thedead1440 | # 321 | 2012-09-25, 02:59 | Report

I think you have to flash with the same pr legacy of 341...

Maybe your carrier has locked it so you have no choice but to use pr legacy 341 for pr1.3 to flash...

aliengoa | # 322 | 2012-09-25, 10:19 | Report

There is no PR1.3 for my Variant
That's why i was trying to flash other FW

According to the first post i can upgrade my N9 and change the variant,
i want to do this: "PR1.2 variant 341 to PR1.3 variant 001"

i dont know why it doesnt work.

Is this considered a downgrade?

thedead1440 | # 323 | 2012-09-25, 12:53 | Report

It isn't considered a downgrade...Its just some carriers try to lock users out...

Anyway I think what we can do is flash both rootfs+emmc at one go...Maybe then it would go thru...

buky | # 324 | 2012-09-25, 18:10 | Report

Just a quick question. I flashed non branden ROW Firmware PR1.3 a couple of days ago, but only .bin file.

Do i have also flash emmc file also, and what is this actually.

Thanks

Zelig | # 325 | 2012-09-25, 21:41 | Report

tried to flash my Nokia N9 with my MacBook by running (as user):

Flasher -F fw.bin -F emmc.bin -f

and got:

FIASCO ERROR: FIASCO subimage data length mismatch

any idea?

EDIT: could it be that the renaming emmc image to emmc.bin is the cause? (Flasher -F fw.bin -f is working properly)

---

Last edited by Zelig; 2012-09-25 at 21:48.

thedead1440 | # 326 | 2012-09-26, 04:02 | Report

Zelig,

It means your fw image is corrupted and not downloaded correctly...

If your fw.bin flashes ok it means your emmc.bin is corrupted... Re-downloade it and try...

nikhilsyangbo | # 327 | 2012-09-30, 22:36 | Report

cn any1 plz uplaod files needed for my nokia n9 to flash its product key is 059L6B5 plz i cn'.t download it from naviframe coz my net is slow n also cn't resume it in case of dc

---

Last edited by nikhilsyangbo; 2012-09-30 at 22:39.

nikhilsyangbo | # 328 | 2012-10-01, 04:28 | Report

plz any 1 help me i'll b very thank full

chaveago | # 329 | 2012-10-02, 15:39 | Report

Hi!

I've got my N9 in Russia on 21.9.2012 (Product code is 059J208).It came with PR1.1. Same evening I performed an update to PR1.3 via WiFi and everything was OK untill last wednesday, where it rebooted by itselfs and showed "there is a problem with your SIM card" message. It makes no difference, whether or not the SIM is inside of the phone, but if it is inserted, the SIM Module gets warmer after short time. IMEI number doesn't show by *#06# or in "about product".

Flashing (only OS) didn't change that issue.

May be someone can help me.
Tnx in advance
Andy

thedead1440 | # 330 | 2012-10-02, 16:00 | Report

chaveago,

Did you ensure your sim card isn't inserted when flashing?