Page 2 of 2 1 2
Reply
Thread Tools
bs_aggarwal is offline bs_aggarwal
2011-09-09 , 20:14
Posts: 11 | Thanked: 0 times | Joined on Aug 2011
#11
hi friends..any suggestion to get the issue fixed?
 
Estel's Avatar
Estel is offline Estel
2011-09-09 , 20:33
Posts: 5,028 | Thanked: 8,614 times | Joined on Mar 2011
#12
Seriously would like to help You, but I have no idea what may be causing this. It seems very strange for a hardware failure, but who knows...

The most strange part is that You can boot up device using normal mode, but R&D fail... I've never heard of something like that.

Could You please search forum for "framebuffer kernel" and try it, especially in R&D mode? We could check what it's complaining about (You'll see framebuffer output, instead of 5 dots).
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 
tuxsavvy is offline tuxsavvy
2011-09-10 , 09:54
Posts: 502 | Thanked: 366 times | Joined on Jun 2010 @ /dev/null
#13
Originally Posted by bs_aggarwal View Post
2. though the device doesnot enter R&D mode but it boots up fine in production mode..


yes.i have sucessfully flashed it..
I used win7 OS( i know people reported some issue with win7 but it worked fine for me)..
i used below images..
RX-51_2009SE_10.2010.19-1.004_PR_COMBINED_004_ARM
RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.
I am at the stage where i dont even know if this is a battery problem. Hw problem or software problem..
please advise if i can somehow figuure out what is the problem??
RX-51_2009SE_10.2010.19-1.004_PR_COMBINED_004_ARM == old: Fourth Maemo 5 India release for Nokia N900.
RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM
== ok: Latest Vanilla version of the eMMC content for Nokia N900
NOTE: Always flash the eMMC image first, then the FIASCO image immediately after that. Never boot up the device between flashing the FIASCO image and the eMMC image! When flashing eMMC always also flash FIASCO rootfs - NEVER boot the device between the two flashes.

You should be using:
RX-51_2009SE_10.2010.36-2.004_PR_COMBINED_004_ARM
which is: Latest Maemo 5 India release for Nokia N900
__________________
 

The Following User Says Thank You to tuxsavvy For This Useful Post:
bs_aggarwal is offline bs_aggarwal
2011-09-10 , 12:40
Posts: 11 | Thanked: 0 times | Joined on Aug 2011
#14
hi Estel

thanks for the support.

i tried searching but could not find specific way to download and install "framebuffer kernel"..
I am a techie guy but have not worked much on phones..so can u please point me to the link to install framebuffer kernel.

thanks again
 
bs_aggarwal is offline bs_aggarwal
2011-09-10 , 12:56
Posts: 11 | Thanked: 0 times | Joined on Aug 2011
#15
hi Tuxsavy

i tried with the latest maemo also but stil the result are same..

Originally Posted by tuxsavvy View Post
RX-51_2009SE_10.2010.19-1.004_PR_COMBINED_004_ARM == old: Fourth Maemo 5 India release for Nokia N900.
RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM
== ok: Latest Vanilla version of the eMMC content for Nokia N900
NOTE: Always flash the eMMC image first, then the FIASCO image immediately after that. Never boot up the device between flashing the FIASCO image and the eMMC image! When flashing eMMC always also flash FIASCO rootfs - NEVER boot the device between the two flashes.

You should be using:
RX-51_2009SE_10.2010.36-2.004_PR_COMBINED_004_ARM
which is: Latest Maemo 5 India release for Nokia N900
 
Estel's Avatar
Estel is offline Estel
2011-09-10 , 17:41
Posts: 5,028 | Thanked: 8,614 times | Joined on Mar 2011
#16
I think You should be using this package:

http://maemo.org/packages/view/kernel-framebuffer/
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 17:30.

Contact Us - Home - Archive - Top