Mohjive | # 181 | 2014-02-03, 21:57 | Report

I meant the assembly, not PCB printing (I cannot do PCB-printing either).

Have you looked at http://i.materialise.com/ ? They seem to be able to do 0.3mm details with ABS. And they have a lot of interesting materials, like alumide and resin (and even titanium)

Mohjive | # 182 | 2014-02-03, 21:58 | Report

And I do understand you caring for your baby. I'm just fascinated and curious.

kimmoli | # 183 | 2014-02-03, 22:13 | Report

It is not the details, it is the wall thickness,
ABS Minimum wall thickness 1 mm (no good)

minimos | # 184 | 2014-02-04, 06:20 | Report

You need to up the ante and go for 'OLED display - titanium edition'

tuXer | # 185 | 2014-02-05, 07:58 | Report

I'd like to order this. Am I too late, vote's been closed already?

kimmoli | # 186 | 2014-02-06, 11:35 | Report

some photos of first sample. (I have to work on the support-bars as the material is translucent)

Mohjive | # 187 | 2014-02-06, 23:07 | Report

Noticed that you don't have a cover detection "rib". Is that only used for NFC reading or general cover detection?

kimmoli | # 188 | 2014-02-07, 05:15 | Report

Nice spotting... it is still missing from these prototypes, but should be there in next version.

It triggers NFC and eeprom read.

egnat69 | # 189 | 2014-02-07, 07:57 | Report

for future iterations (like when kimmoli starts to make his living only by selling TOHs ;D) it would be a nice feature to have an nfc-tag that installs/autostarts the engine for the oled-display... does anyone have experience with that stuff?

kimmoli | # 190 | 2014-02-07, 08:09 | Report

atm it is planned that the oled toh will use nfc for such purpose, there might be even special derp-ambience... am i promising too much

(There might be some issues if the oled toh daemon rpm needs also pass harbour-rules)