abyzthomas | # 361 | 2016-12-14, 17:13 | Report

There is a problem with 2.0.1.11 image with the phone call echoing at the call recipient end. Someone mentioned that 2.0.4.13 fixes this issue and from my limited use, I can kind confirm it is resolved. Now if someone knows and can tell us how we can apply that fix to 2.0.1.11 image or after installation, that would be great.

abyzthomas | # 362 | 2016-12-14, 17:20 | Report

Whatsapp works


Just follow the instructions on the first post.

Set RELEASE=2.0.5.6

claustn | # 363 | 2016-12-14, 17:27 | Report

Yes, but without notification in Sailfish, as he asked

mautz | # 364 | 2016-12-14, 19:06 | Report

Take a look here: https://talk.maemo.org/showpost.php?...&postcount=215

F0x123 | # 365 | 2016-12-14, 20:11 | Report

Yes I have seen that. But I am new in this topic so I do not know how to start/use that script. I think somehow with the terminal in SFOS.

minimec | # 366 | 2016-12-14, 21:48 | Report

I would establish a ssh connection with your computer. You can do this in >Settings>'Developer mode'. It makes the upgrade process much easier. You can then connect to the phone with 'ssh nemo@<phone_ip>'.

The upgrade process is not a script, but a chain of different terminal commands. I suggest that you did not yet enable some 'openrepos' repositories.

First... Make sure that 'zypper' is installed
Upgrade procedure

1. assign version to variable
2. put the device in release mode
3. Add the Nexus 5 'adaptation0' repository
4. delete/add/enable 'mw' repository (3 commands)
5. list repositories (check your changes)
6. clean/refresh database (2 commands)
7. start upgrade (That will take a long time. At least 1 hour or even more.)
At some point, the upgrade will stop and 'hang'. Probably at a package similar to 'sociald-onedrive-signon' or so. The upgrade should be more than 80% done (that is my experience). Remember that package name... (write it down somewhere) and abort the installation with 'CTRL+C'.

8. sync/reboot (2 commands). You may have to force shutdown with a 'long press' on the power button.
9. reinstall last package
10. continue with 'version --dup' / sync / reboot
The upgrade should now be complete. In case the store is not working, disable the 'adaptation0' repository and refresh the database...
Update: I changed the procedure to match the indications of the first post in this thread.

---

Last edited by minimec; 2016-12-14 at 23:00.

mautz | # 367 | 2016-12-14, 22:02 | Report

@ minimec

Nice guide!

The installation up to the crash at around 80% takes around 2 hours...you'll have to abort the installation yourself with 'CTRL+C'.

I always do a 'version --dup' again to install the missing packages, it only takes a few minutes.

mautz | # 368 | 2016-12-14, 22:04 | Report

I compiled a new kernel of the cyaonegnmod 12.1-CAF source.

Kernel boots, but lipstick doesn't start.

I get the following error message in journalctl:

Any ideas?

minimec | # 369 | 2016-12-14, 22:08 | Report

Yeah. I did that too, but had problems two times now. Last time was the upgrade to 2.0.5.6. It installed 'mesa-llvmpipe' and removed a lot of packages of the 'adaptation0' repository. I lost the whole lipstick GUI interface and had to debug...

Update: The problem I faced may be related to the fact, that I disabled the 'adaptation0' repository too early.

---

Last edited by minimec; 2016-12-14 at 23:07.

deprecated | # 370 | 2016-12-14, 22:15 | Report

I fixed echoing in the 2.0.1.11 image (old, original hardware adaptation - it is fixed in the 2.0.4.13 image) some time ago. I posted my solution in this thread:

http://talk.maemo.org/showpost.php?p...&postcount=215

With those fixes, it doesn't echo, and the microphone sounds great. Those edits aren't necessary in the newer hardware adaptation, but I guess you need it for sfdroid. Let me know if I can be of further assistance!