|
2013-05-19
, 05:51
|
Posts: 13 |
Thanked: 5 times |
Joined on Feb 2012
|
#2
|
|
2013-05-19
, 06:30
|
Posts: 77 |
Thanked: 53 times |
Joined on Dec 2007
@ Chester, CA
|
#3
|
I attempted to remove multiboot and installed u-boot and upgraded from power kernel 51 to 52. Unfortunately, I must have done something wrong, because I have no entries in U-boot besides the "Attached Kernel", which doesn't work of course (probably because I'm on Thumb-CSSU.)
Now, messing around with rescueOS and trying to take a look at things, I've drained my battery. Is there any way within the U-boot console to get the battery charging? I figure I can try to flash the power kernel directly (replacing U-boot), but can't get the device into update mode with the battery so low.
That's the first question. Secondly, any way to get a working kernel so I can boot into maemo and hopefully fix things up? Would flashing just the kernel work? (worth a try?).
|
2013-05-19
, 17:39
|
Posts: 254 |
Thanked: 509 times |
Joined on Nov 2011
@ Canada
|
#4
|
|
2013-05-24
, 04:43
|
Posts: 54 |
Thanked: 47 times |
Joined on Dec 2012
|
#5
|
|
2013-05-24
, 08:54
|
Posts: 189 |
Thanked: 171 times |
Joined on Jul 2011
|
#6
|
I attempted to remove multiboot and installed u-boot and upgraded from power kernel 51 to 52. Unfortunately, I must have done something wrong, because I have no entries in U-boot besides the "Attached Kernel", which doesn't work of course (probably because I'm on Thumb-CSSU.)
Now, messing around with rescueOS and trying to take a look at things, I've drained my battery. Is there any way within the U-boot console to get the battery charging? I figure I can try to flash the power kernel directly (replacing U-boot), but can't get the device into update mode with the battery so low.
That's the first question. Secondly, any way to get a working kernel so I can boot into maemo and hopefully fix things up? Would flashing just the kernel work? (worth a try?).
|
2013-05-26
, 22:09
|
Posts: 254 |
Thanked: 509 times |
Joined on Nov 2011
@ Canada
|
#7
|
Connect it to a pc usb port, and leave it there... don't try to turn it on... It might turn on by itself. Leave it be, it'll shut down again...
After 15 or more minutes... unplug, turn it on... then continue charging
Now, messing around with rescueOS and trying to take a look at things, I've drained my battery. Is there any way within the U-boot console to get the battery charging? I figure I can try to flash the power kernel directly (replacing U-boot), but can't get the device into update mode with the battery so low.
That's the first question. Secondly, any way to get a working kernel so I can boot into maemo and hopefully fix things up? Would flashing just the kernel work? (worth a try?).