2.1.0/Iijoki EA - Page 29 - maemo.org

karlos devel | # 281 | 2017-06-05, 23:03 | Report

I recommend @mosen @coderus to solve this issue. These guys are good for this, I hope they help you. : )

Last edited by karlos devel; 2017-06-05 at 23:14.

The Following 2 Users Say Thank You to karlos devel For This Useful Post:
juiceme, mosen

mosen | # 282 | 2017-06-06, 14:31 | Report

Originally Posted by karlos devel View Post

I recommend @mosen @coderus to solve this issue. These guys are good for this, I hope they help you. : )

Thanks for the flowers, but i am mostly (successfully) guessing

Plus i am very bad in french.

Two observations @n950.

1) From your posted output i see you are running 2.1.0.10 and thus you get the persitant notification to update to 2.1.0.11 official release

2) There is no adaption1 repo on your device. I do not know if it is necessary but you tried to perform force update command "pkcon repo-set-data adaptation1 refresh-now true" on non exiting repo adaption1 which naturally fails then.
Maybe try force update on adaption0 repository and on all other faulty cached repos like described and already linked here?

Code:

pkcon repo-set-data adaptation0 refresh-now true

zypper and augeas lay in jolla repo so to install zypper first try

Code:

pkcon repo-set-data jolla refresh-now true

To update to 2.1.0.11 you need to set release corresponding and then update, but you already know:

Code:

ssu re 2.1.0.11
version --dup

Last edited by mosen; 2017-06-06 at 15:04.

The Following 3 Users Say Thank You to mosen For This Useful Post:
Feathers McGraw, juiceme, karlos devel

rasmarc | # 283 | 2017-06-06, 16:30 | Report

I can not help solving this - received my Jolla just one month ago. But I found a way to suppress update notifications in the events view:

In '/usr/share/lipstick-jolla-home-qt5/eventsview/EventsViewList.qml' the line

Code:

sourceModel: systemUpdateListModel.populated ? systemUpdateListModel : null

has to be commented out:

Code:

// sourceModel: systemUpdateListModel.populated ? systemUpdateListModel : null

In version 2.1.1.12 this is line number 271. It is necessary because when opening the store an update check is done.

UNDO BEFORE UPDATING.

Last edited by rasmarc; 2017-06-06 at 19:00. Reason: strange english

The Following 4 Users Say Thank You to rasmarc For This Useful Post:
Feathers McGraw, juiceme, karlos devel, mosen

n950 | # 284 | 2017-06-06, 21:48 | Report

Originally Posted by mosen View Post

Thanks for the flowers, but i am mostly (successfully) guessing

Plus i am very bad in french.

Two observations @n950.

1) From your posted output i see you are running 2.1.0.10 and thus you get the persitant notification to update to 2.1.0.11 official release

2) There is no adaption1 repo on your device. I do not know if it is necessary but you tried to perform force update command "pkcon repo-set-data adaptation1 refresh-now true" on non exiting repo adaption1 which naturally fails then.
Maybe try force update on adaption0 repository and on all other faulty cached repos like described and already linked here?

Code:

pkcon repo-set-data adaptation0 refresh-now true

zypper and augeas lay in jolla repo so to install zypper first try

Code:

pkcon repo-set-data jolla refresh-now true

To update to 2.1.0.11 you need to set release corresponding and then update, but you already know:

Code:

ssu re 2.1.0.11
version --dup

Code:

[root@Sailfish nemo]# pkcon repo-set-data adaptation0 refre
sh-now true
Mise en place des données
Attente dans la file
Attente de l'authentification
Attente dans la file
Démarrage
Requête
Démarrage
Exécution
Mise à jour de la liste des lo…
Erreur fatale: Can't access the given URL
[root@Sailfish nemo]# pkcon repo-set-data jolla refresh-now
true
Mise en place des données
Attente dans la file
Attente de l'authentification
Attente dans la file
Démarrage
Requête
Démarrage
Exécution
Mise à jour de la liste des lo…
Erreur fatale: Can't access the given URL
[root@Sailfish nemo]# ssu re 2.1.0.11
Changing release from 2.1.0.11 to 2.1.0.11
Your device is now in release mode!
[root@Sailfish nemo]# version --dup
REFRESHING CACHE AND DOWNLOADING PACKAGES
Refreshing: 0%
Message: adaptation0: [|] Failed to cache repo (127).
aliendalvik: [|] Failed to cache repo (127).
apps: [|] Failed to cache repo (127).
customer-jolla: [|] Failed to cache repo (127).
eas: [|] Failed to cache repo (127).
hotfixes: [|] Failed to cache repo (127).
jolla: [|] Failed to cache repo (127).
openrepos-BloodyFoxy: [|] Failed to cache repo (127).
openrepos-Schturman: [|] Failed to cache repo (127).
openrepos-Sfiet_Konstantin: [|] Failed to cache repo (127).
openrepos-basil: [|] Failed to cache repo (127).
store: [|] Failed to cache repo (127).
xt9: [|] Failed to cache repo (127).

Finished transaction (status=1, runtime=85298ms)
UPGRADING SYSTEM
Finished transaction (status=1, runtime=3202ms)
FINISHING

NO UPDATES FOUND. Try again later.

nothing work

even your first code i don't put here.

The Following 2 Users Say Thank You to n950 For This Useful Post:
juiceme, mosen

karlos devel | # 285 | 2017-06-07, 00:26 | Report

try " ssu status " need see someting

The Following User Says Thank You to karlos devel For This Useful Post:
juiceme

nieldk | # 286 | 2017-06-07, 06:21 | Report

Originally Posted by n950 View Post

Code:

[root@Sailfish nemo]# pkcon repo-set-data adaptation0 refre
sh-now true
Mise en place des données
Attente dans la file
Attente de l'authentification
Attente dans la file
Démarrage
Requête
Démarrage
Exécution
Mise à jour de la liste des lo…
Erreur fatale: Can't access the given URL
[root@Sailfish nemo]# pkcon repo-set-data jolla refresh-now
true
Mise en place des données
Attente dans la file
Attente de l'authentification
Attente dans la file
Démarrage
Requête
Démarrage
Exécution
Mise à jour de la liste des lo…
Erreur fatale: Can't access the given URL
[root@Sailfish nemo]# ssu re 2.1.0.11
Changing release from 2.1.0.11 to 2.1.0.11
Your device is now in release mode!
[root@Sailfish nemo]# version --dup
REFRESHING CACHE AND DOWNLOADING PACKAGES
Refreshing: 0%
Message: adaptation0: [|] Failed to cache repo (127).
aliendalvik: [|] Failed to cache repo (127).
apps: [|] Failed to cache repo (127).
customer-jolla: [|] Failed to cache repo (127).
eas: [|] Failed to cache repo (127).
hotfixes: [|] Failed to cache repo (127).
jolla: [|] Failed to cache repo (127).
openrepos-BloodyFoxy: [|] Failed to cache repo (127).
openrepos-Schturman: [|] Failed to cache repo (127).
openrepos-Sfiet_Konstantin: [|] Failed to cache repo (127).
openrepos-basil: [|] Failed to cache repo (127).
store: [|] Failed to cache repo (127).
xt9: [|] Failed to cache repo (127).

Finished transaction (status=1, runtime=85298ms)
UPGRADING SYSTEM
Finished transaction (status=1, runtime=3202ms)
FINISHING

NO UPDATES FOUND. Try again later.

nothing work

even your first code i don't put here.

Do you have an active Internet connection ?

The Following User Says Thank You to nieldk For This Useful Post:
juiceme

n950 | # 287 | 2017-06-07, 07:05 | Report

Originally Posted by karlos devel View Post

try " ssu status " need see someting

Code:

[nemo@Sailfish ~]$ devel-su
Password:
[root@Sailfish nemo]# ssu status
Device registration status: not registered
Device model: Jolla (SbJ / JP-1301)
Device UID: ***
Release: 2.1.0.11
Domain: sales
[root@Sailfish nemo]#

The Following User Says Thank You to n950 For This Useful Post:
juiceme

n950 | # 288 | 2017-06-07, 07:07 | Report

Originally Posted by nieldk View Post

Do you have an active Internet connection ?

Yes I have one.

The Following User Says Thank You to n950 For This Useful Post:
juiceme

meet.vino | # 289 | 2017-06-07, 07:35 | Report

How does one upgrade to the latest version of OS through zypper?

The Following User Says Thank You to meet.vino For This Useful Post:
juiceme

juiceme | # 290 | 2017-06-07, 08:25 | Report

Originally Posted by meet.vino View Post

How does one upgrade to the latest version of OS through zypper?

You don't.

The Following 2 Users Say Thank You to juiceme For This Useful Post:
mosen, pichlo