Page 69 of 156 « First 596768 69 707179 Last »
Reply
Thread Tools
polomarko is offline polomarko
2013-04-30 , 10:09
Posts: 43 | Thanked: 0 times | Joined on Apr 2013
#681
Originally Posted by panorton View Post
I sent my N9 to Nokia Care. It's not covered by warranty as it's Chinese but the man said he'd have a go for small money. So far he's had no luck and has sent it to head office Ireland. I'll keep you posted.

If the only way to do it its by contacting Nokia Care , than I'm doomed because there isn't any Nokia Care in my country
Anyway hope they can fix yours and than you can get any info of which was the problem, and share it with us.
Thank you
 
panorton is offline panorton
2013-04-30 , 17:23
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#682
Originally Posted by polomarko View Post
If the only way to do it its by contacting Nokia Care , than I'm doomed because there isn't any Nokia Care in my country
Anyway hope they can fix yours and than you can get any info of which was the problem, and share it with us.
Thank you
I'm told it will be Friday before my phone gets to Dublin so next week before I get any news. I'll keep you posted. So far Nokia Care think I have damaged a memory chip!
 
rekemaro is offline rekemaro
2013-04-30 , 18:05
Posts: 5 | Thanked: 0 times | Joined on Apr 2013
#683
Hey guys
I have a problem Re flashing my Nokia n9, I think he is dead .
This is the case:
product code 059j260
firmware versions for product code is the final virgin (Dfl61_Harmattan_40.2012.21_3_Pr_Legacy_001_oem1_9 58_Arm)

when I turn it on this what happen



[IMG][/IMG]

C:\Program Files\Nokia\Flasher>flasher -i
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.335.1_PR_335
Success
As you notes the frame in my n9 is different than the original one (Dfl61_Harmattan_40.2012.21_3_Pr_Legacy_001_oem1_9 58_Arm)
when I try to flash it with this command

flasher -f -F Dfl61_Harmattan_40.2012.21_3_Pr_Legacy_001_oem1_95 8_Arm.bin
the result is

C:\Program Files\Nokia\Flasher>flasher -f -F Dfl61_Harmattan_40.2012.21_3_Pr_Leg
acy_001_oem1_958_Arm.bin
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.335.1_PR_335
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 18196 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 58 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1344233902)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

The flash error is Downgrade disallowed (1344233902)
I tried all kid of command even cold flash it did not work even emme did not work

so please my story need a hero >> how can save my n9 < how can Bering it to live again >

till me what to do?? I am hopeless
 
juiceme is offline juiceme
2013-04-30 , 18:59
Community Council | Posts: 4,902 | Thanked: 12,827 times | Joined on May 2012 @ Southerrn Finland
#684
The error message "Downgrade Disallowed" is the reason.
You need to flash the device with the same or later version than what's in the device currently.

"DFL61_HARMATTAN_40.2012.21-3_PR_001" is smaller version than "DFL61_HARMATTAN_40.2012.21-3.335.1_PR_335"
 
rekemaro is offline rekemaro
2013-04-30 , 19:32
Posts: 5 | Thanked: 0 times | Joined on Apr 2013
#685
i try it see

C:\Program Files\Nokia\Flasher>flasher -f -F Dfl61_Harmattan_40.2012.21_3_Pr_Leg
acy_001_oem1_958_Arm.bin -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.335.1_PR_335
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 20569 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 62 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1344233902)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

 
juiceme is offline juiceme
2013-04-30 , 20:08
Community Council | Posts: 4,902 | Thanked: 12,827 times | Joined on May 2012 @ Southerrn Finland
#686
Read what I said earlier:
"DFL61_HARMATTAN_40.2012.21-3_PR_001" is smaller version than "DFL61_HARMATTAN_40.2012.21-3.335.1_PR_335"
You cannot flash a smaller version on top of a larger version.
Please use the same or later version as on your device.
 
rswelter is offline rswelter
2013-04-30 , 22:35
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#687
Originally Posted by polomarko View Post
Thank you, I'll definitely try that.
The link you posted its not working, anyway I got to the N9 firmware but there are a lot of options. Which should I choose to download and flash?
http://www.mrcrab.net/nokia/Nokia_N9...uctType=RM-696

Also another problem is that since i purchased the phone online, and it arrived to me with the 1.3 software, I dont know which software was previously on the phone, so I dont really know what to download
I just did a Chinese N9 myself, it can be done . go back and look at my previous posts in this thread.
 
rekemaro is offline rekemaro
2013-05-01 , 00:20
Posts: 5 | Thanked: 0 times | Joined on Apr 2013
#688
Originally Posted by juiceme View Post
Read what I said earlier:


You cannot flash a smaller version on top of a larger version.
Please use the same or later version as on your device.
Can you give me the name of version you suggestion so i will try it

Thank you for your reply
 
rswelter is offline rswelter
2013-05-01 , 00:33
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#689
Originally Posted by rekemaro View Post
Can you give me the name of version you suggestion so i will try it

Thank you for your reply
I have also seen that msg. I would not give up yet.
my sim tray was a 059M7K1 which I also had flashed a 059J250.
both ran fine on my device.
please search my previous in this forum on "another chinese story" posts and you will see how I transformed my hong kong N9 into a german one. not knowing your goal w/ the device. I would say at the least you need to do a CMT flash exactly as I did.
 
suyog is offline suyog
2013-05-01 , 04:49
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#690
Originally Posted by polomarko View Post
Thank you, I'll definitely try that.
The link you posted its not working, anyway I got to the N9 firmware but there are a lot of options. Which should I choose to download and flash?
http://www.mrcrab.net/nokia/Nokia_N9...uctType=RM-696

Also another problem is that since i purchased the phone online, and it arrived to me with the 1.3 software, I dont know which software was previously on the phone, so I dont really know what to download
I see that you have product code 059K172 which didnt get PR1.3 as per files available there. So you need to open following link and download file
Dfl61 Harmattan 30.2012.07-1 Pr Legacy 001-oem1-958 Arm.bin
This is 1.16 GB file. use this file for cmt only flash.

http://www.mrcrab.net/nokia/Nokia_N9...on=30.2012.7.1
 
Reply
Page 69 of 156 « First 596768 69 707179 Last »

Tags
flashing, nokia n9

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 00:39.

Contact Us - Home - Archive - Top