[HELP] My N9 CALL Volume is Low - Page 3 - maemo.org

thedead1440 | # 21 | 2013-01-30, 09:57 | Report

Originally Posted by nbedford View Post

Really, I thought the N9QT vol patche was based on all previous I had seen which got reset after call. If this is true I will have to take another look.

The N9QT tweak asks you if you want to enable this at startup and if so it won't be brought down; its enabled in mine and see the below to see my current setting due to N9QT:

Code:

Simple mixer control 'PreDriv',0
  Capabilities: pvolume penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 3
  Mono:
  Front Left: Playback 3 [100%] [6.00dB]
  Front Right: Playback 3 [100%] [6.00dB]

bibek | # 22 | 2013-01-30, 10:54 | Report

I dont know why but aftr doing a call, the speaker volume becomes normal again.
If I apply the tweak again, then volume boosts again. Weird.

And anything about earpiece volume? To increase in-call sound?

zlatko | # 23 | 2013-02-03, 07:46 | Report

Just a follow up with my problem - all of a sudden call volume went back to normal on my device. That is without any intervention from my side.
I still can't tell if it was HW of SW related problem. But "all is well when end well"

Mr.Pancake | # 24 | 2013-05-10, 12:41 | Report

No solution?

Win7Mac | # 25 | 2013-05-14, 22:36 | Report

Don't like the idea of blasting my speakers incidentally but would like to make use of N9QT tweak S, but not with 100%, rather something like 80-85%. Would that be possible?

As far as Schturman remembers from some russian forum it seems not.

Is that the last word?

mr666acdc | # 26 | 2014-01-15, 17:49 | Report

I found the solution to icrease call volume(earpiece). Edit file

Code:

/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf

and change in

Code:

# Enable earpiece output from DAC2 left channel only.
[Element Earpiece Mixer AudioL1]
switch = off
[Element Earpiece Mixer AudioR1]
switch = off
[Element Earpiece Mixer AudioL2]
switch = on
[Element Earpiece Mixer Voice]
switch = off
[Element Earpiece]
volume = 2

to

Code:

volume = 3

Reboot. Until now the earpiece volume will be 100%, even after reboot/call.

The Following 9 Users Say Thank You to mr666acdc For This Useful Post:
alephito, anthonie, dommau, ekze, freaksamael, herdem09, imaginaryenemy, mautz, pmeuh

mautz | # 27 | 2014-03-24, 21:23 | Report

Even with the tips in the above post the call volume was too low on my N9, so i had to edit the file

Code:

/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf

even more.

I changed the volume limit in line 32 from 17 to 18:

Before:

Code:

volume-limit = 17 # steps 0-18, 0: -24dB 12: 0dB 17: 10dB 18: 12dB

After

Code:

volume-limit = 18 # steps 0-18, 0: -24dB 12: 0dB 17: 10dB 18: 12dB

and the volume limit of the Element DAC2 Digital Fine to 100(line 56)

Before:

Code:

[Element DAC2 Digital Fine]
volume = 61

After:

Code:

[Element DAC2 Digital Fine]
volume = 100

Maybe this is helpful for someone.

Last edited by mautz; 2014-03-24 at 21:28.

The Following 3 Users Say Thank You to mautz For This Useful Post:
ekze, herdem09, pmeuh

pmeuh | # 28 | 2014-03-26, 19:12 | Report

mr666acdc & mautz: THANKS A LOT. You guys are legend !

I can now use my phone in loud environment such as Paris metro. Awesome! Ausgezeichnet!

The Following User Says Thank You to pmeuh For This Useful Post:
herdem09

mautz | # 29 | 2014-03-28, 09:09 | Report

To get the call volume a bit more louder again, edit the file

Code:

/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf

.

Change

Code:

[Element DAC2 Digital Coarse]
Volume = 1

to

Code:

[Element DAC2 Digital Coarse]
Volume = 2

Do not set it to 3, it will reset it to 1 again, only 1 and 2 are possible.

The Following 2 Users Say Thank You to mautz For This Useful Post:
Alexxxl, ekze

Alexxxl | # 30 | 2014-05-13, 11:11 | Report

gathered a simple package.
If there are ideas on completion - will be glad to hear.

https://openrepos.net/content/alexxxlrus/volume

The Following 3 Users Say Thank You to Alexxxl For This Useful Post:
ekze, imaginaryenemy, MarcAnton