Active Topics
-
OS2006/Maemo 2 posts? (0)
to Community by teroyk - 1 day, 20 hrs ago -
Help needed to recover from botched user config preventing boot (1)
to MeeGo / Harmattan by Halftux - 1 day, 20 hrs ago -
Maemo repository (37)
to Community by dredlok706 - 2 days, 18 hrs ago -
Brand new Nokia N9 dont power on (3)
to Nokia N9 / N950 by teroyk - 4 days, 16 hrs ago -
Mono Diablo Packages (2)
to OS2008 / Maemo 4 / Chinook - Diablo by meetpatty - 5 days, 6 hrs ago -
Maemo 20th Anniversary (5)
to Brainstorm by teroyk - 5 days, 14 hrs ago -
Sailfish OS for the Samsung Galaxy Note 4 (SM-N910C) - (treltexx) (80)
to SailfishOS by edp17 - 5 days, 14 hrs ago - more...
JjyKs |
2014-01-21
, 19:18
|
|
Posts: 14 |
Thanked: 21 times |
Joined on Nov 2011
|
#61
|
Just received my receiver. Same one as rainistos. Used a bit of sandpaper to remove some plastic from backcover to make it thinner. Fully assembled with hot glue (gun broke so had to heat it up with soldering iron.. That's why it's so black), so easy to remove if needed and nothing visually changed from the outside.
 |
|
2014-01-21
, 19:34
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#62
|
Originally Posted by Boxeri
"For any device that is Qi-wireless charging capable"
Anyone know if this could be used with the Jollas The Other Half?
If you add Qi compatible receiver to TOH, then it is...
|
|
2014-01-21
, 19:50
|
|
Posts: 499 |
Thanked: 836 times |
Joined on Jun 2012
@ Finland
|
#63
|
Originally Posted by kimmoli
Yes, and what I wondered was that one of the perks is an receiver for Samsung galaxy s4. Shouldn't that be compatible? Didn't see any output voltages though
"For any device that is Qi-wireless charging capable"
If you add Qi compatible receiver to TOH, then it is...
__________________
- "Only two things are infinite, the universe and human stupidity, and I'm not sure about the universe."
- Albert Einstein
- "Only two things are infinite, the universe and human stupidity, and I'm not sure about the universe."
- Albert Einstein
|
|
2014-01-22
, 01:42
|
|
Posts: 3,401 |
Thanked: 1,255 times |
Joined on Nov 2005
@ London, UK
|
#64
|
Regarding that Kickstarter ARK product... I'm left speechless that it is not possible to charge the ARK battery itself using a wireless charger - that seems really really dumb! It seems some people will back any old sh1t. 
Didn't Nokia announce (not sure if they're shipping) a mobile wireless charging solution (aka battery in a box) that could also be charged wirelessly? Ah yes, Nokia DC-50. The Nokia is Qi compatible, and does everything already that the ARK should be doing, which makes me wonder why ARK think they are unique? The only negative for the Nokia is the rather small capacity battery.
Didn't Nokia announce (not sure if they're shipping) a mobile wireless charging solution (aka battery in a box) that could also be charged wirelessly? Ah yes, Nokia DC-50. The Nokia is Qi compatible, and does everything already that the ARK should be doing, which makes me wonder why ARK think they are unique? The only negative for the Nokia is the rather small capacity battery.
|
|
2014-01-22
, 18:59
|
|
Posts: 231 |
Thanked: 143 times |
Joined on Feb 2012
@ Tallinn, Estonia
|
#65
|
I just received my two sets of Touchstone charger pads and receivers. Installed one receiver to my white and other to my poppy red other half.
However, I have problems. First - every second or two I am receiving charging notifications and it is very annoing.
Second issue is that while charging either charger or receiver is making quiet, but still clearly audiable electrical whining noise. Is it normal?
These issues I have with my both sets of receivers / chargers. I am using 1A charger connected to the Touchstone pad. Any suggestions?
EDITED:
Checked with CSD tool and it is not charging. It just circulates between "Full" and "Discharging". However, battery level is only at 21%.
EDITED2: Somehow problems just solved by themselves. No noise and it is charging now properly. Do not know, what the issue was.
Last edited by Silwer; 2014-01-22 at 21:32.
However, I have problems. First - every second or two I am receiving charging notifications and it is very annoing.
Second issue is that while charging either charger or receiver is making quiet, but still clearly audiable electrical whining noise. Is it normal?
These issues I have with my both sets of receivers / chargers. I am using 1A charger connected to the Touchstone pad. Any suggestions?
EDITED:
Checked with CSD tool and it is not charging. It just circulates between "Full" and "Discharging". However, battery level is only at 21%.
EDITED2: Somehow problems just solved by themselves. No noise and it is charging now properly. Do not know, what the issue was.
Last edited by Silwer; 2014-01-22 at 21:32.
 |
|
2014-01-23
, 07:31
|
|
Posts: 4,708 |
Thanked: 4,649 times |
Joined on Oct 2007
@ Bulgaria
|
#66
|
I had that too, turned out the pins on the back didn't make good contact with the wireless charger.
__________________
Technically, there are three determinate states the cat could be in: Alive, Dead, and Bloody Furious.
Technically, there are three determinate states the cat could be in: Alive, Dead, and Bloody Furious.
|
|
2014-01-24
, 11:43
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#67
|
If you want to check voltage from your wireless charger input
it can be found from sysfs, Result is in µV
e.g. Result:4968042 Raw:33138 = 4.97V
cat /sys/devices/platform/msm_ssbi.0/pm8038-core/pm8xxx-adc/dcin
USB input voltage
cat /sys/devices/platform/msm_ssbi.0/pm8038-core/pm8xxx-adc/usbin
it can be found from sysfs, Result is in µV
e.g. Result:4968042 Raw:33138 = 4.97V
cat /sys/devices/platform/msm_ssbi.0/pm8038-core/pm8xxx-adc/dcin
USB input voltage
cat /sys/devices/platform/msm_ssbi.0/pm8038-core/pm8xxx-adc/usbin
|
|
2014-01-24
, 20:33
|
|
Posts: 1 |
Thanked: 1 time |
Joined on Jan 2014
@ Germay
|
#68
|
Hey,
today i have received my jolla and had also tried to make a wireless charging TOH with a Palm Touchstone.
I have used a flat band wire to connect to the contacts. I flattend it with pliers and fixed it with superglue.
I had problems with the original USB cable, the jolla wasn't getting enough power. I changed it for the one of the N9 and it works fine.
Pictures:
http://www.flickr.com/photos/barcoder/12122581495/
http://www.flickr.com/photos/barcoder/12122871913/
today i have received my jolla and had also tried to make a wireless charging TOH with a Palm Touchstone.
I have used a flat band wire to connect to the contacts. I flattend it with pliers and fixed it with superglue.
I had problems with the original USB cable, the jolla wasn't getting enough power. I changed it for the one of the N9 and it works fine.
Pictures:
http://www.flickr.com/photos/barcoder/12122581495/
http://www.flickr.com/photos/barcoder/12122871913/
| The Following User Says Thank You to baracoder For This Useful Post: | ||
|
|
2014-01-27
, 18:12
|
|
Posts: 123 |
Thanked: 108 times |
Joined on Oct 2008
@ Prague, Czech
|
#69
|
Ok, I make own. 
Bought this on eBay.
Polarity is easy exchanged by shift power strip (on naked receiver).
No need to make crossing as made @Wonko.
The spacing between contacts is reduced by cut with scissors.
When charger pad is powered by standard Jolla 1A power adapter, phone is charged by 550-600mA in good position on charger pad.
But on charger pad is info: Input 5V 2A, Output 5V 1A ..
And result in more images.
Last edited by Kaacz; 2014-02-26 at 19:32.
Bought this on eBay.
Polarity is easy exchanged by shift power strip (on naked receiver).
No need to make crossing as made @Wonko.
The spacing between contacts is reduced by cut with scissors.
When charger pad is powered by standard Jolla 1A power adapter, phone is charged by 550-600mA in good position on charger pad.
But on charger pad is info: Input 5V 2A, Output 5V 1A ..
And result in more images.
Last edited by Kaacz; 2014-02-26 at 19:32.
|
|
2014-01-27
, 18:13
|
|
Posts: 73 |
Thanked: 35 times |
Joined on Jun 2013
|
#70
|
/\ result link not working