Just released 4.2.0.21 update. See description at FSO: https://forum.sailfishos.org/t/xperi...1-release/8351

No fimage file? How would that work if flashing from Android?

Flashing from Android is not supported, you are expected to flash via PC. As fimage use was limited, I did not invest time into looking how to ensure reconfigured storage LVM layout in it. Instead, I decided to reduce download size together with the flashed image size for a feature that has very limited use.

Sorry - I wasn't clear ... I meant flashing from PC, (or whatever - personally, I do flash from Android and it works fine), but not alreasy having Sailfish installed. I assumed that the fImage file was a necessary partition, ("system"). So, are you saying that whatever files would be in the fImage have been incorporated into Sailfish img?

Windows PowerShell
Copyright (C) Microsoft Corporation. Alle Rechte vorbehalten.

Lernen Sie das neue plattformübergreifende PowerShell kennen – https://aka.ms/pscore6

PS C:\Users\joe> cd Downloads/SFOS42XZ3/SAilf*
PS C:\Users\joe\Downloads\SFOS42XZ3\Sailfish_OS-4.2.0.21-h9436-0.4.0.1> ./fastboot getvar current-slot
current-slot: a
Finished. Total time: 0.016s
PS C:\Users\joe\Downloads\SFOS42XZ3\Sailfish_OS-4.2.0.21-h9436-0.4.0.1> ./flash-on-windows.bat

This is a Windows flashing script for Sony Xperia 10 device.

Power on the device in fastboot mode, by doing the following:
1. Turn off your Xperia.
2. Connect one end of a USB cable to your PC.
3. While holding the volume up button pressed, connect the other end of
the USB cable to your Xperia.
4. After this you should see the blue LED lit on Xperia, and it will be
ready for flashing

Drücken Sie eine beliebige Taste . . .
Verifying MD5 checksums...
MD5SUM 'b559b4467e1e0eb2d09241c139a573d7' match for file 'flash-on-windows.bat'.

Searching for a compatible device...

SW_binaries_for_Xperia_Android_10.0.7.1_r1_v12a_ta ma.img

I tried to flash 4.2 on my XZ3 and for some reason I get the following message:



It's searching forever ...
Any idea? Device is unlocked, fastboot is working fine, the blue light is lit ...

Could it be that I am using the wrong software binaries? I downloaded and unzipped

Check device manager - what device pops uo when you connect with fastboot?

echo "Searching device to flash.."
IFS=$'\n'
FASTBOOTCMD_NO_DEVICE="${FASTBOOT_BIN_PATH}${FASTB OOT_BIN_NAME}"

FASTBOOT_DEVICES=$($FASTBOOTCMD_NO_DEVICE devices |cut -d$'\t' -f1)

if [ -z "$FASTBOOT_DEVICES" ]; then
echo "No device that can be flashed found. Please connect your device in fastboot mode before running this script."
exit 1
fi

SERIALNUMBERS=
count=0
for SERIALNO in $FASTBOOT_DEVICES; do
PRODUCT=$($FASTBOOTCMD_NO_DEVICE -s $SERIALNO getvar product 2>&1 | head -n1 | cut -d ' ' -f2)
BASEBAND=$($FASTBOOTCMD_NO_DEVICE -s $SERIALNO getvar version-baseband 2>&1 | head -n1 | cut -d ' ' -f2)
BOOTLOADER=$($FASTBOOTCMD_NO_DEVICE -s $SERIALNO getvar version-bootloader 2>&1 | head -n1 | cut -d ' ' -f2)

echo "Found $PRODUCT, baseband:$BASEBAND, bootloader:$BOOTLOADER"

if [ ! -z "$(echo $PRODUCT | grep -e "H9436" -e "H9436")" ]; then
SERIALNUMBERS="$SERIALNO $SERIALNUMBERS"
((++count))
fi
done
IFS=" "

echo "Found $count devices: $SERIALNUMBERS"

I tried two different drivers (on two different computers, i.e. on each computer I tried both drivers):

Sony sa0119adb.inf

and

Sony sa0114adb.inf

Fastboot is working in general. Therefore the first part of the batch commands are fine.

It is stuck somewhere here: