can someone please offer some advice?

If it ran, it's probably worked, and you can move on.

That step's not actually necessary, it just helps with running the commands (i.e. you don't have to be working from the flasher directory or use the whole path every time).

I was browsing web with my white Nokia N9 64GB.......suddenly my n9 switched off completely......No sign of life......tried to restart....no luck....plug it in with a wall charger.....no luck.....its not charging and the LED is not flashing....when I connect it with my laptop using Win Flasher.......the charging Led flashed consistently for 10-15 min thn gone again.....can anyone help.....Thnks in advance


De-assembled my beloved N9........left it for 24 hour.....assembled it again....connect with laptop....problem solved.....apparently....lets see....what happens......

Hey, guys. Just created an account.

Im in a pickle and Im forced to ask you guys for help. I recently bought used n9 (My first pay check and bought myself a new toy). I just thought I will put the 'ol n900 on shelf.

As I found some stuff from the previous user I decided to flash the device with the help of Nokia Suite. The device did some things and after a reboot SIM card wouldnt work, Meego system is freezing. I have stumbled upon this forum post - read all pages and tried to reset N9 to working condition - without success. Im fighting with this issue for 3 days.

Nokia product code: 059M7K1

• which points to China White 64GB image according to navifirm - and thats odd I have a black 16GB:/

HARMATTAN installed on device: DFL61_HARMATTAN_40.2012.21-3_PR_005

• so sais the Flasher

As I understand there is no way I can load 001 variant on my device? Can Someone please help me? If You need any further information let me know. Ill post it ASAP.

Solution:

Hi all,

just get a nokia N9 from one of my friend that couldn't use it anymore because don't remember the security code.

Look on google and find you post try it but get the following error message. Did someone get any clue on it.

Thanks

sudo flasher -f -F A6D5F456_DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin -F 59BEC3BC_DFL61_HARMATTAN_40.2012.13-7.SEAP_EMMC_SEAP.bin --erase-user-data=secure


flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 006.
Device identifier: 357923040588388 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8

Battery level 100 %, continuing.
Erasing, this may take a while.
Erase done.
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_005
Image moslo not present
Image tar skipped
Image config skipped

Battery level 97 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1342067459)
[Pipe 0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

That's your problem.
You need to get later versions for emmc and firmware.

how to open flasher through cmd.exe???

If you added the Flasher directory to the system path, just use the commands normally.

If not: cd to the folder flasher's in (C:\Program Files\Nokia\Flasher\) first, then run the commands. If the rootfs/emmc files aren't in that directory, you'll have to specify the full path to them.

Alternatively, give full paths to everything, but that's a bit of a hassle.

Hope this works on windows 8

because I can flash my n9 only with the original firmware DFL61_HARMATTAN_40.2012.21-3.232.05.2_PR_LEGACY_232_ARM_RM-696_PRD_signed.bin and not with the DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_001-OEM1-958_ARM.bin?
thanks