reinob | # 501 | 2012-09-06, 08:16 | Report

Yes, you are missing something. You did not read the first post where the installation instructions are given.

Plus, *we* are missing something from you, namely the exact (error) output when you run dpkg to install u-boot.

aeon_light | # 502 | 2012-09-06, 21:03 | Report

If the USB port actually worked, I wouldn't have to go through all of this just to reflash the kernel .

I just tried using flasher built into the n900 image by adding it to a custom boot script (keymap doesn't let me type the dash symbol). I'm getting "Unable to enumerate USB ports" or something of that sort. I'm probably missing modules of some kind (phonet? As that seems to be what makes flasher on PCs work). Will try to modprobe that and see...

mongrol | # 503 | 2012-09-07, 00:10 | Report

Don't use application manager. Install it from the commandline using dpkg.

neomarky | # 504 | 2012-09-07, 13:18 | Report

you're right i did use HAM.. it's working now.. thank you for your help..

reinob | # 505 | 2012-09-07, 13:41 | Report

AFAIK the way to locally flash a kernel is

(see http://talk.maemo.org/showpost.php?p=922006&postcount=4)

[ OR, have a look at the postint script for kernel-flasher or kernel-power-flasher. Can't do that at the moment (work PC) ]

Good luck!

ExLuzZziVo | # 506 | 2012-09-07, 17:27 | Report

How can I use u-boot with ext4 MyDocs partition? u-boot-update-bootmenu says that i need fat32 MyDocs partition

aeon_light | # 507 | 2012-09-07, 22:13 | Report

I got "could not connect to 127.0.0.1" before the execution of flasher when using softupd - after which flasher came up with the same error. Kernel-power-flasher's postinit uses fiasco-image-update in sbin, which might work better, but I'm actually a bit hesitant to flash the kernel directly from the script without enabling R&D mode and turning off the watchdogs first, since this could result in the N900 getting shut down by the watchdog in the middle of a flash, which would leave me with no way to back out without fixing the USB port.

Edit 1: fiasco-image-update is apparently just a script running the commands from before. Oh well. I'm probably still just missing some module that it expects to be loaded... Well, that or a script that's supposed to be run after preinit.

Edit 2: Can I flash a kernel locally from a chroot? (Say, I started RescueOS, extracted a rootfs backup to what would be my /home directory on the N900, mount all necessary dev, sys, and tmpfs stuff and then chroot and flash.)

---

Last edited by aeon_light; 2012-09-08 at 04:09.

Fabry | # 508 | 2012-09-08, 19:51 | Report

You need also loopback device to flash locally.

Correct script is shown here : http://talk.maemo.org/showpost.php?p...postcount=1102

pali | # 509 | 2012-09-11, 19:41 | Report

Here is bootmenu item file for rescue os:

EDIT:
Above file was edited. Store rescue os files to /boot and run:
$ u-boot-update-bootmenu

---

Last edited by pali; 2012-09-11 at 20:11.

ade | # 510 | 2012-09-11, 21:01 | Report

Pali,

Just to be sure: I can remove the images from /boot once images are generated in /home/user/MyDocs/bootmenu.img.d after the u-boot-update-bootmenu command? Especially the rescueOS image eats too much from my rootfs....