First of all, let me thank you guys for your excellent work. Really very excellent stuff.
Secondly, I'm using an n800 and I've followed the NITdroid install instructions and I'm afraid it isn't working for me. At the moment, it displays the Nokia screen, followed by the animated NITdroid screen and then reboots. Over and over. I've tried flashing the kernel with and without --enable-rd-mode to see if that made a difference, but it has not.
Thirdly, your website won't work for me on my desktop unless I use vtunnel, however it does work on my tablet. Strange?
Thanks in advance for any advice you can give me regarding NITdroid.
First of all, let me thank you guys for your excellent work. Really very excellent stuff.
Thank you.
Originally Posted by
Secondly, I'm using an n800 and I've followed the NITdroid install instructions and I'm afraid it isn't working for me. At the moment, it displays the Nokia screen, followed by the animated NITdroid screen and then reboots. Over and over. I've tried flashing the kernel with and without --enable-rd-mode to see if that made a difference, but it has not.
Can you try with "--set-rd-flags=no-omap-wd,no-retu-wd,no-lifeguard-reset,serial-console" and check again? I presume some hardware watchdog is not being handled properly for N800 and is triggering a reboot.
BTW when you get to the NITdroid animation you can fire ADB (sudo ./adb shell) and run logcat, pasting the output would be very useful to improve the N800 support.
Originally Posted by
Thirdly, your website won't work for me on my desktop unless I use vtunnel, however it does work on my tablet. Strange?
The site resolves and works on both IPv4 and IPv6, maybe you have not working enabled IPv6 on your desktop and just IPv4 on your tablet, that's why it works on your tablet, probably.
Can you try with "--set-rd-flags=no-omap-wd,no-retu-wd,no-lifeguard-reset,serial-console" and check again? I presume some hardware watchdog is not being handled properly for N800 and is triggering a reboot.
BTW when you get to the NITdroid animation you can fire ADB (sudo ./adb shell) and run logcat, pasting the output would be very useful to improve the N800 support.
The extra flags don't work. Same problem as before: Nokia splash, NITdroid animated splash, reboot.
Edit: I'm install the SDK to use adb. I will attempt to get you an output this evening sometime. Thanks!
Edit 2: ADB lists no devices when my n800 is connected via usb, and the i have issued the command 'sudo adb start-server'
