ok

it's very simple

but u should know that u need also to flash the latest firmware pr 1.3 after flashing the custom emmc

now u should have these 3 files ;

1 - flasher 3.5 program from here
http://www.mediafire.com/?7a67rbg8x27etd6

2 - custom 8 giga emmc from here
http://www.mediafire.com/?5o1hkuuwhn8hh1c

3 - latest firmware pr 1.3 from here
http://tablets-dev.nokia.com/nokia_N900.php


after that

u need to install flasher program as usual on ur computer ( remember that u need to have win xp or vista or 7 32 bit not 64 bit )


after installation , copy custom emmc file and firmware file to this path on ur computer

C:\Program Files\maemo\flasher-3.5


now we have to flash the mobile and it's very simple


follow my instructions and don't change anything

1 - press on start button then all programs then maemo then maemo flasher 3.5 and press on it and u will see dos page

2 - make sure that ur mobile is disconnected from computer and closed

3 - write the following in the dos page :


Code:
flasher-3.5.exe -F EMMC_By.MiDO.FaYad.8.giga.bin -fu will see usb device not found , waiting on the dos page

after that , close ur mobile and press on p button and connect the usb cable while u still press on p then u will see that computer began to see ur mobile and flahing it


4 - after it finish , discoonect ur mobile from computer and remove the battery and insert it again and write this command in dos page to flash the firmware


Code:
flasher-3.5.exe -F xxxx -f -Rand replace xxxx bu ur firmware pr 1.3 name

and press on p and connect the cable while u still press on p and wait untill ur mobile opened