[SOLVED]N900 boot loop on Hildon Desktop

Member's Online

Page 2 of 2 | Prev | 1 2 |

cfh11 | # 11 | 2010-12-28, 18:22 | Report

If you can get into theme customizer without a crash, you might also try the restore defaults option.

The Following User Says Thank You to cfh11 For This Useful Post:
RiD

RiD | # 12 | 2010-12-28, 18:30 | Report

Indeed, Snap to Grid was really the failure. I thought that 0 would work because I thought i've set to 0 once, but no, it was 1.

Thanks for all your help guys, it's already fixed (managed to do it via xterm, i had a backup of the transitions file)

Moral of the story: Don't be stupid like me

Will disable R&D mode now.

tolga | # 13 | 2011-01-06, 20:33 | Report

Originally Posted by MohammadAG View Post

Use R&D mode and set the RD flag no-lifeguard-reset
Basically:

Code:

flasher-3.5 --enable-rd-mode --set-rd-flags=no-lifeguard-reset

This should kill the watchdog, and you should be able to boot up fine and reverse the changes.

Thanks for your help.
I managed to get out of the mess I have and managed to back up everthing...

slider5 | # 14 | 2011-12-16, 20:15 | Report

Originally Posted by RiD View Post

*ALREADY FIXED*
Never set snap to grid to 0 in transitions.ini, either with Theme Customizer or any other way
If you do, you'll find yourself into a big headache

I did the same mistake.

The problem is that I have no more USB port
to flash the device.
So my phone restart again and again.

Is there a way to solve this difficult situation...?

Page 2 of 2 | Prev | 1 2 |