Download Manager For Nokia N900 - Page 3 - maemo.org

seanmcken | # 21 | 2012-03-07, 10:15 | Report

but we still need a good downloader. no need of battery consuption matter

seanmcken | # 22 | 2012-03-07, 11:02 | Report

how to use it plz write down whole stuff

eight | # 23 | 2012-03-07, 11:07 | Report

-- first rtfm http://pyload.org/en:wiki

------------------

- download the deb http://get.pyload.org/get/ubuntu-cli/

- open terminal and type:

Code:

dpkg -i pyload-cli-v0.4.9-all.deb

It will blame about some unmet depencies, just run

Code:

apt-get -f install

and the needed packages get installed
then run again

Code:

dpkg -i pyload-cli-v0.4.9-all.deb

and install pyload.

- start pyLoad with

Code:

pyLoadCore

- after first launch configuration in the terminal must be completed

- then restart pyLoadCore and fire up your Web-Browser
- connect to

Code:

localhost:8000

or

Code:

127.0.0.1:8000

----------------------------------------
Some screens:

Last edited by eight; 2012-03-07 at 11:15.

The Following User Says Thank You to eight For This Useful Post:
Joseph9560

seanmcken | # 24 | 2012-03-07, 11:22 | Report

dude look at this

home/user/MyDocs # pyLoadCore
This is your first start, running configuration assistent now.
Choose your Language / Wähle deine Sprache ([en], de, fr, it, es, nl, sv, ru, pl, cs, sr, pt_BR): en

Welcome to the pyLoad Configuration Assistent.
It will check your system and make a basic setup in order to run pyLoad.

The value in brackets [] always is the default value,
in case you don't want to change it or you are unsure what to choose, just hit enter.
Don't forget: You can always rerun this assistent with --setup or -s parameter, when you start pyLoadCore.
If you have any problems with this assistent hit STRG-C,
to abort and don't let him start with pyLoadCore automatically anymore.

When you are ready for system check, hit enter.

## System Check ##
Python Version: OK
pycurl: OK
sqlite3: OK

pycrypto: OK
py-OpenSSL: missing

py-imaging: missing
tesseract: missing

PyQt4: OK

jinja2: OK
beaker: OK
JS engine: missing

System check finished, hit enter to see your status report.

## Status ##

Features available: container decrypting, GUI, Webinterface

Featues missing:

no SSL available
This is needed if you want to establish a secure connection to core or webinterface.
If you only want to access locally to pyLoad ssl is not usefull.

no Captcha Recognition available
Only needed for some hosters and as freeuser.

no JavaScript engine found
You will need this for some Click'N'Load links. Install Spidermonkey, ossp-js, pyv8 or rhino
You can abort the setup now and fix some dependicies if you want.
Continue with setup? ([y]/n): Y

Do you want to change the config path? Current is /home/user/MyDocs
If you use pyLoad on a server or the home partition lives on an iternal flash it may be a good idea to change it.
Change config path? (y/[n]): y
Setting new configpath, current configuration will not be transfered!
Configpath [/home/user/MyDocs]:
Configpath changed, setup will now close, please restart to go on.
Press Enter to exit.

eight | # 25 | 2012-03-07, 11:32 | Report

Change the config path to

Code:

/home/user/.pyload

and change the download location to

Code:

/home/user/MyDocs/Downloads

(create the folder)
or to SDcard

Code:

/media/mmc1/Downloads

.

Last edited by eight; 2012-03-07 at 11:35.

The Following User Says Thank You to eight For This Useful Post:
seanmcken

seanmcken | # 26 | 2012-03-07, 11:49 | Report

/home/user # /home/user/ .pyload
/bin/sh: /home/user/: Permission denied
/home/user # /home/user/.pyload
/bin/sh: /home/user/.pyload: Permission denied
/home/user #

seanmcken | # 27 | 2012-03-07, 12:17 | Report

`less' or `more' !
Nokia-N900:~# apt-get remove
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Nokia-N900:~# apt-get remove pyload
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting pyload-cli instead of pyload
The following packages were automatically installed and are no longer required:
python-crypto python-pycurl libgmp3c2
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
pyload-cli
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
After this operation, 5448kB disk space will be freed.
Do you want to continue [Y/n]? Y
(Reading database ... 29007 files and directories currently installed.)
Removing pyload-cli ...
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/thrift/server' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/thrift/protocol' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/thrift/transport' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/thrift' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/beaker/ext' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/beaker/crypto' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/beaker' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/simplejson' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/jinja2/_markupsafe' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib/jinja2' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/lib' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/common' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/network' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/web' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/database' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/remote/thriftbackend/thriftgen/pyload' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/remote/thriftbackend/thriftgen' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/remote/thriftbackend' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/remote' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/config' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/plugins/hooks' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/plugins/internal' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module/plugins' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/module' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload/scripts' not empty so not removed.
dpkg - warning: while removing pyload-cli, directory `/usr/share/pyload' not empty so not remo

seanmcken | # 28 | 2012-03-07, 12:25 | Report

ohh my god im sorry. plz tell how to change location

seanmcken | # 29 | 2012-03-07, 13:45 | Report

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ sudo gainroot
Root shell enabled

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/home/user # pyLoadCore
07.03.2012 19:01:56 INFO Starting pyLoad 0.4.9
07.03.2012 19:01:56 INFO Using home directory: /home/user/.pyload
07.03.2012 19:01:59 INFO ExtractArchive: Activated UnRar
07.03.2012 19:01:59 INFO Activated plugins: CaptchaTrader, ClickAndLoad, ExternalScripts, ExtractArchive, LinkdecrypterCom, UpdateManager
07.03.2012 19:01:59 INFO Deactivate plugins: EasybytezCom, Ev0InFetcher, HotFolder, IRCInterface, MergeFiles, MultiHome, MultishareCz, Premium4Me, RealdebridCom, RehostTo, XMPPInterface
07.03.2012 19:02:00 INFO Downloadtime: True
07.03.2012 19:02:00 INFO Starting ThriftBackend: 0.0.0.0:7227
07.03.2012 19:02:00 INFO Free space: 6.55 GiB
07.03.2012 19:02:00 INFO Activating Accounts...
07.03.2012 19:02:00 INFO Activating Plugins...
07.03.2012 19:02:01 INFO Starting builtin webserver: 0.0.0.0:8001
07.03.2012 19:02:16 INFO pyLoad is up and running
07.03.2012 19:02:19 INFO No Updates for pyLoad
07.03.2012 19:02:21 INFO No plugin updates available

not getting to web browser. plzzzzz helppppp

seanmcken | # 30 | 2012-03-07, 14:51 | Report

finally i managed to use