stevomanu | # 671 | 2012-07-03, 17:56 | Report

I really think you should do some research and learn how things work and what the app is doing and only then will you be able to do it for your self .

You need to post things like /.

What kernel your on
Wifi drivers your using

As for your fixed channel issue i have never noticed that on n900 but it does happen a lot on backtrack for desktops , i aint sure if that patch would apply to your phone ,i could be wrong thou /.

saponga | # 672 | 2012-07-03, 20:01 | Report

Dude, just zoom out using volume buttons and you' will see the all screen. Then tap Deauthenticate on cleven and, if you have been near from AP, and if there are someone connected with AP (like i can see on your 2nd screenshot) you will see the handshake notification at the right upper corner. If you can't get a handshake using deauthenticate button, just try a more especific command on terminal, just like you've read.

Edit: language error... just one of all them...

Edit 2: how about we move our a*s to this thread ?

---

Last edited by saponga; 2012-07-03 at 20:20.

paradoxy88 | # 673 | 2012-07-09, 06:04 | Report

Hi, i managed to install PKv50, and i have downloaded the latest Cleven 3.2.1, and when i run the program all is fine, i can load the injection drivers with no errors and enable monitor mode, but it seems that when i am injecting nothing is happening

Tried to do an injection test with loaded drivers :

Trying brodcast probe requests
No answer..

Doesent the latest Cleven use the drivers compatible with v50?

Femen22 | # 674 | 2012-07-09, 08:18 | Report

Thanks for this, very nice GUI...

stevomanu | # 675 | 2012-07-09, 12:43 | Report

After you have loaded up cleven and loaded the drives open terminal and do this .

Then see if you have device mon0 if not then its same issue as mine a few posts back , still waiting on a solution my self .

q6600 | # 676 | 2012-07-09, 16:01 | Report

Cleven works fine with pkv50. Did injection works from x term?

paradoxy88 | # 677 | 2012-07-10, 18:10 | Report

No, it didnt i did an injection test as described in my post.

I have tried the iwconfig command, after seting injection drivers and enabeling monitor mode in cleven :

wlan0 IEEE 802.11bg Mode: Monitor


But i dont see any mon0 interfaces.

Did i missed any step? I have purchased a stock phone, installed power kernel from App manager, and installed Cleven from app manger also. Thats it.

q6600 | # 678 | 2012-07-11, 18:18 | Report

if you go under settings- about product what version you have install
i have: 20.2010.36-2.203.1

paradoxy88 | # 679 | 2012-07-12, 08:10 | Report

21.2011.38-1

StefanL | # 680 | 2012-07-12, 08:46 | Report

That is the same version I have (ie. latest). I have working injection, but I do not use Cleven. For obvious reason (check my sig ) I am using fAircrack (latest unreleased development version 50). Sorry for the shameless plug .

More importantly though is: Which KP version are you currently running? Check this by typing Mine says 2.6.28.10-power50.

---

Last edited by StefanL; 2012-07-12 at 08:57.