Reply
Thread Tools
Posts: 28 | Thanked: 3 times | Joined on Dec 2011
#41
Originally Posted by Hurrian View Post
If you don't know about ext4 /home partition, then you didn't do it

At this point in time, since the dots mean that kernel is able to boot, and Xomap is probably started, we'd probably want to get some dmesg logs.
.
Oh yes, it'd be great to see some logs. Any idea on how to access them?
 
Estel's Avatar
Posts: 5,028 | Thanked: 8,614 times | Joined on Mar 2011
#42
When you've enabled R&D mode, have you also prompt flasher to disable watchdogs? Just enabling R&D may be not enough.

/Estel
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 
Posts: 11 | Thanked: 0 times | Joined on May 2010
#43
Motherboard replacement ... this happened to me. can not be repaired : (
the "noname" chargers isn't good this device (sorry for my english...)
 
Estel's Avatar
Posts: 5,028 | Thanked: 8,614 times | Joined on Mar 2011
#44
Maybe, but first, it would be great to test every possible way of restoring it. Especially, that most parts seem to work.
__________________
N900's aluminum backcover / body replacement
-
N900's HDMI-Out
-
Camera cover MOD
-
Measure battery's real capacity on-device
-
TrueCrypt 7.1 | ereswap | bnf
-
Hardware's mods research is costly. To support my work, please consider donating. Thank You!
 

The Following User Says Thank You to Estel For This Useful Post:
Posts: 11 | Thanked: 0 times | Joined on May 2010
#45
I sent my phone to the Nokia service, and they sad in the motherboard important power circuit is injured. So, only motherboard replacement solve this problem.
 
Posts: 11 | Thanked: 0 times | Joined on May 2010
#46
i love this phone, but i think this motherboard isn't worth 170 USD...so my dead n900 is "paperweight
 
Posts: 1,225 | Thanked: 1,905 times | Joined on Feb 2011 @ Quezon City, Philippines
#47
Originally Posted by Szelley View Post
i love this phone, but i think this motherboard isn't worth 170 USD...so my dead n900 is "paperweight
Considering the price of a brand new Overo Fire + a GSM dongle, I think that $170 is a fair price (if it isn't, a 2nd-hand N900 is worth $170)

Anyways, back to the thread.
Apparently, you need to install a logger for logging facilities to work. But don't fret. Get a SD card and install Nemo Mobile on it
(and use these RD flags:
flasher-3.5 --enable-rd-mode --set-rd-flags=no-lifeguard-reset --set-rd-flags=no-omap-wd --set-rd-flags=no-ext-wd
)
__________________
N9 PR 1.3 Open Mode + kernel-plus for Harmattan
@kenweknot, working on Glacier for Nemo.
 
Posts: 3,058 | Thanked: 12,894 times | Joined on Mar 2010 @ Sofia,Bulgaria
#48
Guys, from the sympthoms so far it seems that:

1. HW is pretty OK, otherwise I don't think we will have a booting kernel.
2. rootfs is flashed OK (we won't have flying dots otherwise)
3. eMMC is either HW broken or filesystem broken/totally empty. I would bet on the second.

@giff53, forget about my idea installing Nemo on SD card, there is an easier way. I think up to (and including) PR1.1 the MyDocs(eMMC) was visible from PC when phone is switched off and USB connected. So you may try to flash an older firmware to see if you can see it. If you are unable then it does not make sence to continue try restoring MyDocs, there is nothing left, so just flash eMMC and hope the HW is OK.
 

The Following User Says Thank You to freemangordon For This Useful Post:
Posts: 28 | Thanked: 3 times | Joined on Dec 2011
#49
Originally Posted by Szelley View Post
Motherboard replacement ... this happened to me. can not be repaired : (
the "noname" chargers isn't good this device (sorry for my english...)
Hi there. Yes, it could be, but my case need not necessarily be like yours, so I'll keep hoping a bit
 
Posts: 28 | Thanked: 3 times | Joined on Dec 2011
#50
Originally Posted by Estel View Post
When you've enabled R&D mode, have you also prompt flasher to disable watchdogs? Just enabling R&D may be not enough.

/Estel
Yes I did. But the RD mode also loops, only now I see the screen properly lit, with some info about the phone, like the hw revision...
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 06:02.