Page 3 of 54 12 3 4513 Last »
Reply
Thread Tools
Dhicky is offline Dhicky
2012-03-19 , 14:25
Posts: 131 | Thanked: 68 times | Joined on Oct 2010 @ Indonesia
#21
thank you
 
blitzlee06 is offline blitzlee06
2012-03-19 , 14:28
Posts: 67 | Thanked: 25 times | Joined on Nov 2011
#22
i upgrade before via xterm and i got multiboot so i use "apt-get install kernel-power-bootimg" im on kp49 already.. yep i follow instructions..
 
ed_boner is offline ed_boner
2012-03-19 , 14:29
Posts: 336 | Thanked: 129 times | Joined on Jan 2011 @ portugal
#23
Originally Posted by Mohammed Muid View Post
what is actually this red led btw?
red camera light..lights up when camera is active..both in photos or video capturing...stil..dont see how to do it...
 
bocephus is offline bocephus
2012-03-19 , 14:31
Posts: 150 | Thanked: 169 times | Joined on Nov 2011 @ Sweden
#24
What better way to start the week than with a new version of kernel-power!?

Upgrade went smooth, and I now have v50 up and runing! Feels great thus far.
 

The Following User Says Thank You to bocephus For This Useful Post:
shady is offline shady
2012-03-19 , 14:34
Posts: 284 | Thanked: 161 times | Joined on Dec 2009
#25
thanks, seems like it boots a bit quicker. we greatly appreciate the hard work you continue to put in pali!
 
gostyuk is offline gostyuk
2012-03-19 , 14:34
Posts: 27 | Thanked: 14 times | Joined on Nov 2011
#26
after update to v50 i can't open any movie in Maemo player. it writes unsupported media format. can anyone check and confirm... maybe i am not the only one confronting with that problem. Thx
 
Santhan is offline Santhan
2012-03-19 , 15:13
Posts: 43 | Thanked: 12 times | Joined on Apr 2011 @ Qatar
#27
Pali congrats for your hard work KP50 working very fine for me thanks....
 
nkirk is offline nkirk
2012-03-19 , 16:06
Posts: 112 | Thanked: 92 times | Joined on Nov 2010
#28
Originally Posted by freemangordon View Post
Please anyone who has not enabled SR, to do a little experimenting with default and dsp profiles and to confirm/not if SR is stable and how is the battery life with SR. Also if you have your own undervolting profile, I will appreciate a comparison between your manually tuned voltages and SR calculated. SR should be rock stable in KP50, but I need a confirmation.

Note:
Have in mind that if you have your own undervolting profile, SR would not make battery life better, at least not much.

Not stable for my device yet, did a little testing with default dsp and a modified dsp profile.

I find that SR is not stable for stock mpu clocks above 600hz, voltage seems to be too low for stability even at default DSP clock(430).

eg 720 xx 430 (voltage 45 shown with kernel config)
805 xx 430 ..

both = fail, occasional reboot when locked on each frequency with 90+ % mpu load for above 3-4 minutes.

Tried doing a dirty trick to achieve stability by using dsp boost @ 250,

I do not wish to oc the DSP unnecessarily (I use 850 xx 600 for video recording purpose),so i upped the dsp by 10 mhz to trigger the dsp boost voltages on lower clocks. which will result in the mpu being supplied with more juice.

eg 720 xx 440 (voltage 46 shown with kernel config)
805 xx 440 ...

Still not very stable when the the DSP is loaded with 720p video, it results in a definite reboot after a few minutes of playback.

I would stick with my custom profile till the issue is hopefully sorted.

/nkirk
Last edited by nkirk; 2012-03-19 at 16:14.
 

The Following User Says Thank You to nkirk For This Useful Post:
freemangordon is offline freemangordon
2012-03-19 , 16:43
Posts: 3,058 | Thanked: 12,894 times | Joined on Mar 2010 @ Sofia,Bulgaria
#29
Originally Posted by nkirk View Post
Not stable for my device yet, did a little testing with default dsp and a modified dsp profile.

I find that SR is not stable for stock mpu clocks above 600hz, voltage seems to be too low for stability even at default DSP clock(430).
Anything above 600 MHz for MPU is not stock

Tried doing a dirty trick to achieve stability by using dsp boost @ 250,
dsp boost kicks in only when DSP is active, otherwise it is not used

Still not very stable when the the DSP is loaded with 720p video, it results in a definite reboot after a few minutes of playback.
On which profile?

Could you please post both your custom profile and the result of kernel-config show with SR enabled, so I can compare calculated vs manually tuned values.

Also could you confirm(not) that SR is stable for you with "default" profile loaded, i.e. no OC
 

The Following User Says Thank You to freemangordon For This Useful Post:
corduroysack's Avatar
corduroysack is offline corduroysack
2012-03-19 , 16:53
Posts: 939 | Thanked: 366 times | Joined on Dec 2010 @ U.K.
#30
firstly thanks to everyone involved with power v50 cheers (Pali, Freemangordon)
I am using dsp profile min @ 500 max @ 805 with sr enabled and had no playback problems and no reboots. battery life seems okay as well
__________________
"I Reject Your Reality & Substitute My Own" Adam Savage
 
Reply
Page 3 of 54 12 3 4513 Last »

Tags
battery test, i <3 fmg, i <3 pali, igottaboner, kernel, kernel-power, viva fmg, viva pali

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 19:08.

Contact Us - Home - Archive - Top