amigo | # 71 | 2013-01-07, 00:44 | Report

I had to toggle that "reg_from_outside = no;" setting to get sipgate working via vpn9c. I did it as imagomundi describes it here
In my case it was a fritzbox 7270v3 running firmware 74.05.22.

But only sipgate is working for me right now. Other accounts do not, e.g. sip2sip.info, nor does the N9 work as an IP-phone via VPN.

By the way, with a shared secret, that contained a "[" und a ")" I could not establish the VPN tunnel, because of the Group Pwd being wrong. After I had removed just those two characters, the problem was gone.

Edit: I cannot repeat calls with sipgate through VPN. No idea what might be the difference.

---

Last edited by amigo; 2013-01-12 at 17:47.

Helmo | # 72 | 2013-01-10, 15:04 | Report

Hi,

it seems there is a bug in the firmware '54.05.29-24296' of the FritzBox.
SIP over VPN is running without problems using another VPN-Server.

But I had to find out that using a vpn-tunnel with vpn9c is draining the battery very heavily. So it's no good idea to establish a vpn-tunnel as long as you are connected to 3G/Wifi-Hotspot...

chilango | # 73 | 2013-01-10, 15:49 | Report

I have it runing on my FB7270 and its working.
You need to set reg_from_outside on the fritzbox to use them like an SIP-Provider.

I have the problem that my N9 have vpn9c connection to FB and sip registred on Fritzbox.
Incomming and outgoing calls are working but i have no audio transfer in any direction

Think i will do a new thread N9 SIP-Connection with Fritz!Box

koorosh-n9 | # 74 | 2013-01-11, 17:31 | Report

hi
i have a few problem
first of all sorry for my Poor English

i've got No Response From Target error from GUI and Console ,
How Can i Fix it !?

www.rzr.online.fr | # 75 | 2013-08-05, 18:28 | Report

do you plan to support openvpn too ?

btw are those sources up to dates :

http://www.guru-group.fi/~too/vpn9c/

Unit247 | # 76 | 2014-03-06, 10:36 | Report

Hey quick question: Can you port it to sailfish, too? VPNC is available, but a GUI like yours would be awesome

mcbook | # 77 | 2014-03-06, 14:33 | Report

don't think that this is still under active development

jalyst | # 78 | 2014-03-08, 14:58 | Report

Better of trying to contact the dev directly (find that source), rather than from here (PM from here could help too).

too | # 79 | 2014-05-12, 19:12 | Report

Sorry for slow reply :/

I don't think I have time/interest to port that to Jolla -- Jolla is interesting
and I might have one when my N9 breaks down (that will be several
years as my track record of keeping phones working is good, although
N900 broke before 3 years...) -- unless Jolla publishes phone with
hardware keyboard (I am not holding my breath)...
... bigger reason is that vpn9c does now work for me anymore as the
authentication method changed a bit -- I also used it in purposes that
make lock dialog harder to use, so I've reverted out of it. ssh tunnels
are what I now use...
The guru-group link provided above contains the latest code (i think),
I could make a git repository available somewhere is there were interest...

chilango | # 80 | 2015-05-14, 17:55 | Report

@too

can you put VPN9C in Openrepos.net or can i do it with your permision?