[SOLVED] Lockscreen Glitch UI Problems N9 - maemo.org

HtheB | # 1 | 2013-03-26, 10:59 | Report

Lately, I keep getting my lockscreen like this. By default, there should be a blue banner at the top, it isn't such a big dealbreaker, but I actually want to figure out why this is happening.

I completely flashed my device, but i still get this....
does someone has any idea?

Edit:
Just noticed that the emergencycall button on the left bottom isn't showing either. But when I press the invisible button, the lockscreen crashes and doesn't react anymore...

Attached Images

Last edited by HtheB; 2013-03-27 at 05:17.

thedead1440 | # 2 | 2013-03-26, 11:02 | Report

Did you really really successfully do the full flash?

The Following User Says Thank You to thedead1440 For This Useful Post:
khan.orak

HtheB | # 3 | 2013-03-26, 11:04 | Report

Originally Posted by thedead1440 View Post

Did you really really successfully do the full flash?

Yes, as you suggested,

flasher -f -F main.bin -F emmc.bin --no-preserve --erase-user-data=secure -R

thedead1440 | # 4 | 2013-03-26, 11:21 | Report

Originally Posted by HtheB View Post

Yes, as you suggested,

flasher -f -F main.bin -F emmc.bin --no-preserve --erase-user-data=secure -R

No errors or any such thing in the output right?

That seems to be a themeing issue; you can re-install theme packages but I somehow suspect something else at play for a full reflash to cause problems...

HtheB | # 5 | 2013-03-26, 15:39 | Report

Originally Posted by thedead1440 View Post

No errors or any such thing in the output right?

That seems to be a themeing issue; you can re-install theme packages but I somehow suspect something else at play for a full reflash to cause problems...

No... Nothing

peterleinchen | # 6 | 2013-03-26, 16:02 | Report

Not sure about N9, but for N900 you needed to do the eMMC flash and then the firmware flash without rebooting. So two flash cycles were needed to completely full flash (in very rare conditions even three: fw, eMMC, fw).
So maybe try out: first eMMC erase without -R, then the firmware ...

khan.orak | # 7 | 2013-03-26, 16:13 | Report

Originally Posted by peterleinchen View Post

Not sure about N9, but for N900 you needed to do the eMMC flash and then the firmware flash without rebooting. So two flash cycles were needed to completely full flash (in very rare conditions even three: fw, eMMC, fw).
So maybe try out: first eMMC erase without -R, then the firmware ...

No need for that.

Code:

flasher -f -F main.bin -F emmc.bin --erase-user-data

The above code will combine the two flash commands.

@HtheB try this one. Did the work for me.

Adding SECURE would take too much time, wouldn't it?

The Following User Says Thank You to khan.orak For This Useful Post:
peterleinchen

HtheB | # 8 | 2013-03-26, 16:21 | Report

Originally Posted by khan.orak View Post

No need for that.

Code:

flasher -f -F main.bin -F emmc.bin --erase-user-data

The above code will combine the two flash commands.

@HtheB try this one. Did the work for me.

Adding SECURE would take too much time, wouldn't it?

Already flashed it like that

Can someone confirm it if the reason is the "refresh button" of N9 Qtweak?
Add the Refresh button by using tweak: FF - 1 - 1
and press the refresh icon on the homescreen

thedead1440 | # 9 | 2013-03-26, 16:27 | Report

Oh you are doing the new Full Refresh from N9QT? Then that is surely to be blamed; try not using that till its fully fixed...

The Following User Says Thank You to thedead1440 For This Useful Post:
HtheB

HtheB | # 10 | 2013-03-27, 05:16 | Report

Originally Posted by thedead1440 View Post

Oh you are doing the new Full Refresh from N9QT? Then that is surely to be blamed; try not using that till its fully fixed...

Didn't know it has some major problems. It's been fixed now in the newest N9Qtweak