SailfishOS 2.0 on Nexus 5 - Page 25 - maemo.org

m4r0v3r | # 241 | 2015-11-19, 17:53 | Report

Originally Posted by asa View Post

What am I doing wrong?

I unlocked and installed cm11. Everything went fine.

But now I cannot install SFOS on top of it...
I have tried to flash it over cm and beside it with multirom. It always gets stuck on the Google bootloader. WIth multirom cm starts fine.

Here are some pics from the process
https://dl.dropboxusercontent.com/u/...28Small%29.jpg

https://dl.dropboxusercontent.com/u/...28Small%29.jpg

https://dl.dropboxusercontent.com/u/...28Small%29.jpg

which cm are you using?

asa | # 242 | 2015-11-19, 18:27 | Report

Originally Posted by romu View Post

The first run is pretty long. Your screenshots seem normal to me.

How long should I wait? I've let it run for about 5 minutes, as it says in mer-wiki: Reboot the device and it should boot to Sailfish OS. If the device shows Google logo for 4-5 minutes, do a reboot using power button.

I'm using cm11 from the installation guide:
Download CyanogenMod 11 snapshot M11 from https://download.cyanogenmod.org/get...hammerhead.zip and follow instructions from http://wiki.cyanogenmod.org/w/Install_CM_for_hammerhead to install the CyanogenMod image.

breiti_oi | # 243 | 2015-11-19, 18:52 | Report

Originally Posted by BluesLee View Post

Install keyboard prediction as root

Code:

 pkcon install store-client jolla-xt9 jolla-xt9-de

I just installed 2.0.0.10, Jolla Store works out the box now so it doesn't need to be installed again, but i couldn't get the word prediction to work.

m4r0v3r | # 244 | 2015-11-19, 22:20 | Report

Originally Posted by asa View Post

How long should I wait? I've let it run for about 5 minutes, as it says in mer-wiki: Reboot the device and it should boot to Sailfish OS. If the device shows Google logo for 4-5 minutes, do a reboot using power button.

I'm using cm11 from the installation guide:
Download CyanogenMod 11 snapshot M11 from https://download.cyanogenmod.org/get...hammerhead.zip and follow instructions from http://wiki.cyanogenmod.org/w/Install_CM_for_hammerhead to install the CyanogenMod image.

did you try without multirom?

so install Cynagenmod, then install Sailfish OS onto then reboot?

asa | # 245 | 2015-11-20, 07:50 | Report

Originally Posted by m4r0v3r View Post

did you try without multirom?

so install Cynagenmod, then install Sailfish OS onto then reboot?

Yep. Tried it again, but no luck.

This is what I did

First install CM11

Then flash Sailfish over it

Flash succesful

But this is what I get after reboot... I have let it sit like that for the last 15 minutes.

The Following User Says Thank You to asa For This Useful Post:
Jedibeeftrix

m4r0v3r | # 246 | 2015-11-20, 09:23 | Report

Originally Posted by asa View Post

Yep. Tried it again, but no luck.

This is what I did
https://dl.dropboxusercontent.com/u/...28Small%29.jpg
First install CM11

https://dl.dropboxusercontent.com/u/...28Small%29.jpg
https://dl.dropboxusercontent.com/u/...28Small%29.jpg
Then flash Sailfish over it

https://dl.dropboxusercontent.com/u/...28Small%29.jpg
Flash succesful

https://dl.dropboxusercontent.com/u/...28Small%29.jpg
But this is what I get after reboot... I have let it sit like that for the last 15 minutes.

silly question, but when installing with Multirom you are using the multirom menu? And not just Installing a rom?

ie

clicking Advanced > Multirom etc etc

The Following User Says Thank You to m4r0v3r For This Useful Post:
asa

romu | # 247 | 2015-11-20, 09:44 | Report

Go with MultiRom, personaly, I never managed to run SFOS without it.

And following @m4r0v3r (damned id to type!) wrote, when your start your phone, you should see the MultiRom menu (with a red title bar) which lists all available OS on the phone. Does it happen?

The Following User Says Thank You to romu For This Useful Post:
asa

breiti_oi | # 248 | 2015-11-20, 12:32 | Report

@asa

I think you use an wrong CM11 Snapshot.
The wiki says you have use CM11 Snapshot M9, or M11, (which both work - i just tested it again

)
but your first screenshot shows you've installed Snapshot CNG3CAO3GO.

EDIT: and your Screenshots also show that you don't use multiboot, but that only matter's if you want you use an Android beside Sailfish.

Last edited by breiti_oi; 2015-11-20 at 12:37.

The Following User Says Thank You to breiti_oi For This Useful Post:
asa

asa | # 249 | 2015-11-20, 13:40 | Report

Thanks guys for your help! Much appreciated!

I'll try again with multiboot.

Edit.

Yeaah! Got it! I downloaded everything again and now it's up and running.

Look at it

So beatiful!

Thank you!

Last edited by asa; 2015-11-20 at 14:17.

The Following User Says Thank You to asa For This Useful Post:
eekkelund

salkos73 | # 250 | 2015-11-23, 06:50 | Report

I installed sailfish with multirom. How do I upgrade to version 2.0.0.10 sailfish? I know that via ota having multirom can't update.