lol....load the driver first then enable the monitor mode....
after using it then go back to configure WLAN Driver & unload the driver (monitor mode will be automatic disable) before you exit Cleven...
AFAIK, power kernel has injection drivers already included; is there really a need to load and unload the drivers?
Signal power is good idea, but wouldn't the signal quality (!= power) be more useful? You can easily collect IVs from low-power, high-quality AP, or You can got problems with -50 dB AP; if, by some reasons, it's signal is of constantly bad quality.
Of course, no reason to not include both - there are plenty of space in detected APs list
---
Saturn, can I grill You again for not including broadcast deauthentication in WEP mode? Man, in new layout, there is plenty of space available for 4th button
Signal power is good idea, but wouldn't the signal quality (!= power) be more useful? You can easily collect IVs from low-power, high-quality AP, or You can got problems with -50 dB AP; if, by some reasons, it's signal is of constantly bad quality.
Of course, no reason to not include both - there are plenty of space in detected APs list
---
Saturn, can I grill You again for not including broadcast deauthentication in WEP mode? Man, in new layout, there is plenty of space available for 4th button
If we're grilling, could we also get -p0841 attack mode? Fragmentation and chop-chop seem to work poorly on N900 (around 10-30 IVS per second) and require active clients like arp replay. p0841 gets to >200 like arp replay and works quite often with no clients around.
I was thinking also to sort them by power instead on name..
Anyways, don't trust that much this measurement; the data are from only a few seconds. I would use more an extra program like the wifieye to determine the surrounding.
Signal power is good idea, but wouldn't the signal quality (!= power) be more useful? You can easily collect IVs from low-power, high-quality AP, or You can got problems with -50 dB AP; if, by some reasons, it's signal is of constantly bad quality.
It depends on the work done on the driver side. There are some serious guys which have added quadratic models but in most cases the conversion is done with a linear model.
