Nokia N9 stuck at bootloop, can't flash with Flasher, Phoenix can't flash, help! - maemo.org

Active Topics

Nokia FW servers dead (129)
to MeeGo / Harmattan by tvandorffy - 7 hrs, 56 mins ago
Maemo.org user login (5)
to General by Maemish - 9 hrs, 9 mins ago
How to force MMS to use cellular network for data? (3)
to SailfishOS by pichlo - 10 hrs, 46 mins ago
Crash/poweroff after entering SIM PIN (7)
to Nokia N9 / N950 by pichlo - 10 hrs, 58 mins ago
Phone Camera Competition May 2021: "spring is here" (3)
to General by robthebold - 3 days ago
Not clickbait "NOKIA STILL MAKING PHONES, BUT FOR INDUSTRIAL USES" (3)
to Competitors by biketool - 4 days, 4 hrs ago
Phone Camera Competition April 2021: "Funny & Foolish" (38)
to General by peterleinchen - 4 days, 14 hrs ago
A Palm OS thread ... and a thank you to the community (24)
to Alternatives by meemorph - 5 days, 10 hrs ago
MeeGo v1.2.0.1x for Netbook (0)
to MeeGo / Harmattan by teroyk - 5 days, 10 hrs ago
more...

Page 1 of 2

Next >

Thread Tools

WunderWungiel	2021-04-10 , 10:56
Posts: 7 \| Thanked: 8 times \| Joined on Apr 2021	#1

Hello

I bought Nokia N9 that was stuck at bootloop, and tried to fix it.
It was stuck at Nokia logo. I downloaded MeeGo Flasher and firmware. I tried to flash with command:

Code:

flasher -F main.bin -f

But it stucks at rootfs with 32768 bytes (NA flash speed). I disconnected and tried again, the same error. I trie many times with many firmwares, but any of they works. Usually error "Downgrade is not allowed". When I try to flash with the first firmware, there is error:

Code:

flasher -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -f                                                    
[sudo] hasło użytkownika wunderwungiel: 
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 016.
Device identifier: 357923041561749 (SN: N/A)
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.341.2_PR_341
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 28847 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 017.
Device identifier: 357923041561749 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_009
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 64 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init         0 %       0 /       0 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init         0 %       1 /       1 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1352745255)
[Pipe   0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

And there is a warning on phone:
"Warning, software is changed bla bla bla"
Please, help!

Quote & Reply |

The Following User Says Thank You to WunderWungiel For This Useful Post:
juiceme

aspergerguy	2021-04-10 , 13:28
Posts: 702 \| Thanked: 1,444 times \| Joined on Aug 2014	#2

Originally Posted by WunderWungiel

Fetching error list:
========================================
Downgrade disallowed (1352745255)
[Pipe 0] Finishing in error state with status 10
========================================

Unfortunately you haven't found a new enough image yet and similar problem can be found in this thread:https://talk.maemo.org/showpost.php?...10&postcount=7

Have you tried this Swiss one (480), which is usually final option available?
https://talk.maemo.org/showpost.php?p=1544436

Quote & Reply |

The Following User Says Thank You to aspergerguy For This Useful Post:
juiceme

WunderWungiel	2021-04-10 , 13:59
Posts: 7 \| Thanked: 8 times \| Joined on Apr 2021	#3

No, i haven't tried. I'm downloading now

Thanks for help, I will try
Does this firmware have Polish and English language?
I'm Polish

And sorry for my bad English

Quote & Reply |

The Following User Says Thank You to WunderWungiel For This Useful Post:
juiceme

aspergerguy	2021-04-10 , 14:07
Posts: 702 \| Thanked: 1,444 times \| Joined on Aug 2014	#4

Originally Posted by WunderWungiel

Does this firmware have Polish and English language?

Unfortunately no Polish, English, German & French certainly. No apologies necessary, your English is fine.

Quote & Reply |

The Following User Says Thank You to aspergerguy For This Useful Post:
juiceme

WunderWungiel	2021-04-10 , 14:41
Posts: 7 \| Thanked: 8 times \| Joined on Apr 2021	#5

Oh, it's a pity there is no english language. What are they? Really no English? After all, even in Chinese ROMs on Android there is English

Quote & Reply |

The Following User Says Thank You to WunderWungiel For This Useful Post:
juiceme

aspergerguy	2021-04-10 , 14:54
Posts: 702 \| Thanked: 1,444 times \| Joined on Aug 2014	#6

Sorry my bad, English is included but no Polish.

HTML Code:

iMac:Harmattan adrian$ flasher -f -F 3290ADCC_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 20, device address 13.
Device serial number is N/A
Error claiming USB interface: Operation timed out
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.232.05.2_PR_232
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 43312 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 20, device address 14.
Device serial number is N/A
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_480
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 63 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[x] cert-sw      [finished   100 %       1 /       1 kB      NA     ]
[x] cmt-2nd      [finished   100 %      95 /      95 kB      NA     ]
[x] cmt-algo     [finished   100 %     789 /     789 kB      NA     ]
[x] cmt-mcusw    [finished   100 %    6050 /    6050 kB    3047 kB/s]
[x] xloader      [finished   100 %      23 /      23 kB      NA     ]
[x] secondary    [finished   100 %      94 /      94 kB      NA     ]
[x] kernel       [finished   100 %    2714 /    2714 kB    1824 kB/s]
[x] rootfs       [finished   100 % 1170393 / 1170393 kB   11110 kB/s]
Updating SW release
Success

Last edited by aspergerguy; 2021-04-10 at 18:00. Reason: Addition

Quote & Reply |

The Following User Says Thank You to aspergerguy For This Useful Post:
juiceme

WunderWungiel	2021-04-10 , 15:00
Posts: 7 \| Thanked: 8 times \| Joined on Apr 2021	#7

Oh, so great

I will try in 24 h
Thanks for help, love this forum

Quote & Reply |

The Following User Says Thank You to WunderWungiel For This Useful Post:
juiceme

WunderWungiel	2021-04-11 , 05:03
Posts: 7 \| Thanked: 8 times \| Joined on Apr 2021	#8

I have one question. Is it for version 16 GB?
I have N9 16 GB, product code: 059L7Z9
Compatible?

Quote & Reply |

The Following User Says Thank You to WunderWungiel For This Useful Post:
juiceme

aspergerguy	2021-04-11 , 17:26
Posts: 702 \| Thanked: 1,444 times \| Joined on Aug 2014	#9

Originally Posted by WunderWungiel

I have one question. Is it for version 16 GB?
I have N9 16 GB, product code: 059L7Z9
Compatible?

In above example of flashing this version of firmware I used it upon 059L5D1 which is Country Variant Switzerland CH Magenta 16GB V1_COLOR, if this helps.

Quote & Reply |

The Following User Says Thank You to aspergerguy For This Useful Post:
juiceme

WunderWungiel	2021-04-12 , 05:17
Posts: 7 \| Thanked: 8 times \| Joined on Apr 2021	#10

The same error

Code:

flasher -F 3290ADCC_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin -f
flasher 3.12.1 (Oct  5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 002, device address 005.
Device identifier: 357923041561749 (SN: N/A)
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.341.2_PR_341
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 29720 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 002, device address 006.
Device identifier: 357923041561749 (SN: N/A)
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_480
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped

Battery level 61 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init         0 %       0 /       0 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init         0 %       1 /       1 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1352745255)
[Pipe   0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images

How to fix it? I think it is error of the phone, not software.
There isn't status progress on the phone, too

How do you think?
Maybe corrupted bootloader?
I don't know