Active Topics
-
HDMI with Leste (1)
to Maemo 7 / Leste by teroyk - 2 days, 17 hrs ago -
Firefox with Leste (9)
to Maemo 7 / Leste by teroyk - 4 days, 18 hrs ago - more...
aspergerguy |
2021-04-12
, 16:51
|
|
Posts: 804 |
Thanked: 1,586 times |
Joined on Aug 2014
|
#121
|
Originally Posted by XOleg
Unfortunately neither suitable as trying to apply Swiss DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin is regarded as "downgrade" by existing DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420
| The Following User Says Thank You to aspergerguy For This Useful Post: | ||
|
|
2021-04-12
, 18:58
|
|
Posts: 1,290 |
Thanked: 4,319 times |
Joined on Oct 2014
|
#122
|
Originally Posted by aspergerguy
You might want to try either DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958 or DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958 or DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958 from the first post.
Unfortunately neither suitable as trying to apply Swiss DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin is regarded as "downgrade" by existing DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420
One of then should work, depending of your variant (001, 003, 005, 006) guessing yours is higher than variant 001 as that didnt work.
It IS possible to downgrade. By replacing the certs, as the device does have a history of previously versions. But, success depends on whats on the ‘cache’ (simple said), and replacing those certs is not that easy. I did it once , but honestly, cant remember the complete steps. The tools needed and a rough deskription is in another thread somewhere on downgrading.
So, try different variants first. Just not China ones
__________________
You can still support my work by donation - click here
You can still support my work by donation - click here
Last edited by nieldk; 2021-04-12 at 19:04.
| The Following 2 Users Say Thank You to nieldk For This Useful Post: | ||
|
|
2021-04-13
, 17:14
|
|
Posts: 804 |
Thanked: 1,586 times |
Joined on Aug 2014
|
#123
|
Originally Posted by nieldk
Thanks for the info. but unfortunately all failed:
You might want to try either DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958 or DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958 or DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958 from the first post.
One of then should work, depending of your variant (001, 003, 005, 006) guessing yours is higher than variant 001 as that didnt work.
So, try different variants first. Just not China ones
Code:
iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_003-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 20, device address 10.
Device serial number is N/A
Error claiming USB interface: Operation timed out
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 40551 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 20, device address 11.
Device serial number is N/A
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_003
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Charging battery, 10 % battery level (11 % required). Ctrl-c to exit
Battery level 11 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure
image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Progress bar initialization failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1355302068)
[Pipe 0] Finishing in error state with status 10
========================================
ERROR: Failed to flash images
iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 20, device address 13.
Device serial number is N/A
Error claiming USB interface: Operation timed out
Sending request 0x01 failed: Operation timed out
NOLO_REQ_GET_STATUS: Operation timed out
ERROR: Device status query failed
iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_005-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 20, device address 15.
Device serial number is N/A
Error claiming USB interface: Operation timed out
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 41500 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 20, device address 16.
Device serial number is N/A
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_005
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Battery level 16 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure
image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Progress bar initialization failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1355302068)
[Pipe 0] Finishing in error state with status 10
========================================
ERROR: Failed to flash images
iMac:Harmattan adrian$ flasher -f -F DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_006-OEM1-958_ARM.bin
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.
Suitable USB interface (bootloader/phonet) not found, waiting...
USB device found at bus 20, device address 18.
Device serial number is N/A
Error claiming USB interface: Operation timed out
Found device RM-696, hardware revision 1507
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.420.4_PR_420
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 40321 kB/s)
Suitable USB interface (phonet) not found, waiting...
USB device found at bus 20, device address 19.
Device serial number is N/A
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1507
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3_PR_006
Image moslo not present
Image mmc not present
Image tar skipped
Image config skipped
Battery level 15 %, continuing.
image [state progress transfer flash speed]
---------------------------------------------------------------------
[_] cert-sw [init 0 % 0 / 0 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure
image [state progress transfer flash speed]
---------------------------------------------------------------------
[f] cert-sw [init 0 % 1 / 1 kB NA ]
[ ] cmt-2nd [pending 0 % 0 / 0 kB NA ]
[ ] cmt-algo [pending 0 % 0 / 0 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[ ] xloader [pending 0 % 0 / 0 kB NA ]
[ ] secondary [pending 0 % 0 / 0 kB NA ]
[ ] kernel [pending 0 % 0 / 0 kB NA ]
[ ] rootfs [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Progress bar initialization failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1355302068)
[Pipe 0] Finishing in error state with status 10
========================================
https://talk.maemo.org/showpost.php?...7&postcount=67
Last edited by aspergerguy; 2021-04-13 at 17:27.
|
|
2021-04-13
, 18:15
|
|
Posts: 1,290 |
Thanked: 4,319 times |
Joined on Oct 2014
|
#124
|
Originally Posted by aspergerguy
Ah yes. True, i guessed there were a reason why it left my mind. Well, sadly that leaves downgrading near impossible (unless you want to take the device apart, and hook up the flashchip to a programmer)
P.S. Found thread to which you were referring to although Nokia's servers went down at the time you were researching this issue:
https://talk.maemo.org/showpost.php?...7&postcount=67
__________________
You can still support my work by donation - click here
You can still support my work by donation - click here
| The Following User Says Thank You to nieldk For This Useful Post: | ||
|
|
2021-05-05
, 14:19
|
|
Posts: 28 |
Thanked: 41 times |
Joined on Mar 2021
|
#125
|
Hi guys,
I am considering buying a Nokia N9 phone.
I asked the seller to send me the firmware version,
but I am not sure about the result. :-)
What I am trying to determine that if this is Chinese firmware or not as I would not want to buy a phone with that.
Could you please help me to determine which region is the firmware from? I think it is not Chinese and it is a branded firmware.
Also is this the latest version available?
That's all I know for now.
The firmware version is: V40.2012.21-3.339.2_PR_339
Thanks a lot for the help!
Tamas
Last edited by tvandorffy; 2021-05-05 at 14:32. Reason: Just adding one more question.
I am considering buying a Nokia N9 phone.
I asked the seller to send me the firmware version,
but I am not sure about the result. :-)
What I am trying to determine that if this is Chinese firmware or not as I would not want to buy a phone with that.
Could you please help me to determine which region is the firmware from? I think it is not Chinese and it is a branded firmware.
Also is this the latest version available?
That's all I know for now.
The firmware version is: V40.2012.21-3.339.2_PR_339
Thanks a lot for the help!
Tamas
Last edited by tvandorffy; 2021-05-05 at 14:32. Reason: Just adding one more question.
| The Following User Says Thank You to tvandorffy For This Useful Post: | ||
|
|
2021-05-05
, 16:54
|
|
Posts: 804 |
Thanked: 1,586 times |
Joined on Aug 2014
|
#126
|
Hi,
Hope you have put device on charge by now looking at photo. Your N9 should be 059L7S2: N9 RM-696 Country Variant Sweden SE Black 16GB and firmware DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin
Source of reference is this thread: https://www.mcrf.ru/forum/showthread.php?t=32960 and is the latest firmware available.
Hope you have put device on charge by now looking at photo. Your N9 should be 059L7S2: N9 RM-696 Country Variant Sweden SE Black 16GB and firmware DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin
Source of reference is this thread: https://www.mcrf.ru/forum/showthread.php?t=32960 and is the latest firmware available.
| The Following 2 Users Say Thank You to aspergerguy For This Useful Post: | ||
|
|
2021-05-05
, 18:48
|
|
Posts: 28 |
Thanked: 41 times |
Joined on Mar 2021
|
#127
|
Hi Aspergerguy,
Actually, this phone is not mine: yet.
The photo is from eBay, I kindly asked the seller to take a photo of the software version screen. (In the end, I have bought it before your response, I was not able to resist.)
But I will do charge it once it arrives. :-)
Thanks for your response!
(I am really happy that it has European firmware and it is the last available version.)
Tamas
Actually, this phone is not mine: yet.
The photo is from eBay, I kindly asked the seller to take a photo of the software version screen. (In the end, I have bought it before your response, I was not able to resist.)
But I will do charge it once it arrives. :-)
Thanks for your response!
(I am really happy that it has European firmware and it is the last available version.)
Tamas
| The Following User Says Thank You to tvandorffy For This Useful Post: | ||
|
|
2021-05-06
, 05:28
|
|
Posts: 28 |
Thanked: 41 times |
Joined on Mar 2021
|
#128
|
Hi aspergerguy,
I am reading in the forum that if I want to use the repomirror package, I might need to reflash my device.
You mentioned the file DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin
May I use this link from this thread's first post if I really need to reflash my device? (The last firmware link called, "A0E9827F_DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin
D6C9C818_DFL61_HARMATTAN_40.2012.21-3.339.1_EMMC_339.bin")
https://1drv.ms/f/s!Ars13Tv5L15qjddx76WEm7jvkeeqiQ
Or is it may be possible to dump the current firmware from the phone itself?
Sorry for the noob question, but I am really anxious not to screw up the phone by flashing something inappropriate.
Thanks a lot,
Tamas
Last edited by tvandorffy; 2021-05-06 at 08:35. Reason: Grammar...
I am reading in the forum that if I want to use the repomirror package, I might need to reflash my device.
You mentioned the file DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin
May I use this link from this thread's first post if I really need to reflash my device? (The last firmware link called, "A0E9827F_DFL61_HARMATTAN_40.2012.21-3.339.2_PR_LEGACY_339_ARM_RM-696_PRD_signed.bin
D6C9C818_DFL61_HARMATTAN_40.2012.21-3.339.1_EMMC_339.bin")
https://1drv.ms/f/s!Ars13Tv5L15qjddx76WEm7jvkeeqiQ
Or is it may be possible to dump the current firmware from the phone itself?
Sorry for the noob question, but I am really anxious not to screw up the phone by flashing something inappropriate.
Thanks a lot,
Tamas
Last edited by tvandorffy; 2021-05-06 at 08:35. Reason: Grammar...
|
|
2021-05-06
, 13:56
|
|
Posts: 804 |
Thanked: 1,586 times |
Joined on Aug 2014
|
#129
|
[QUOTE=tvandorffy;1571719]I am reading in the forum that if I want to use the repomirror package, I might need to reflash my device./QUOTE]
Remember that you would need to send N9 Repomirror to device by Bluetooth from another device as N9 browser certificates now expired and in Settings > Applications > Installations > Allow installations from non-Store sources:
https://openrepos.net/content/ancelad/n9-repomirror
Try first without re-flashing firmware.
Remember that you would need to send N9 Repomirror to device by Bluetooth from another device as N9 browser certificates now expired and in Settings > Applications > Installations > Allow installations from non-Store sources:
https://openrepos.net/content/ancelad/n9-repomirror
Try first without re-flashing firmware.
| The Following 3 Users Say Thank You to aspergerguy For This Useful Post: | ||
|
|
2021-05-06
, 14:02
|
|
Posts: 28 |
Thanked: 41 times |
Joined on Mar 2021
|
#130
|
Hi aspergerguy,
Thank you, I will do that first.
I would want to avoid flashing if possible as the device already has the latest version. (I did flash several of my devices, android phones, my Nokia N8 in the past, so I think I probably would be able to do this as well. But I need to know for sure which flash file that I can download is good for my device.)
Kind regards,
Tamas
Last edited by tvandorffy; 2021-05-06 at 15:18.
Thank you, I will do that first.
I would want to avoid flashing if possible as the device already has the latest version. (I did flash several of my devices, android phones, my Nokia N8 in the past, so I think I probably would be able to do this as well. But I need to know for sure which flash file that I can download is good for my device.)
Kind regards,
Tamas
Last edited by tvandorffy; 2021-05-06 at 15:18.
 |
| Tags |
| mrcrab, n9 firmware, navifirm |
«
Previous Thread
|
Next Thread
»
|
All times are GMT. The time now is 12:07.