[HOWTO] Comprehensive Firmware Flashing Guide for N9 - Page 84 - maemo.org

Active Topics

[Announce] genwall a simple iptables firewall (90)
to Applications by paoletto - 1 day, 2 hrs ago
N9 as WiFi repeater/extender? (1)
to Nokia N9 / N950 by paoletto - 1 day, 2 hrs ago
Sailfish OS flashing files (89)
to SailfishOS by monkeyisland - 2 days, 3 hrs ago
more...

Page 84 of 158

Thread Tools

	AMLJ	2013-06-18 , 00:25
	Posts: 226 \| Thanked: 59 times \| Joined on Sep 2010 @ Mierlo, Netherlands	#831

Hello... I've read a few guides on how to reflash the N9... Unfortunately I still can't due to it being "downgraded". Problem is, I upgraded to the last firmware version just a few days ago, so maybe that's the reason...

Code:

root@amljdebian:/home/amlj/Downloads/059H2M6_RM-696 NDT 64GB ROW BLACK# flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin 
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 004, device address 048.
Device identifier: 357923041312887 (SN: N/A)
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.340.04.1_PR_340
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 21635 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 004, device address 049.
Device identifier: 357923041312887 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_001
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 58 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init         0 %       0 /       0 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init         0 %       1 /       1 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1341314263)
[Pipe   0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

I've tried so many different ones, which seem to be very recent, but it still shows it as a downgrade and doesn't work...

Any idea what I should do?

Thanks in advance.

__________________
AMLJ**0-1-47

Quote & Reply |

	pallokallo	2013-06-18 , 02:34
	Posts: 51 \| Thanked: 32 times \| Joined on Jul 2010 @ Finland	#832

had same problems, just use the same fw that is in the phone

http://nds2.fds-fire.nokia.com/p/d/f...PRD_signed.bin

http://nds2.fds-fire.nokia.com/p/d/f...1_EMMC_340.bin

Quote & Reply |

The Following User Says Thank You to pallokallo For This Useful Post:
AMLJ

	AMLJ	2013-06-18 , 10:35
	Posts: 226 \| Thanked: 59 times \| Joined on Sep 2010 @ Mierlo, Netherlands	#833

Originally Posted by pallokallo

had same problems, just use the same fw that is in the phone

http://nds2.fds-fire.nokia.com/p/d/f...PRD_signed.bin

http://nds2.fds-fire.nokia.com/p/d/f...1_EMMC_340.bin

Thanks! Worked like a charm :3

__________________
AMLJ**0-1-47

Quote & Reply |

PIDk	2013-06-19 , 06:26
Posts: 120 \| Thanked: 83 times \| Joined on May 2012	#834

Recently I had a very strange problem with my N9.

It suddenly succumbed to reboot loop that I wasn't able to fix with R&D mode.

More interesting is my experience with trying to flash it to break reboot loop:

Code:

flasher -f -F main.bin
		– doesn't help to break reboot loop

flasher -f -F main.bin -F emmc.bin --flash-only=mmc
		– fails with error:
	...
	bb5_rdc_cert_read failed
	...
	mmc: Could not exec '/sbin/dosfslabel /tmp/sudmmcXXXXXX/internal0p1 "Nokia N9"'
	mmc: Unable to remove mount point '/tmp/sudmmcXXXXXX/mnt/home': No such file or	directory
	mmc: Could not remove mount directory /tmp/sudmmcXXXXXX/mnt: No such file or directory

flasher -f -F main.bin --erase-user-data=secure
		– fails with error:
	...
	bb5_rdc_cert_read failed
	ioctl(BLKSECDISCARD) failed for /tmp/sudmmcXXXXXX/internal0: Input/output error

Flashing with Phoenix or old beta flashers didn't help either.

At last I tried command that I didn't saw in any of the flashing manuals:

Code:

flasher -f -F main.bin -F emmc.bin

And yes, it worked like a charm! N9 flashed without errors and reboot loop was fixed!

I don't know why all manuals suggest flashing firmware and emmc in different steps but only flashing them in one step solves errors above and breaks reboot loop.

N.B.: My reboot loop wasn't caused by tweaks. Just one night my N9 turned off due to empty battery (though I remember that it was almost full in the evening) and when I tried to turn it on the following morning (after charging it to maximum) N9 stucked in endless reboot lopp. My assumption is that internal eMMC was damaged somehow. Maybe because some program didn't close properly in the evening, drained all the battery during the night and corrupted eMMC when N9 turned itself off due to empty battery.

Last edited by PIDk; 2013-06-19 at 06:42.

Quote & Reply |

The Following 2 Users Say Thank You to PIDk For This Useful Post:
danested, peterleinchen

danested	2013-06-19 , 07:42
Posts: 179 \| Thanked: 108 times \| Joined on Dec 2011 @ Bangalore	#835

it would be good if this can be merged with the flashing thread

__________________
My Contributions

Why I would still prefer the N9 with a two year old processor

Quote & Reply |

khan.orak	2013-06-19 , 08:08
Posts: 198 \| Thanked: 130 times \| Joined on Sep 2012 @ Pakistan	#836

that command is in the Second post of the Comprehensive Flashing thread

__________________
N9 - 16 GB Black Reborn

Tutorial - OpenVPN for N9

Last edited by khan.orak; 2013-06-19 at 10:05.

Quote & Reply |

PIDk	2013-06-19 , 14:24
Posts: 120 \| Thanked: 83 times \| Joined on May 2012	#837

Originally Posted by khan.orak

that command is in the Second post of the Comprehensive Flashing thread

Nope. It's a different command - it uses "--erase-user-data" flag. And fails.

Quote & Reply |

adnankamal9	2013-06-19 , 21:32
Posts: 24 \| Thanked: 2 times \| Joined on Apr 2013 @ Al-Khobar, Saudi Arabia	#838

Hi all, my N9 (I live in Middle East (Saudi Arabia), Nokia N9, 16GB, Cyan) just got switched off and not booting again. It shows the NOKIA logo and again switches off. Though I am new to flashing but I am trying to flash my N9 so that I can keep using this device as my main phone. Problem I am facing now is from the links given in this thread in the first page to download the firmware for N9 are working and the download (around 2GB) is also starting, but after sometime, it gets stuck up and gives the error as "This download has been interrupted", when I am not even touching my computer. And when I press the resume button, the download starts all over again from the start and again after some download it gives the same error and stops. I really like my N9 and would love to continue using it. Please help.

Quote & Reply |

adnankamal9	2013-06-20 , 03:36
Posts: 24 \| Thanked: 2 times \| Joined on Apr 2013 @ Al-Khobar, Saudi Arabia	#839

Originally Posted by adnankamal9

Hi all, my N9 (I live in Middle East (Saudi Arabia), Nokia N9, 16GB, Cyan) just got switched off and not booting again. It shows the NOKIA logo and again switches off. Though I am new to flashing but I am trying to flash my N9 so that I can keep using this device as my main phone. Problem I am facing now is from the links given in this thread in the first page to download the firmware for N9 are working and the download (around 2GB) is also starting, but after sometime, it gets stuck up and gives the error as "This download has been interrupted", when I am not even touching my computer. And when I press the resume button, the download starts all over again from the start and again after some download it gives the same error and stops. I really like my N9 and would love to continue using it. Please help.

Hello all, I just downloaded successfully the image (around 2 GB), but as told the Navifirm+ is not showing anything, so I am guessing we dont need it now. Anyways, when I unzip the image file which is around 2GB, i get many files in it. I understood that we need only two (2) files starting with DFL61_HARMATTAN. Now where should I keep this to get the flasher to identify these files are supposed to be used for flashing? An urgent reply will be really helpful.