Page 2 of 2 1 2
Reply
Thread Tools
arquitecto is offline arquitecto
2008-10-20 , 11:21
Posts: 7 | Thanked: 0 times | Joined on Aug 2008 @ Portugal
#11
And the opposite... How do I remove the bootmenu?
When I boot my N810 I get the message on the top screen "Booting from...", and I want to remove that. Is it possible?
 
CyberCowboy is offline CyberCowboy
2008-10-20 , 12:29
Posts: 66 | Thanked: 6 times | Joined on May 2008
#12
well the obvious answer seems to be to give it to me since I keep losing my boot menu however are you trying to still boot from the flash just not have the menu (don't think you can do this) or you just want to boot like it did out of the box?
 
arquitecto is offline arquitecto
2008-10-20 , 13:24
Posts: 7 | Thanked: 0 times | Joined on Aug 2008 @ Portugal
#13
Give it to you???... Humm... I will think about that.

I just want to boot like it did out of the box.
 
CyberCowboy is offline CyberCowboy
2008-10-20 , 13:27
Posts: 66 | Thanked: 6 times | Joined on May 2008
#14
Than the easiest way would be to simply re-flash it with the latest firmware version. Be sure to backup first though as you'd lose any existing data on the IT
 

The Following User Says Thank You to CyberCowboy For This Useful Post:
arquitecto is offline arquitecto
2008-10-20 , 14:39
Posts: 7 | Thanked: 0 times | Joined on Aug 2008 @ Portugal
#15
I was looking for other solution without re-flash.
Thanks cyberCowboy.
 
penguinbait's Avatar
penguinbait is offline penguinbait
2008-10-20 , 15:21
Posts: 3,096 | Thanked: 1,525 times | Joined on Jan 2006 @ Michigan, USA
#16
Originally Posted by arquitecto View Post
I was looking for other solution without re-flash.
Thanks cyberCowboy.
1st of all, are you getting the bootmenu? When you boot, does a menu appear, or does it just say "booting from" and keep going?

If you are not getting the menu, you can do this to fix it.

TROUBLESHOOTING

MENU WILL NOT APPEAR
boot to flash and open xterm and become root and run the following command:
chroot /mnt/initfs cal-tool –set-root-device ask:flash
Instead of flash, you can also set the default boot image to be mmcX

mmc2 is partition 2 on internal
mmc3 is partition 3 on internal
mmc12 is partition 2 on external
mmc13 is partition 3 on external

Your menu will not display until you set it to ask:somthing then reboot.

----------------------------
If you want to remove bootmenu, you would need to reflash the initfs. The only way to do this would be to unpack the initfs from the Fiasco image and flash it from a Linux computer. The one problem with this is, there is no Fiasco image for 36-5 (at least I don't think there is.) So I guess I am not sure.

-----------------------

Also there should be a backup in /root/install-tools/initfs.orig.jffs2

You would need a linux computer to flash back the initfs image or possibly initfs_flasher may work, I don't recall off the top of my head
__________________
To all my Maemo friends. I will no longer be monitoring any of my threads here on a regular basis. I am no longer supporting anything I did under maemo at maemo.org. If you need some help with something you can reach me at tablethacker.com or www.facebook.com/penguinbait. I have disabled my PM's here, and removed myself from Council email and Community mailing list. There has been some fun times, see you around.
 
arquitecto is offline arquitecto
2008-10-20 , 15:53
Posts: 7 | Thanked: 0 times | Joined on Aug 2008 @ Portugal
#17
The menu only appears if I "Press and Hold the Menu Key for Advanced Boot Menu...". Otherwise it will boot from Flash and I get a message saying "Booting from Flash (mtdblock4 jffs2)".

I'm not using any other boot, so I don't need the boot menu.
 
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 23:43.

Contact Us - Home - Archive - Top