coderus | # 151 | 2013-09-19, 03:57 | Report

@TMavica well. if you watching videos very often you can choose bigger size, it will be played smoothly. but with bigger size small files will use this minimum. for example if you choose 64KB all your 1-64KB files will reserve 64KB filesystem for each file. but small size is very rare for MyDocs partition, so you can experiment here
search files smaller 64kbytes. if none or not so many you can increase size to 128, 256 and test it again and again

juiceme | # 152 | 2013-09-19, 06:09 | Report

Thank you, I was just guessing it could take same options as I have not studied it any deeper.

TMavica | # 153 | 2013-09-19, 07:49 | Report

i got boot script not found after format
but i sure the ubiboot cpio and conf are there

Return to fat32 and default fstab, back to normal, seem cant read the script when booting

---

Last edited by TMavica; 2013-09-19 at 08:37.

SourenAraya | # 154 | 2013-09-19, 08:48 | Report

Ubiboot kernel not support exFAT, meybe?

TMavica | # 155 | 2013-09-19, 08:51 | Report

maybe, I just test with Juiceme kernel, it wont booting.
stuck with boot script not found, now I back to normal, wait his patch

TMavica | # 156 | 2013-09-19, 08:53 | Report

I cant choose any kernel, Because when turn on device, it already said boot script not found, no any ubiboot come out

coderus | # 157 | 2013-09-19, 08:56 | Report

use mtd then

TMavica | # 158 | 2013-09-19, 09:00 | Report

I cant. my device not booting when use mtd, because my device is 1603 hwrev

juiceme | # 159 | 2013-09-19, 09:08 | Report

Heh, that is true

The current ubiboot (0.3.3) actually supports only vfat as the default FS on the device where it searches for the ubiboot.conf.

This will be fixed in the next release, currently I have beta testers for 0.3.4 that are running their mmcblk0p1 as ext4fs but it seems I need to support exfat also. In the new version there's a check for FSTYPE and the mount is changed accordingly...

It really did not cross my mind that when MyDocs is formatted as exfat it sure means that ubiboot cannot load conf file from there... bummer

There is a fix that would work for you , however it means you have to use either mtd4 or mtd5 as the ubiboot partition.
See, ubiboot 0.3.3 searches for the conf files in this order:
1.) mtd4/
2.) mtd5/
3.) mmcblk0p1/boot/

So if you take into use your mtd4, for example, and put your ubiboot.conf and cpio there, it will find that first and not try to search for files on mmcblk0p1/boot/

TMavica | # 160 | 2013-09-19, 09:17 | Report

just wait for new version.
by the way, my galley cant load Pictures now after I move back to MyDocs from my PC.