nicholes | # 21 | 2012-02-29, 17:03 | Report

yes it show IMEI when i dial *#06#

Estel | # 22 | 2012-02-29, 18:41 | Report

Sounds like hardware failure of cellular modem. I doubt that "specialists" who offered You to get rid of simlock would achieve anything. I'm quite sure, that after messing some things up, they would say "hardware damage".

/Estel

spajta111 | # 23 | 2012-03-01, 06:23 | Report

eny advice what should i do ?

hentaisama | # 24 | 2012-03-05, 23:52 | Report

I have the same problem.
I bought a n900 from mercadolibre (ebay-like) seller. It just pick one operator, movistar was blocked. I guess is was concerning about soft ware or something like that. Ive flashed and reflashed and couldn't get anything.

The phone really was blocked by movistar operator because of it was reported as stolen.

Now im reading this topic i dont know if flashing with indian or american fw can be unlocked or get something.

i will try.

spajta111 | # 25 | 2012-03-07, 06:19 | Report

i bought my phone same way as you did.

Hurrian | # 26 | 2012-03-07, 07:05 | Report

This means that your phone is NOT communicating with the cell modem.

Flash PR1.3, but at the end of the flash command, add --flash-only=nolo. This will force update NOLO, allowing you to boot PR1.2 and later.

Before doing that, you want to do "dmesg | grep ssi" and post the logs here.

NOTE: ALL NOKIA PHONES ASK YOU TO CHANGE THE SIM IF IT'S LOCKED, NOT QUIETLY REJECT IT.
NOTE 2: Are you sure you're not getting "SIM registration failed" error?

---

Last edited by Hurrian; 2012-03-07 at 07:07.

spajta111 | # 27 | 2012-03-08, 18:55 | Report

i did never get "SIM registration failed" error.
and how to do this: "dmesg | grep ssi"
my n900 runs only pr 1.1.1 and pr versions before that.
how do you mean to flash pr 1.3 do you meant like this:
1. flash pr 1.3 while pr 1.1.1 is allredy flashed and working.
2. and then flash only nolo from pr 1.3 image ???

and what should i do with sim problem any advice what should i do ?

Hurrian | # 28 | 2012-03-08, 20:59 | Report

(1) Use X-Terminal
(2) flasher -f -F pr1.3.rootfs.bin --flash-only=nolo
then
use backupmenu to restore a PR1.3 rootfs.

spajta111 | # 29 | 2012-03-09, 07:48 | Report

could you do a little detail tutorial because I dont understand.
i typed this in cmd FLASHER 3.5 on windows xp 32 bit:

then

i get this:

flasher v2.5.2 (Sep 24 2009)
Invalid FIASCO file header

then i try this:

i get this:

---

Last edited by spajta111; 2012-03-09 at 07:57.

zozeta2 | # 30 | 2012-03-13, 17:00 | Report

this problem is a software problem not hardware problem so u have to flash u mobile with the last flasher update when u don it restart your mobile .... go to phone click *#06# ime should be seeen if not go to app manager and update maemo5 when finish make a reboot and your sim and ime number should be back..... i prefer installing meddil east flashar