Reply
Thread Tools
Posts: 46 | Thanked: 1 time | Joined on Jan 2007 @ Tampere, Finland
#31
Originally Posted by ju55i View Post
I got my N800 back to its feets by using these instructions:
http://maemo.org/pipermail/maemo-use...ry/002768.html

Basicly you put your N800 to R&D mode, set flag, reflash, unset flag and then reboot. After succesful boot you can set the R&D mode off. That worked for me!
THANKS! I got it to work with this One problem remains though...i can't set the flag off anymore...well I'll try again tomorrow if it works But the tablet works now and seems to be ok.

Last edited by Gluz; 2007-01-19 at 22:52.
 
Posts: 147 | Thanked: 5 times | Joined on Jan 2007
#32
I used the flag (inconvenient that there is only a CLI flasher for Linux, but anyhow).

Any reason not to just leave it in R&D mode?
 
aflegg's Avatar
Posts: 1,463 | Thanked: 81 times | Joined on Oct 2005 @ UK
#33
On the 770, R&D mode made the device come on with the slightest touch of the power button, rather than a long press.

This could be the cause of the oft-reported "my 770 comes on by itself!" problem (which I suffered with before reverting out of R&D mode)
__________________
Andrew Flegg -- mailto:andrew@bleb.org | http://www.bleb.org
Now known as
Jaffa
 
Posts: 46 | Thanked: 1 time | Joined on Jan 2007 @ Tampere, Finland
#34
I posted earlier that I couldn't get the R&D mode off. Before I tried with ./flasher-3.0 --clear-rd-flags=no-lifeguard-reset and it said it went ok, but it still was in R&D mode. Now I tried with ./flasher-3.0 --disable-rd-mode and it worked and now ./flasher-3.0 --query-rd-mode says "The device is in production mode" and it works like at the beginning.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 15:51.