Active Topics
-
[Announce] genwall a simple iptables firewall (90)
to Applications by paoletto - 1 day, 2 hrs ago -
N9 as WiFi repeater/extender? (1)
to Nokia N9 / N950 by paoletto - 1 day, 3 hrs ago -
Sailfish OS flashing files (89)
to SailfishOS by monkeyisland - 2 days, 3 hrs ago - more...
voosham |
2013-06-26
, 13:23
|
|
Posts: 12 |
Thanked: 0 times |
Joined on Jan 2013
|
#11
|
Cold flash failed the same way as previously posted.
|
|
2013-06-26
, 13:36
|
|
Guest |
Posts: n/a |
Thanked: 0 times |
Joined on
|
#12
|
Originally Posted by voosham
May have a problem there
Cold flash failed the same way as previously posted.
Did you have NitDroid on the device before ?
SHOULD be able to remove it, and restore factory image like this:
flasher -f -F main.bin --erase-user-data=secure
flasher -f -F main.bin -F emmc.bin --flash-only=mmc
Then again, never used NitDroid. But it is remarkable how many people are having issues restoring from it.
You might have luck, in that case, by asking at eeyes NitDroid forums.
|
|
2013-06-26
, 13:38
|
|
Posts: 1,067 |
Thanked: 2,383 times |
Joined on Jan 2012
@ Finland
|
#13
|
or you have crc error in your PR335 image, you could redownload it and see if it helps.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
| The Following User Says Thank You to rainisto For This Useful Post: | ||
|
|
2013-06-26
, 13:43
|
|
Guest |
Posts: n/a |
Thanked: 0 times |
Joined on
|
#14
|
Originally Posted by rainisto
Link for firmware images
or you have crc error in your PR335 image, you could redownload it and see if it helps.
http://skeiron.org/firmware/N9/40.2012.21.3/
Might be useful to be sure to locate the correct version for your product code. Just to be sure
In any case. Good suggestion to re-download.
|
|
2013-06-26
, 13:48
|
|
Posts: 12 |
Thanked: 0 times |
Joined on Jan 2013
|
#15
|
Originally Posted by nieldk
Have used this command too. No such luck so far. Have redownloaded firmware but i will try again.
May have a problem there
Did you have NitDroid on the device before ?
SHOULD be able to remove it, and restore factory image like this:
flasher -f -F main.bin --erase-user-data=secure
flasher -f -F main.bin -F emmc.bin --flash-only=mmc
Then again, never used NitDroid. But it is remarkable how many people are having issues restoring from it.
You might have luck, in that case, by asking at eeyes NitDroid forums.
|
|
2013-06-26
, 14:00
|
|
Posts: 1,067 |
Thanked: 2,383 times |
Joined on Jan 2012
@ Finland
|
#16
|
Flashing with main.bin that has valid md5checksum should do the trick as that is the most common reasons for the failure.
If flashing with valid file fails then its either broken flash hardware or messed up partition table (you can fix partition table manually with ubiboot or moslo kernels by running sdfisk from commandline. And in addition to that invalid partition table usually gives you error output that you should add --no-preserve). But having said that its 99.9% because of crc checksum, as in big files its pretty common that some bit turns in wrong way during transfer. And your pretty unlucky if your flash has broken because of wear and tear.
Last edited by rainisto; 2013-06-26 at 14:03.
If flashing with valid file fails then its either broken flash hardware or messed up partition table (you can fix partition table manually with ubiboot or moslo kernels by running sdfisk from commandline. And in addition to that invalid partition table usually gives you error output that you should add --no-preserve). But having said that its 99.9% because of crc checksum, as in big files its pretty common that some bit turns in wrong way during transfer. And your pretty unlucky if your flash has broken because of wear and tear.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
Last edited by rainisto; 2013-06-26 at 14:03.
|
|
2013-06-26
, 14:08
|
|
Posts: 12 |
Thanked: 0 times |
Joined on Jan 2013
|
#17
|
Thanks for the advice, Will post back when i have downloaded the firmware, internet is 300kbps.
|
|
2013-06-26
, 17:31
|
|
Posts: 12 |
Thanked: 0 times |
Joined on Jan 2013
|
#18
|
Originally Posted by rainisto
Downloaded them again and same errors so how do i fix the partition table like you suggested?
If flashing with valid file fails then its either broken flash hardware or messed up partition table (you can fix partition table manually with ubiboot or moslo kernels by running sdfisk from commandline. .
|
|
2013-06-26
, 17:43
|
|
Posts: 1,067 |
Thanked: 2,383 times |
Joined on Jan 2012
@ Finland
|
#19
|
Originally Posted by voosham
man sfdisk -> http://linux.die.net/man/8/sfdisk or look how fixpartitions script work in moslo filesystem.
Downloaded them again and same errors so how do i fix the partition table like you suggested?
And can you give md5sum and filename of the main.bin that you are trying to flash, so we can check if checksum is right.
__________________
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
IRC: jonni@freenode
Sailfish: ¤ Qt5 SailfishTouchExample ¤ Qt5 MultiPointTouchArea Example ¤ ipaddress ¤ stoken ¤ Sailbox (Dropbox client) ¤
Harmattan: ¤ Presence VNC for Harmattan ¤ Live-F1 ¤ BTinput-terminal ¤ BabyLock ¤ BabyLock Trial ¤ QML TextTV ¤
Disclaimer: all my posts in this forum are personal trolling and I never post in any official capacity on behalf of any company.
|
|
2013-06-30
, 08:54
|
|
Posts: 24 |
Thanked: 2 times |
Joined on Apr 2013
@ Al-Khobar, Saudi Arabia
|
#20
|
Try using command as
flasher -f main.bin -F emmc.bin -F -R
I used the one mentioned in the flashing guide and it didnt work for me so then i tried the one above. May be it'll help u.
flasher -f main.bin -F emmc.bin -F -R
I used the one mentioned in the flashing guide and it didnt work for me so then i tried the one above. May be it'll help u.