Active Topics
-
HDMI with Leste (1)
to Maemo 7 / Leste by teroyk - 2 days, 16 hrs ago -
Firefox with Leste (9)
to Maemo 7 / Leste by teroyk - 4 days, 18 hrs ago - more...
|
2015-06-22
, 20:02
|
|
Posts: 106 |
Thanked: 372 times |
Joined on Jan 2012
|
#1372
|
Not sure if this would help anyone, but I send this anyway.
I have two Jollas.
One that I have used since I got it as "the first one".
I have a lot of applications and I also had the old battery drain fix applied (nfc disabled). I installed the TOHKBD software from kimmoli's link. Had a lot of problems, reported also here. After some settings applied (repetition delay and speed) I got it working. Only few keys backlight was not working. Then came OS update. Almost the same problems came back, multiple and strange characters appear when pressing a key. No settings change helps. Phone did not recognize TOHKBD. At this point I removed that battery drain fix (enabled nfc). Needed some reboots and time, then TOHKBD was recognized and I could install software from Jolla shop. But the problems are still the same.
The other Jolla came back from my niece, she had dropped it and the display (not the screen) was broken. I finally got it fixed couple of weeks ago. I reinstalled (factory reset) few softwares, even Android. That Jolla recognized TOHKBD without any problem. With the same settings as the other Jolla, it works. Only the same backlight problem exists, and few keys need harder pressing, but no extra characters.
So, it can be your phone (and maybe the installed softwares) and not the TOHKBD that causes the problems.
I have two Jollas.
One that I have used since I got it as "the first one".
I have a lot of applications and I also had the old battery drain fix applied (nfc disabled). I installed the TOHKBD software from kimmoli's link. Had a lot of problems, reported also here. After some settings applied (repetition delay and speed) I got it working. Only few keys backlight was not working. Then came OS update. Almost the same problems came back, multiple and strange characters appear when pressing a key. No settings change helps. Phone did not recognize TOHKBD. At this point I removed that battery drain fix (enabled nfc). Needed some reboots and time, then TOHKBD was recognized and I could install software from Jolla shop. But the problems are still the same.
The other Jolla came back from my niece, she had dropped it and the display (not the screen) was broken. I finally got it fixed couple of weeks ago. I reinstalled (factory reset) few softwares, even Android. That Jolla recognized TOHKBD without any problem. With the same settings as the other Jolla, it works. Only the same backlight problem exists, and few keys need harder pressing, but no extra characters.
So, it can be your phone (and maybe the installed softwares) and not the TOHKBD that causes the problems.
| The Following 4 Users Say Thank You to Heik For This Useful Post: | ||
|
|
2015-06-22
, 20:41
|
|
Posts: 172 |
Thanked: 170 times |
Joined on Jan 2010
@ Sweden
|
#1373
|
It arrived! My Orange-on-Black-with-Kelo-backing TOHKBDv2! It is glorious, magnificent and perfect! Every single key works as it should! Thanks to you all: my phone is finally complete! :-)
 |
|
2015-06-23
, 12:26
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#1376
|
Originally Posted by viking65
Blue keys are "Sym" (for now), the Alt-Sym shall be ignored for now.
What do we call the blue keys ?
Sym has been suggested, but is taken by Alt-Sym, so are they:
Blue-, AltGr-, Fn-, Mod-, Meta-, Super-, Hyper-, ... keys ?
The functionality is mostly as AltGr keys.
What is the intended purpose of the Alt-Sym thingy - currently, it doesn't do anything ?
| The Following User Says Thank You to kimmoli For This Useful Post: | ||
|
|
2015-06-23
, 12:28
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#1377
|
Originally Posted by Heik
All input is welcome.
Not sure if this would help anyone, but I send this anyway
....
So, it can be your phone (and maybe the installed softwares) and not the TOHKBD that causes the problems.
Check with ps ax | grep -i toh that there is tohd and harbour-tohkbd2 and harbour-tohkbd2-user running.
| The Following User Says Thank You to kimmoli For This Useful Post: | ||
|
|
2015-06-23
, 12:31
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#1378
|
Originally Posted by viking65
Propably some mobile apps do not support it, i'll check it is mapped to correct insert.
The Ins key does nothing...
Originally Posted by viking65
There is limited number of backlight leds to keep current drain in reasonable level, and i believe placing is close to optimal now...
There are two colums of keys: 3,w,s,x,Shift(Left) and 0,o,l,!,@ which have very little backlight.
Originally Posted by viking65
There is some ideas to improve that. we'll see in future updates.
A CapsLock-like stickiness of Ctrl and Blue could be useful, maybe exclusive (one cancels the other) ?
Originally Posted by viking65
There will something like this when the keyboard mapping editor comes out
In the Settings app, a keyboard tester could be nice.
Show a map of the keyboard, light up the keys as they are pressed
|
|
2015-06-23
, 16:22
|
|
Posts: 1,290 |
Thanked: 4,319 times |
Joined on Oct 2014
|
#1380
|
Originally Posted by juiceme
Envey envey envey, still waiting waiting waiting
I just love this thing!
(typing on my shiny new TOHKBD...)
__________________
You can still support my work by donation - click here
You can still support my work by donation - click here
 |
| Tags |
| keyboard, kickstarter, other half, tohkbd |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 11:24.
but all good points, thanks for your input!