[Announce] kernel-power stable v51 in Extras-Devel - Page 38 - maemo.org

Acurus_ | # 371 | 2013-04-07, 09:55 | Report

Upgraded to new Kernel (I do not use U-Boot!). N900 works perfect and it seems to be a little bit quicker. Thanks!

The Following User Says Thank You to Acurus_ For This Useful Post:
tanago

Estel | # 372 | 2013-04-07, 10:52 | Report

Originally Posted by NiQ View Post

Estel - You will only encounter the mentioned problem if you use KP as a bootimg through U-Boot.

No, I won't, because it is exactly what I'm doing. I've all KP packages installed, including kernel-power-bootimg, and I boot using U-boot. But, looking at control files, you *should be right*, dependencies looks like fubar. I just don't get why I don't have problems on any of three devices I've tested it?

/Estel

pali | # 373 | 2013-04-07, 11:01 | Report

I pushed kp52 to autobuilder, so enable extras-devel and run apt-get update.

U-boot can load kernel-power-bootimg. I do not see any problem, here are dependences:

Package: kernel-power
(no Depends)

Package: kernel-power-bootimg
Depends: kernel-power-modules (= ${binary:Version})

Package: kernel-power-flasher
Pre-Depends: kernel-power (= ${binary:Version}), kernel-power-modules (= ${binary:Version}), softupd (>= 0.4.0), hildon-application-manager
Depends: sudo

Package: kernel-power-modules
Depends: module-init-tools (>= 3.3), kernel-power (= ${binary:Version})

And all n900 uboot patches was upstreamed and next uboot version will be released this month. After that I will update uboot in Maemo Extras too.

The Following 16 Users Say Thank You to pali For This Useful Post:
acrux, cheve, dzano, fw190, g0r, handaxe, HELLASISGREECE, hyno111, klinglerware, m750, nokiabot, panjgoori, peterleinchen, petur, reinob, Sourav.dubey

NiQ | # 374 | 2013-04-07, 11:03 | Report

Pali -
The problem is that kernel-power-modules requires kernel-power and kernel-power (obviously) conflicts with kernel-power-bootimg.
kernel-power-modules need to be modified to depend on kernel-power | kernel-power-bootimg instead.

pali | # 375 | 2013-04-07, 11:12 | Report

Originally Posted by NiQ View Post

kernel-power (obviously) conflicts with kernel-power-bootimg.

Can you show me where?? Look at dependences in previous post again.

The Following User Says Thank You to pali For This Useful Post:
fw190

NiQ | # 376 | 2013-04-07, 11:28 | Report

Package: kernel-power-modules
Depends: module-init-tools (>= 3.3), kernel-power (= ${binary:Version})
No kernel-power-bootimg alternative.

And if I install kernel-power, it'll probably overwrite u-boot, won't it?

And another issue, apparently usbmode doesn't work anymore because kernel-power-bootimg does not provide the required kernel-features.

pali | # 377 | 2013-04-07, 12:08 | Report

Originally Posted by NiQ View Post

And if I install kernel-power, it'll probably overwrite u-boot, won't it?

No, uboot will ask you if you want to overwrite it.

Again, there are no *conflicts*. You can install it without problem.

The Following 2 Users Say Thank You to pali For This Useful Post:
fw190, reinob

disappear | # 378 | 2013-04-07, 12:29 | Report

Hi,Pali and thanks for your support to our amzanig n900,I have one question,maybe sound stupid but it is for me is important.So shoud we again installed usbmode or not.becauce I noticed than that package is already in repo(1.0.3)
regards

pali | # 379 | 2013-04-07, 12:54 | Report

I pushed usbmode package from gitorious source code. If you are not sure that you have last version, (re)install it.

The Following 4 Users Say Thank You to pali For This Useful Post:
biketool, disappear, fw190, misiak

tanago | # 380 | 2013-04-07, 13:18 | Report

@pali: I dont know if its becuase the battery applet update or kernel-power update but the applet shows "No data or battery is not calibrated", 3-4 days ago it was working properly. I tried to calibrate it once again, no matter that bq27x00.sh script showed it is already calibrated and the result is still the same. Any help ?