leavic | # 1 | 2008-03-27, 12:26 | Report

I tried to setup my voipdiscount account with the following information on my n800:
http://www.voipdiscount.com/en/sipp.html

But it failed to connect to the SIP network when I tried to dial up.Anybody knows how to set it up correctly?

luca | # 2 | 2008-03-27, 18:04 | Report

It should be the same config as voipbuster, search voipbuster in this forum for guidance and ilbc problems.

confini | # 3 | 2008-03-27, 19:36 | Report

Hi,
I use VOIP with voipstunt and another account, both active and good working, on my N800. I am using RTCOMM (search google for rtcomm maemo, first hit), and as in post #2 fix the ilbc problem (easy forum search).

I post here my voipstunt account configuration, maybe can be useful:

user name: YOURNAME @ voipstunt.com
passws: yours
checked "use for PSTN calls"
ADVANCED:
- Connection:
Transport: Auto
Outgoing proxy: sip.voipstunt.com
Port 5060
"Discover.." checked, Keep-alive auto, keep-alive frequency 0
-Authentication:
Just your ID and pass, without any @voipstunt.com
-Stun:
no autodetect STUN, use "stun.voipstunt.com" as server, port 3478.

I hope it will work also for you, all the best,

Nicola

ghoonk | # 4 | 2008-03-27, 23:03 | Report

Please, start by reading the Wiki -- http://www.internettablettalk.com/wi...#Communication

And obviously, you didn't bother to search either :P

http://www.internettablettalk.com/fo...archid=1542500

leavic | # 5 | 2008-03-28, 02:26 | Report

Thank you everybody(especially confini),it works now!

ghoonk | # 6 | 2008-03-28, 08:05 | Report

You might want to check that this workaround (it's not a fix) does not disable Gizmo/Skype calling. I'm looking into this now as my Gizmo/Skype is not playing nice without the iLBC codec enabled :P

ghoonk | # 7 | 2008-03-28, 11:13 | Report

Update: Skype works, Voipbuster works, Gizmo does not. As expected

ejasons | # 8 | 2008-03-28, 23:40 | Report

I didn't have much trouble setting up the account, and I can call (once I noticed that I had to add a "1" before the phone number).

However, when answer the call, there is no sound going in either direction. Googling "VOIP no sound" turned up some hits that made it sound like I am perhaps just not understanding how VOIP with SIP is supposed to work.

I also tried using "Linphone" on Linux, with the same effect -- dialing "15551234567@sip.voipdiscount.com" resulted in the call going through, but with no sounds...

What might I be missing?

ghoonk | # 9 | 2008-03-30, 05:13 | Report

Do you happen to have the OGG Support (allows you to playback OGG files on the tablet) installed? If so, that's been known to cause audio issues.

ejasons | # 10 | 2008-04-01, 18:18 | Report

Following some of the directions that I found while searching for this, I moved away a library that was supposed to be problematic ("libgstdspilpbc.so"). I also just removed the ogg library with "apt-get", but that didn't seem to make any difference...