deprecated | # 271 | 2016-11-28, 06:15 | Report

Hi BluesLee. I can't help you there, as I don't run sfdroid at all. I'm updating my system right now, OTA'ing from 2.0.4.14 to 2.0.5.6. I'll report back with any pertinent info regarding testing.

I will set up a test partition later and see if I can get sfdroid working on 2.0.5.6.

mautz | # 272 | 2016-11-28, 06:37 | Report

For me sfdroid is still working on my test installation...updating my main installation now.

Have you ried readding nemo to the net_bt_stack group?

UPDATE: sfdroid is still working after upgrade to 2.0.5.6.

---

Last edited by mautz; 2016-11-28 at 08:49.

deprecated | # 273 | 2016-11-28, 17:25 | Report

My first OTA to 2.0.5.6 broke my installation, as I didn't disable any repos or do what I was supposed to do. My fault! Anyway, this may be anecdotal, but now I'm on a "fresh" install (2.0.1.11 flash to 2.0.5.6 OTA directly) and I don't seem to have the notorious screen-on battery drain that we've been fighting since 2.0.2.x. At least nowhere near as bad. Whatever was updated must have fixed it.

Again, this could very well be conjecture, but through my testing I'm getting considerably less battery drain than before. I'm installing the latest mautz kernel and tweaking a bit. Will report findings. More to come!

abyzthomas | # 274 | 2016-11-28, 20:17 | Report

My new clean install on MultiROM displays "Android is starting -- Starting apps" for ever. Tried couple times, but same results.

mautz | # 275 | 2016-11-29, 12:44 | Report

Has anyone who is using my kernel v6 or v7 noticed slow charging?

I checked charging today and it did only charge with 270mA. I compiled a new kernel with the old fast charge option and now i get 1500mA.

Kernel v7 with old fast charge option can be downloaded here.

claustn | # 276 | 2016-11-29, 18:56 | Report

I'm using Sailfish 2.0.1.11 since a few days and now i have some questions:

-Is there a way to show the remaining characters while writing a sms?

-while surfing the web with the stock browser, keyboard becomes half-transparent when i need to fill some text-windows, can i disable it?

-i can't connect to wifi networks that use EAP/PEAP autentication, how i can manage wireless connection with username and password?

-sfdroid is working, is it possible to exchange files between it and SFOS? without using some kind of cloud or anything that's internet based.

Thank you!

claustn | # 277 | 2016-11-29, 20:34 | Report

I can't even email or upload files with sfdroid

deprecated | # 278 | 2016-11-30, 01:19 | Report

I'll address your points as they come to me (and as time permits!):

You can use wpa-supplicant via the command line to connect to EAP/PEAP networks, but a better workaround would be Roamer from OpenRepos. (https://openrepos.net/content/nodevel/roamer)

This is a GUI application that will allow you to create configs to connect to Enterprise wifi networks, WPA Enterprise, EAP/PEAP, etc.

I'll address the other points shortly. Thanks!

pichlo | # 279 | 2016-11-30, 06:33 | Report

That was (finally!) implemented in 2.0.2. In 2.0.1, you are stuck with this patch from Openrepos.

mautz | # 280 | 2016-11-30, 10:46 | Report

I ran into the same problem, when using the new 2.0.4.13 image. No problems when using 2.0.1.11 image and updating to 2.0.5.6.

@ deprecated

Do you use okboard or only the stock keyboard?

You can access the files and folders of sfdroid normally like it used to be on an android only device.

sdcard for example can be found at /storage/sdcard0. Maybe you need root priviliges to access the folders.

---

Last edited by mautz; 2016-11-30 at 10:53.