r0kk3rz | # 81 | 2018-11-27, 08:50 | Report

If you're getting to fastboot mode then you're doing it way too early.

The procedure is:
Power on > wait for purple led > hammer vol key (up or down) a few times.

Note this will only work when the aosp boot.img is flashed, because the required bits aren't in the sailfish boot.img

monkeyisland | # 82 | 2019-02-01, 16:17 | Report

So i tested to install SailfishOS like here discribed:


successfully flash the AOSP images, but when trying to flash the twrp in the fotakernel i get:
FAILED (remote: Command not allowed)

so i test:

fastboot -s 256M flash recovery twrp-3.0.2-0-scorpion_windy.img

every thing goes fine...

then followed the instructions..

all okay.

So the problem, the tablet wont shutdown correctly.
The screen is black but red light is on.

Only with the power button long press is working.

any hints?

so i see i buyed the sgp 612 (32 GB) is this the Problem?

---

Last edited by monkeyisland; 2019-02-01 at 16:59.

r0kk3rz | # 83 | 2019-02-02, 10:10 | Report

so you have successfully installed sailfish os and it works ok?

with the shutdown, it does take quite some time but it will eventually do it, at least that is how it operates on my tablet

monkeyisland | # 84 | 2019-02-02, 13:03 | Report

Yes it is working but it shows only 10 GB from 16 GB evtl.
The tablet is a 32 GB Device.
Shutdown dont work i leave it 1 minute only red light is on.

r0kk3rz | # 85 | 2019-02-02, 13:53 | Report

yeah for me its more like 5min, not sure how to debug that particular issue

monkeyisland | # 86 | 2019-02-02, 14:54 | Report

okay.. thats a pity.
Have you advice for me ho to use the hole memory so 32 GB?

monkeyisland | # 87 | 2019-02-02, 15:22 | Report

So i tested when airplane mode is active, so no connections. The tablet switch off after 2 minutes.
So there is possibly a chance to fix?

GCR | # 88 | 2019-02-03, 14:12 | Report

Hello,

Is it possible (or safe) to upgrade tablet to 3.0.1.14 (ssu release 3.0.1.14, version -dup)?

Thanks for your reply

r0kk3rz | # 89 | 2019-02-03, 17:45 | Report

3.0.1.11 is the version to use, and everything updated fine for me so it seems safe

monkeyisland | # 90 | 2019-02-03, 17:46 | Report

I tested :3.0.0.8 =

I tested sensors wont work, etc. : Display rotating not working.

---

Last edited by monkeyisland; 2019-02-03 at 17:53.