-05-06, 02:42 | Report

try this

You can use Microsoft Virtual PC - Also known as XP Mode. Professional, Enterprise, and Ultimate editions of Windows 7 come with Windows XP mode, but must be downloaded and installed before use.
1. Connect your N900 in flasher mode; Hold u on the device keyboard, then connect the USB cable.
2. Wait for Windows to install the appropriate drivers.
3. Start Microsoft Virtual PC / Windows XP mode/
4. Allow the Virtual PC to have access to your N900: (On the top bar): USB > Nokia N900 (Update mode) (Attach). (If it doesn't say (update mode), you didn't enter update mode correctly by pressing "u". Remove the cable and try again.)
5. Wait for Windows to install the appropriate drivers.
6. When it is finished, proceed with the normal flashing steps above.

There have been numerous reports on the forums of people trying to flash the rootfs/FIASCO and eMMC with Windows 7 64 bit XP Mode/Virtual PC, where the rootfs/FIASCO image flashed just fine, but the eMMC image stays at "no suitable device found. Waiting". Again allow the Virtual PC to have access to your N900: (On the top bar): USB > Nokia N900 but *NOTICE* now it will be Nokia N900 (PC-Suite mode) (Attach). Now the flashing will start normally.

vivmak | # 96 | 2011-05-11, 21:29 | Report

I got Nokia 900 (Storage Mode) , is it still going to work?

cdoebbler | # 97 | 2011-05-22, 16:53 | Report

How do you "Run inf-wizard.exe (bin folder in zip) - Run as Administrator"i file is not found on my computer even after unpacking libusb-win32-bin-1.2.2.0.zip?

kl2010 | # 98 | 2011-05-29, 00:41 | Report

i can confirm this works like a charm. for those still having problems of ...waiting.

1. first check to see where the flasher-3.5 is installed.
2. if it is in a folder like C:\Program Files (x86), then unistall it
3. reinstall it back on C:\Program Files. NOTICE THE FOLDER. BE SURE YOU CHANGE IT TO C:\Program Files during the reinstallation.
4 then follow the steps as outlined by earlier by codetracer.


should work like a charm. cheers.

GaRy delaMEr | # 99 | 2011-08-31, 23:09 | Report

Hi all

I confirm too, work like a charm:

Run: cmd.exe and then,
Windows 7 64 Ultimate Edition

zylor | # 100 | 2011-09-11, 16:57 | Report

Worked like a charm!