| The Following User Says Thank You to Copernicus For This Useful Post: | ||
and as a preacaution you can set a timer that disables leds after 3 minuts unless the user has popped up the values
But just to reiterate my position from last year, after having studied the documentation on the N900's flash hardware, I'm just not comfortable with driving the white LEDs constantly at high power, as that can potentially burn them out. Lanterne's torch runs the LEDs at the only power level that has been explicitly labeled as safe for continuous use, so I'm just going to stick with that... | The Following User Says Thank You to Estel For This Useful Post: | ||
static struct adp1653_platform_data rx51_adp1653_platform_data = {
.power = rx51_adp1653_power,
/* Must be limited to 500 ms in RX-51 */
.max_flash_timeout = 500000, /* us */
/* Must be limited to 320 mA in RX-51 B3 and newer hardware */
.max_flash_intensity = 19,
/* Must be limited to 50 mA in RX-51 */
.max_torch_intensity = 1,
.max_indicator_intensity = ADP1653_REG_OUT_SEL_ILED_MAX,
};
| The Following User Says Thank You to Copernicus For This Useful Post: | ||
| The Following 3 Users Say Thank You to pichlo For This Useful Post: | ||
| The Following 3 Users Say Thank You to Estel For This Useful Post: | ||
.)
| The Following 2 Users Say Thank You to Selene For This Useful Post: | ||
.