Porting Sailfish to N9 - Page 77 - maemo.org

billranton | # 761 | 2013-12-12, 21:00 | Report

Originally Posted by coderus View Post

@Dave999 still orientation sensor not working in sailfish, still right to left to close

The orientation sensor is working - Fingerterm rotates correctly on my n9.

Bundyo | # 762 | 2013-12-12, 21:08 | Report

Originally Posted by coderus View Post

i'm not using any other repos. just removed and readded repos using ssu. refreshed and can install xt9 now.

jolla-xt9 and jolla-xt9-cp are available in the 1.0.1.10 repos (as opposed to other packages there).

max83 | # 763 | 2013-12-12, 22:13 | Report

guys, I downloaded jolla-xt9 and jolla-xt9-cp in my own website
maybe they remove it sooner or later
so we better have them in our own server

flotron | # 764 | 2013-12-12, 22:23 | Report

Originally Posted by max83 View Post

guys, I downloaded jolla-xt9 and jolla-xt9-cp in my own website
maybe they remove it sooner or later
so we better have them in our own server

Gorden | # 765 | 2013-12-12, 22:45 | Report

Give it a bugfix for the accu bme?

czdosi | # 766 | 2013-12-12, 22:53 | Report

Hi there, I have some notes to ssu configuration and Store application.

I played with it a lot. And there is version of /etc/ssu/ssu.ini which works for me in last vgrade image (r3). Note: there is missing part in the file:

Code:

[credentials-store]
password=some_pwd_hash
username=your_jolla_acount_username

But Store application should add it for you.

To try if file works for you just do:
1. Backup your old ssu.ini (for sure)
2. Replace by my file (remove .txt from end of file name)
3.

Code:

ssu ur #refresh zypp repositories

4.

Code:

ssu lr #to check

Output of last command should be:

Code:

Enabled repositories (global): 
 - apps     ... https://releases.jolla.com/jolla-apps/1.0.1.10/armv7hl/
 - hotfixes ... https://releases.jolla.com/releases/1.0.1.10/hotfixes/armv7hl/
 - jolla    ... https://releases.jolla.com/releases/1.0.1.10/jolla/armv7hl/

Enabled repositories (user): 
 - aliendalvik     ... https://store-repository.jolla.com/releases/1.0.1.10/aliendalvik/SbJ/
 - eas             ... https://store-repository.jolla.com/features/latest-release/eas/armv7hl/
 - limited-nemo-mw ... http://repo.merproject.org/obs/home:/vgrade:/branches:/nemo:/devel:/mw/latest_armv7hl/
 - nemoadaptation0 ... http://repo.merproject.org/obs/nemo:/devel:/hw:/ti:/omap3:/n9xx-common/latest_armv7hl/
 - nemoadaptation1 ... http://repo.merproject.org/obs/nemo:/devel:/hw:/ti:/omap3:/n950-n9/latest_armv7hl/
 - store           ... https://store-repository.jolla.com/SbJ/armv7hl/

Disabled repositories (global, might be overridden by user config): 

Disabled repositories (user): 
 - adaptation1 ... https://releases.jolla.com/releases/1.0.1.10/nemo/adaptation-n950-n9/armv7hl/
 - thirdparty  ... https://store-repository.jolla.com/releases/1.0.1.10/thirdparty/
 - adaptation0 ... https://releases.jolla.com/releases/1.0.1.10/nemo/adaptation-n9xx-common/armv7hl/

After that, run Store application and try install something (not Android support). Or if it doesn't work remove yours Jolla account and add it again.

Notes:
1. Don't use "release=latest", because it seems that simlink on server points to 1.0.0.5. Which causes information about update still occur.
2. Default configuration (if I removed ssu.ini and run ssu and Store) for repos "store" and "aliendalvik" contains string "N9" instead of "SbJ". But URL with "N9" is invalid.
3. Same for "adaptation0" and "adaptation1" -- repos was generated automatically but probably exists only on protected Jolla servers (unfortunately).

Attached Files

ssu.ini.txt (838 Bytes, 882 views)

Last edited by czdosi; 2013-12-12 at 22:57.

The Following 14 Users Say Thank You to czdosi For This Useful Post:
amandalam, anapospastos, ck2nb, evander_f, hrbani, mattaustin, max83, MFaroTusino, milad ghusn, qole, rcolistete, TMavica, vgrade, ZLooM

SourenAraya | # 767 | 2013-12-12, 23:35 | Report

I do not know why sound cracks, when installing package by hand to the minimum image MER cracks were too. In this release I fixed mode switching.

Originally Posted by coderus View Post

@SourenAraya tell please what changed. nobody wants to start from scratch

Code:

zypper ar -G http://n9.araya.su/repos/nemo-mw_limited_ohm ohm
zypper in policy-settings-basic-n950

usermod -a -G privileged nemo
sed -i 's/system/privileged/' /etc/dbus-1/system.d/org.nemo.passwordmanager.conf
reboot

Originally Posted by coderus View Post

@Dave999 still orientation sensor not working in sailfish, still right to left to close

Accelerometer working, if you rotate phone when fingerterm is running its rotated too. Maybe default orientation is landscape...

Originally Posted by vgrade View Post

Nice work

If you want I can add you to my nemo limited project on OBS so we can keep the limited packages in one place.

BR

vgrade

yep, good idea.

The Following User Says Thank You to SourenAraya For This Useful Post:
mattaustin

Hurrian | # 768 | 2013-12-12, 23:59 | Report

Originally Posted by SourenAraya View Post

Accelerometer working, if you rotate phone when fingerterm is running its rotated too. Maybe default orientation is landscape...

IIRC, panel used in N9/50 is 854x480, and not 480x854.
NITDroid has to set hwrotation of 90 degress to fix this.

The question is, what needs patching to remap the screen as 480x854?

Garp | # 769 | 2013-12-13, 00:15 | Report

Originally Posted by coderus View Post

@Garp pervert hero. thats it.

Yeah now I se what you meant! Hello:!

G_OS6_INIT_CMDLINE_APPENDS="vram=6m omapfb.vram=0:6M"
G_OS6_INIT_CMDLINE_FILE=""

As it is with home partition 3.
Ok I will try it even if the other solution also works but maybe yours are better, Sailfish still troublesome and 'heavy' working!

Edit: Thanks, It's better!

Last edited by Garp; 2013-12-13 at 00:27.

qole | # 770 | 2013-12-13, 00:31 | Report

Originally Posted by czdosi View Post

Note: there is missing part in the file:

Code:

[credentials-store]
password=some_pwd_hash
username=your_jolla_acount_username

But Store application should add it for you.

After that, run Store application and try install something (not Android support). Or if it doesn't work remove yours Jolla account and add it again.

I just CANNOT get it to put any credentials into the ssu.ini file! It doesn't update the file, no matter how many times I remove my account, add it back, run the store app...