Active Topics
-
Phone Camera Competition April 2021: "Funny & Foolish" (34)
to General by nonsuch - 1 hr, 59 mins ago -
What's the best Handheld gnu/linux machine for 20XX? (78)
to Competitors by clort - 1 day, 1 hr ago -
Unofficial Storage for camera phone competition... (62)
to General by catbus - 1 day, 9 hrs ago -
Maemo-Leste pre-alpha announcement (512)
to Maemo 7 / Leste by nonsuch - 2 days, 10 hrs ago -
The Intel RealSense Smartphone prototype (0)
to Competitors by n950 - 2 days, 13 hrs ago -
Maemo Leste Playground (57)
to Maemo 7 / Leste by clort - 3 days, 10 hrs ago -
A Palm OS thread ... and a thank you to the community (23)
to Alternatives by bradvesp - 4 days, 9 hrs ago - more...
aspergerguy |
2017-07-13
, 13:07
|
|
Posts: 699 |
Thanked: 1,439 times |
Joined on Aug 2014
|
#11
|
Originally Posted by mike727
Was N9 flashed with or without SIM in place?
| The Following User Says Thank You to aspergerguy For This Useful Post: | ||
 |
|
2017-07-13
, 13:29
|
|
Posts: 70 |
Thanked: 142 times |
Joined on Aug 2015
@ Australia
|
#12
|
Originally Posted by aspergerguy
Originally without SIM. Attempted another flash solely with Chinese firmware, with SIM (carelessly? Is that bad?).
Was N9 flashed with or without SIM in place?
Flashing only Chinese without SIM also failed.
Terminal output mentions "Security Failure"?
Or could Australia firmware (minus CMT) be considered upgrade & it refuses to go back to China (considered downgrade)?
Last edited by mike727; 2017-07-13 at 13:41.
|
|
2017-07-13
, 19:54
|
|
Posts: 699 |
Thanked: 1,439 times |
Joined on Aug 2014
|
#13
|
Originally Posted by mike727
Trying to work out sequence of events here as from your pastebin output device was initially running Australian HARMATTAN_40.2012.21-3.299.1_PR_LEGACY_299_ARM_RM-696_PRD_signed.bin so when you tried DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958_ARM.bin it was disallowed as downgrade
Edit: Just tried to flash with only the Chinese firmware, which failed (with SIM).
You then forced Chinese CMT upon this version DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958_ARM.bin' --flash-only=cmt which was accepted
Perhaps going down a Legacy 005 route firmware might be accepted?
| The Following User Says Thank You to aspergerguy For This Useful Post: | ||
|
|
2017-07-13
, 23:15
|
|
Posts: 70 |
Thanked: 142 times |
Joined on Aug 2015
@ Australia
|
#14
|
Ouch, someone quick. If a Zerorize flash
Edit: Phone had 299 with '003 CMT'. I tried standard flashing 005 which failed, then Zerorize with 005 which also failed. https://pastebin.com/Lg1f3GkT
flasher -i works. Should I do cold flash?
I haven't disconnected or tried rebooting it.
Yesterday, originally (likely 003) the phone indicated 'Total Space' of ~64.06gb.
With 299 firmware, it indicated Total Space of ~6.38gb (no typo).
Edit2: When I try to flash, it outputs & stays at ">" & the "flashing bar".
Last edited by mike727; 2017-07-14 at 08:04.
flasher -f -F main.bin --erase-user-data=secure.... fails, is it bricked?
Edit: Phone had 299 with '003 CMT'. I tried standard flashing 005 which failed, then Zerorize with 005 which also failed. https://pastebin.com/Lg1f3GkT
flasher -i works. Should I do cold flash?
I haven't disconnected or tried rebooting it.
Yesterday, originally (likely 003) the phone indicated 'Total Space' of ~64.06gb.
With 299 firmware, it indicated Total Space of ~6.38gb (no typo).
Edit2: When I try to flash, it outputs & stays at ">" & the "flashing bar".
Last edited by mike727; 2017-07-14 at 08:04.
|
|
2017-07-14
, 11:49
|
|
Posts: 70 |
Thanked: 142 times |
Joined on Aug 2015
@ Australia
|
#15
|
Zerorize flash failed (due to downgrade). Phone refuses to attempt flash (basic & Zerorize). The flasher does Identify the phone (bootloader good?).
Anything I should try?
Reboot?
Anything I should try?
Reboot?
|
|
2017-07-14
, 12:19
|
|
Posts: 1,255 |
Thanked: 4,243 times |
Joined on Oct 2014
|
#16
|
Originally Posted by mike727
You are trying to downgrade:
Zerorize flash failed (due to downgrade). Phone refuses to attempt flash (basic & Zerorize). The flasher does Identify the phone (bootloader good?).
Anything I should try?
Reboot?
cmt 003 is Chinese variant once you have flashed chinense cmt, you cannot change it back to western version, 003 can only be updated with 003.
You can try to flash
DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958
(find it here https://talk.maemo.org/showthread.php?t=96401)
flasher -F 003version.bin --flash-only=cmt -f -R
__________________
You can still support my work by donation - click here
ETH: 0xFcD031609DB739C62730589361940C68ceEbC913
You can still support my work by donation - click here
ETH: 0xFcD031609DB739C62730589361940C68ceEbC913
| The Following User Says Thank You to nieldk For This Useful Post: | ||
|
|
2017-07-14
, 12:40
|
|
Posts: 699 |
Thanked: 1,439 times |
Joined on Aug 2014
|
#17
|
Thought he had tried previously with this:
Last edited by aspergerguy; 2017-07-14 at 12:41. Reason: Amendment
HTML Code:
michael@michael-G41MT-ES2L ~ $ sudo flasher -f -F '/home/michael/Desktop/DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958_ARM.bin' --flash-only=cmt
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
USB device found at bus 001, device address 006.
Device identifier: 351669050171237 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003
Image cert-sw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped
Battery level 84 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[x] cmt-mcusw [finished 100 % 6050 / 6050 kB 3087 kB/s]
Success
Last edited by aspergerguy; 2017-07-14 at 12:41. Reason: Amendment
| The Following User Says Thank You to aspergerguy For This Useful Post: | ||
|
|
2017-07-14
, 12:59
|
|
Posts: 70 |
Thanked: 142 times |
Joined on Aug 2015
@ Australia
|
#18
|
Originally Posted by nieldk
Thanks, feel relieved now that it's booted.
You are trying to downgrade:
cmt 003 is Chinese variant once you have flashed chinense cmt, you cannot change it back to western version, 003 can only be updated with 003.
You can try to flash
DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958
(find it here https://talk.maemo.org/showthread.php?t=96401)
flasher -F 003version.bin --flash-only=cmt -f -R
So it is now 299 & 003 (CMT).
IMEI is present.
It indicates total storage as 6.28 GB
Error message; "Can't access user data"
Application data is unavailable (it says "in mass storage mode"; while unplugged).
So, combination of 299 & 003 doesn't work?
Solely flashing 003 is not possible, since it's downgrade..
Should I try finding New Zealand firmware?
Can I only use 335, 341, 420 .....?
Edit: Phone is supposed to be 64 GB
Btw, some of those links to firmware are dead.
Last edited by mike727; 2017-07-14 at 13:14.
|
|
2017-07-14
, 22:59
|
|
Posts: 699 |
Thanked: 1,439 times |
Joined on Aug 2014
|
#19
|
[QUOTE=mike727;1530655]Thanks, feel relieved now that it's booted.
So it is now 299 & 003 (CMT).
IMEI is present.
It indicates total storage as 6.28 GB
Error message; "Can't access user data"QUOTE]
You would need to cold flash to re-write partitions once you have identified a firmware version:http://talk.maemo.org/showpost.php?p...postcount=1512
There is no separate New Zealand firmware as 299 is country variant Australia and of course you have tried DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin
As regards your highlighted firmwares, please note the following if helps to make an assessment:
059L6B8,335,N9 RM-696 Country Variant United Arab Emirates AE CLI8 Black 16G,7088057028,DFL61_HARMATTAN_40.2012.21-3.335.1_PR_LEGACY_335_ARM_RM-696_PRD_signed.bin
059L7Z9,341,N9 RM-696 PTK Centertel (Orange PL) PL Black V2 - MR,7149480848,DFL61_HARMATTAN_40.2012.21-3.341.2_PR_LEGACY_341_ARM_RM-696_PRD_signed.bin
059L449,420,N9 RM-696 Telcel MX MX Black V3,7146675574,DFL61_HARMATTAN_40.2012.21-3.420.4_PR_LEGACY_420_ARM_RM-696_PRD_signed.bin
059N2D9,468,N9 RM-696 Country Variant United Arab Emirates AE N9 UAE White -,7087361817,DFL61_HARMATTAN_40.2012.21-3.468.1_PR_LEGACY_468_ARM_RM-696_PRD_signed.bin
The following is last resort as highest number available with no going back.
059L5D4,480,N9 RM-696 Country Variant Switzerland CH Black 64GB V1,7099600534,DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
So it is now 299 & 003 (CMT).
IMEI is present.
It indicates total storage as 6.28 GB
Error message; "Can't access user data"QUOTE]
You would need to cold flash to re-write partitions once you have identified a firmware version:http://talk.maemo.org/showpost.php?p...postcount=1512
There is no separate New Zealand firmware as 299 is country variant Australia and of course you have tried DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin
As regards your highlighted firmwares, please note the following if helps to make an assessment:
059L6B8,335,N9 RM-696 Country Variant United Arab Emirates AE CLI8 Black 16G,7088057028,DFL61_HARMATTAN_40.2012.21-3.335.1_PR_LEGACY_335_ARM_RM-696_PRD_signed.bin
059L7Z9,341,N9 RM-696 PTK Centertel (Orange PL) PL Black V2 - MR,7149480848,DFL61_HARMATTAN_40.2012.21-3.341.2_PR_LEGACY_341_ARM_RM-696_PRD_signed.bin
059L449,420,N9 RM-696 Telcel MX MX Black V3,7146675574,DFL61_HARMATTAN_40.2012.21-3.420.4_PR_LEGACY_420_ARM_RM-696_PRD_signed.bin
059N2D9,468,N9 RM-696 Country Variant United Arab Emirates AE N9 UAE White -,7087361817,DFL61_HARMATTAN_40.2012.21-3.468.1_PR_LEGACY_468_ARM_RM-696_PRD_signed.bin
The following is last resort as highest number available with no going back.
059L5D4,480,N9 RM-696 Country Variant Switzerland CH Black 64GB V1,7099600534,DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
| The Following User Says Thank You to aspergerguy For This Useful Post: | ||
 |
| Tags |
| flashing n9, sim card |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
All times are GMT. The time now is 06:15.