uzernamezz | # 351 | 2012-03-24, 14:18 | Report

------------EDIT-------------
Got this a during a second try

---

Last edited by uzernamezz; 2012-03-24 at 14:53. Reason: New problem

HtheB | # 352 | 2012-03-24, 15:12 | Report

You didn't place the zImage file into the directory of the flasher

Sazpaimon | # 353 | 2012-03-24, 15:18 | Report

Maybe there should be a disclaimer that says "If you don't have basic problem solving skills, you shouldn't be running nitdroid until an installer comes out"

uzernamezz | # 354 | 2012-03-24, 15:22 | Report

Oh so the zImage has no extension? Thanks!

law138 | # 355 | 2012-03-24, 18:03 | Report

I keep getting this same error can anyone help.


Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Program Files\Nokia\Flasher>flasher -a DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY
_005-OEM1-958_ARM.bin -k zImage -flash-only=kernel -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

ERROR: Unknown arguments specified!
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>
C:\Program Files\Nokia\Flasher>flasher -a DFL61_HARMATTAN_30.2012.07-1_PR_LEGACY
_005-OEM1-958_ARM.bin -k zImage -flash-only=kernel -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

ERROR: Unknown arguments specified!
Usage: flasher [OPTIONS]
Options:
-V, --version Print application version
--quiet Quiet flashing, do not show progress table
-F, --fiasco=ARG Location of FIASCO image
-a, --ape-algo=ARG Location of APE algorithm image (FIASCO or pla
in)
-k, --kernel=ARG Location of kernel image
-L, --moslo=ARG Location of moslo image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root filesystem image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
-i, --read-device-id Print out the device type
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the device (after flashing)
-c, --cold-flash "Cold flash" the device
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--flash-only=ARG Flash only certain components
-M, --flash-only-mmc Shortcut for flash only MMC
-U, --usb-device=ARG Specify USB device to use, <bus>[:<device-addr
ess>]
or s:<usb-serial-number> or S:<serial-number>
-v, --trace-level[=ARG] Set or increment trace level
--erase-user-data[=ARG] Erase user data, ARG is erase method (e.g. sec
ure)
Erases eMMC and swap, resets device lock
--erase-mmc[=ARG] Erase eMMC, ARG is erase method (e.g. secure)
--suppress-warranty-warning Suppress warranty warning

C:\Program Files\Nokia\Flasher>

cpate99 | # 356 | 2012-03-24, 18:33 | Report

this is awesome!!!! I want it so bad on my n9

youmeego | # 357 | 2012-03-25, 12:07 | Report

Do the following applications work on Nitroid Alpha on N9?

1.Google Maps
2.Google Earth
3.Call and SMS
4.Whatsapp and Viber

recluse | # 358 | 2012-03-25, 14:07 | Report

All applications work in NitDroid. You can use any app and play any game that a normal Ice Cream Sandwich phone can use.
GTA 3 works. Angry Birds Space works. All those you listed work. Everything, you name it.

Of course hardware features like camera don't work so apps that use these features will be limited.

Tetlee | # 359 | 2012-03-25, 16:17 | Report

That's a shame, possibility of that working further down the line do you think?

Sniper_swe | # 360 | 2012-03-25, 17:32 | Report

law138 did you get it to work?