[Announce] Prey (anti-theft) for N9/N950 - Page 9 - maemo.org

thedead1440 | # 81 | 2012-12-16, 14:23 | Report

unoace,

The log part:

Originally Posted by

-- Updating device info...
-- Couldn't update your device. Maybe the Control Panel is taking a bath.

That shows unable to send the report; I would suggest purge prey_config totally from your device, delete the log file, delete the device in your Prey Control Panel and then set-up a new device...

aQUICK1 | # 82 | 2012-12-16, 15:36 | Report

Have a look here http://preyproject.com/

unoace | # 83 | 2012-12-17, 00:29 | Report

Can't delete prey log using file manager

EDIT:

ok its sending me reports but i cant use the alarm or any other functions from pc.

Last edited by unoace; 2012-12-17 at 02:17.

student4life | # 84 | 2012-12-17, 02:50 | Report

Originally Posted by unoace View Post

EDIT:

ok its sending me reports but i cant use the alarm or any other functions from pc.

the following lines in your earlier post of the log file, indicated the report was being send. i was about to send a message asking you to confirm not receiving any reports

Originally Posted by unoace View Post

>> Sending report!

-- Packing all gathered traces...
-- Posting data via http...
-- Report successfully saved.
-- 795 bytes uploaded in 0.701 seconds, at 1133.000 bytes/sec.
-- Dropping all traces!

have you enabled the alarm and alert modules?
from the previous log, only webcam, geo, network & session modules seems to be enabled

Originally Posted by unoace View Post

-- Got instructions for system module.
++ Queueing action for system module!
-- Got instructions for webcam module.
-- Got instructions for geo module.
-- Got instructions for network module.
-- Got instructions for session module.

geo and webcam is not working for you.

can you run following command as root(devel-su) and tell whether you get correct coordinates
/opt/prey/bin/showcoordinates

also run following command to check front camera image capture
/opt/prey/bin/takePhoto 1 /tmp/trial.jpg

The Following User Says Thank You to student4life For This Useful Post:
unoace

student4life | # 85 | 2012-12-17, 02:56 | Report

Originally Posted by evujumenuk View Post

This is pretty cool. Do you intend to post it to the Store?

some people have problems with front camera image capture.
i need to get some time to add lock feature and wifi autoconnect, for prey to be really useful.
also i need to sort out the dependencies while installing from the store
once these action items are done and there are no big problems, i plan to post it in the store

The Following 3 Users Say Thank You to student4life For This Useful Post:
evujumenuk, smoothc, unoace

unoace | # 86 | 2012-12-17, 07:05 | Report

Originally Posted by student4life View Post

the following lines in your earlier post of the log file, indicated the report was being send. i was about to send a message asking you to confirm not receiving any reports

have you enabled the alarm and alert modules?
from the previous log, only webcam, geo, network & session modules seems to be enabled

geo and webcam is not working for you.

can you run following command as root(devel-su) and tell whether you get correct coordinates
/opt/prey/bin/showcoordinates

also run following command to check front camera image capture
/opt/prey/bin/takePhoto 1 /tmp/trial.jpg

i get this from the first command

student4life | # 87 | 2012-12-17, 10:37 | Report

it means you have not installed 'python-qtmobility'

have you installed all dependencies mentioned in first page

you can as root(devel-su) run following command in a terminal and check again
apt-get install python-qtmobility

The Following User Says Thank You to student4life For This Useful Post:
unoace

unoace | # 88 | 2012-12-17, 13:17 | Report

ok i installed or reinstalled each depo 1 by 1

checked lat and log and they were correct but still cant use the functions of prey

here is my front camera image capture message:

# /opt/prey/bin/takePhoto 1 /tmp/trial.jpgPermission denied: opening file /home/user/.omap3camStaring camera without viewfinder availablePermission denied: opening file /home/user/.omap3camtaking Photoid:1, error:1, errormsg:Camera not ready

and my prey 2 log:

### PREY 0.5.3 spreads its wings!
### Linux RM696 2.6.32.54-dfl61-20121301 #1 PREEMPT Mon Apr 2 14:14:32 EEST 2012 armv7l GNU/Linux

Mon Dec 17 07:58:39 EST 2012

-- Looking for connection...
-- Got network connection!

>> Registering device under account!

-- Gathering PC info...
-- Sending request to Control Panel...
-- Device succesfully added! Applying configuration...
-- All set. Assigned key is c49ewa.
-- Checking URL...

>> Reading configuration...

-- Frequency in sync (25).

>> Reading module configuration...

-- Got instructions for system module.
++ Queueing action for system module!

>> Verifying status...

-- Got status code 200!
-- Nothing to worry about.

>> Running pending actions...

>> Running system module!

-- Creating pidfile for system's 4473...
-- Scanning current system's hardware...
-- Sending updated data...
-- Updating device info...
-- Device updated.
-- Action system exited with status 0.
-- Removing pidfile...
-- No pending actions left. All done!

-- Cleaning up!

student4life | # 89 | 2012-12-17, 13:32 | Report

reinstalling the deps fixed your geo problem.
you seem to have the same camera problem as brkn and few others. unfortunately no fix for it yet. it is something to do with not having proper permissions.
but your other modules should be working fine. can you post the log after marking the device as missing in the control panel, and enabling alarm, alert & geo modules?

The Following User Says Thank You to student4life For This Useful Post:
unoace

unoace | # 90 | 2012-12-17, 14:05 | Report

### PREY 0.5.3 spreads its wings!
### Linux RM696 2.6.32.54-dfl61-20121301 #1 PREEMPT Mon Apr 2 14:14:32 EEST 2012 armv7l GNU/Linux

Mon Dec 17 08:57:23 EST 2012

-- Looking for connection...
-- Got network connection!

>> Registering device under account!

-- Gathering PC info...
-- Sending request to Control Panel...
-- Device succesfully added! Applying configuration...
-- All set. Assigned key is 6w1wi1.
-- Checking URL...

>> Reading configuration...

-- Frequency in sync (25).

>> Reading module configuration...

-- Got instructions for system module.
++ Queueing action for system module!

>> Verifying status...

-- Got status code 200!
-- Nothing to worry about.

>> Running pending actions...

>> Running system module!

-- Creating pidfile for system's 22732...
-- Scanning current system's hardware...
-- Sending updated data...
-- Updating device info...
-- Device updated.
-- Action system exited with status 0.
-- Removing pidfile...
-- No pending actions left. All done!

-- Cleaning up!