Saturn | # 381 | 2012-01-14, 12:08 | Report

Read from here steps 2 and 4. My effort was to automate (as much as possible) those steps.

In short you need to capture the 4-way authentication handshake for the AP. This is stored in the .cap file and you test it against a wordlist (aka dictionary). So you need to choose both before the decrypt button becomes active.

kosmi1 | # 382 | 2012-01-14, 20:07 | Report

ok i just get the point.. thnx a lot

g0r | # 383 | 2012-01-14, 22:57 | Report

@Saturn
just came across this do you think that is the problem I have with aps with spaces posted here ???

---

Last edited by g0r; 2012-01-14 at 23:10.

Estel | # 384 | 2012-01-14, 23:22 | Report

Saturn, any chances of adding support for interactive injection, as per:
http://talk.maemo.org/showpost.php?p...&postcount=639
...implemented in:
http://talk.maemo.org/showpost.php?p...postcount=1127
...?

/Estel

Saturn | # 385 | 2012-01-15, 12:25 | Report

(Sorry, I've never answered this, but I saw it again in the faircrack thread. It was more simple to find your post here..)

The bleeding edge drivers are not (yet) included in KP.

I suspect you have added a call to the load.sh in the boot sequence or added the drivers in the libs folder and then forgot about it..

Could it be the case?

StefanL | # 386 | 2012-01-15, 12:35 | Report

Been doing some more research into this and still have not got a conclusive answer . Been looking into this for over a year now. My latest test confirm injection by aircrack-ng, but test for the injection driver shows stock drivers. I am sure injection has been working as part of my development on fAircrack (shameless plug ), so I am looking for some wisdom from the almighty Maemo Guru's to put my mind at ease. I think I am going to give in and just do what everybody else is doing and actually load and unload the drivers.

---

Last edited by StefanL; 2012-01-15 at 12:43.

Saturn | # 387 | 2012-01-15, 12:42 | Report

I have answered this a few times. Last time was here
Haven't really understood why you linked those posts from the faircrack thread.

Saturn | # 388 | 2012-01-15, 12:54 | Report

In the screenshot you have there what was the command that gave you the interface info?

If you notice carefully there is an error. A script was executed and a sleep command was requested with 1s option.

I guess this script loads the drivers for you..

StefanL | # 389 | 2012-01-15, 12:59 | Report

Saturn | # 390 | 2012-01-15, 13:28 | Report

Could you do
and attach/post here the airmon-ng.txt file you will find in your MyDocsfolder?

That could be it..